scholarly journals Void ratio effect on dynamic shear modulus and shear wave velocity for soil stiffness in Banda Aceh and Aceh Besar

2020 ◽  
Vol 1572 ◽  
pp. 012090
Author(s):  
M Munirwansyah ◽  
R P Munirwan ◽  
V Listia ◽  
H Munirwan ◽  
Z Melinda
Keyword(s):  
Shear Modulus ◽  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Void Ratio ◽  
Dynamic Shear Modulus ◽  
Dynamic Shear ◽  
Soil Stiffness ◽  
Ratio Effect ◽  
Banda Aceh

scholarly journals CHARACTERIZING A TROPICAL SOIL VIA SEISMIC IN SITU TESTS

2019 ◽  
Vol 37 (3) ◽  
pp. 263
Author(s):  
Breno Padovezi Rocha ◽  
Heraldo Luiz Giacheti
Keyword(s):  
Shear Modulus ◽  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Soil Profile ◽  
Site Investigation ◽  
Tropical Soil ◽  
Engineering Properties ◽  
Foundation Engineering

ABSTRACT. The shear wave velocity (Vs) is an important geotechnical parameter to be used in dynamic problems (e.g. earthquakes and vibration problems) as well as in static deformation analysis such as excavations and foundation engineering design. There are several in situ seismic tests to determine Vs such as the crosshole and the downhole techniques, as well as hybrid tests (e.g. seismic dilatometer – SDMT). This paper presents crosshole, downhole and SDMT tests carried out in a typical tropical soil profile from Brazil. Advantages and limitations regarding the test procedures and interpretation are briefly presented and differences observed among Vs determined by these techniques are discussed. Shear wave velocities (Vs) estimated from the crosshole, downhole and SDMT tests ranging from 194 to 370 m/s. The shear wave velocity suggests that the experimental site could be divided into two strata, which are in agreement with soil profile description. The maximum shear modulus (G0) calculated from the Vs by theory of elasticity can be used to show the investigated tropical soil is a typical unusual geomaterial. This article also emphasizes that the SDMT is a useful test for site investigation since it allows a great means for profiling geostratigraphy and soil engineering properties during routine site investigation as well as for dynamics problems. Keywords: shear wave velocity, maximum shear modulus, crosshole, downhole, SDMT.RESUMO. A velocidade de onda cisalhante (Vs) é um parâmetro geotécnico empregado em análises dinâmicas (terremotos e problemas de vibração), bem como em análises estáticas (escavações e projeto de fundações). Existem vários ensaios sísmicos de campo para a determinação de Vs, entre eles as técnicas crosshole e downhole, e os ensaios híbridos (por exemplo, dilatômetro sísmico – SDMT). Este artigo apresenta os ensaios crosshole, downhole e SDMT realizados em um perfil típico de solo tropical do Brasil, as vantagens e limitações dos procedimentos de ensaio e de interpretação são brevemente apresentadas, e as diferenças observadas entre os valores de Vs determinados pelas diferentes técnicas são discutidas. Os perfis de Vs determinados pelas diferentes técnicas variaram de 194 a 370 m/s. A velocidade da onda cisalhante sugere que o campo experimental investigado pode ser dividido em dois horizontes, os quais estão de acordo com a descrição do perfil do solo estudado. O módulo de cisalhamento máximo (G0), calculado a partir de Vs pela teoria da elasticidade, pode ser utilizado para demonstrar o comportamento não convencional do solo investigado. Este artigo também enfatiza que o SDMT é um ensaio geotécnico útil para a investigação geotécnica do subsolo, uma vez que permite a definição do perfil estratigráfico e a estimativa de parâmetros estáticos e dinâmicos de um projeto.Palavras-chave: velocidade de onda cisalhante, módulo de cisalhamento máximo, crosshole, downhole, SDMT.

scholarly journals Shear modulus of hydrate bearing calcareous sand-fines mixture

2019 ◽  
Vol 92 ◽  
pp. 04002
Author(s):  
Litong Ji ◽  
Abraham C.F. Chiu ◽  
Lu Ma ◽  
Chao Jian
Keyword(s):  
Shear Modulus ◽  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Hydrate Formation ◽  
Confining Pressure ◽  
Specimen Preparation ◽  
Bender Element ◽  
Calcareous Sand ◽  
Bender Element Test

This article presents a laboratory study on the maximum shear modulus of a THF hydrate bearing calcareous sand (CS)–fines mixture. The maximum shear modulus was inferred from the shear wave velocity measured from the bender elements installed in a temperature-controlled triaxial apparatus. The specimen preparation procedures were specially designed to mimic the hydrate formation inside the internal pores of CS. A trial test was conducted to validate whether the shear wave velocity is a feasible parameter to monitor the formation and dissociation of hydrate in the CS-fines mixture. Based on the bender element test results, hydrate has a more profound effect than confining pressure on enhancing the maximum shear modulus of CS-fines mixture.

Changes in dynamic shear moduli of carbonate rocks with fluid substitution

Geophysics ◽  
2009 ◽  
Vol 74 (3) ◽  
pp. E135-E147 ◽  
Author(s):  
Gregor T. Baechle ◽  
Gregor P. Eberli ◽  
Ralf J. Weger ◽  
Jose Luis Massaferro
Keyword(s):  
Shear Modulus ◽  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Water Saturation ◽  
Acoustic Properties ◽  
P Wave ◽  
Shear Moduli ◽  
Water Saturated ◽  
Fluid Interaction

To assess saturation effects on acoustic properties in carbonates, we measure ultrasonic velocity on 38 limestone samples whose porosity ranges from 5% to 30% under dry and water-saturated conditions. Complete saturation of the pore space with water causes an increase and decrease in compressional- and shear-wave velocity as well as significant changes in the shear moduli. Compressional velocities of most water-saturated samples are up to [Formula: see text] higher than the velocities of the dry samples. Some show no change, and a few even show a decrease in velocity. Shear-wave velocity [Formula: see text] generally decreases, but nine samples show an increase of up to [Formula: see text]. Water saturation decreases the shear modulus by up to [Formula: see text] in some samples and increases it by up to [Formula: see text] in others. The average increase in the shear modulus with water saturation is [Formula: see text]; the average decrease is [Formula: see text]. The [Formula: see text] ratio shows an overall increase with water saturation. In particular, rocks displaying shear weakening have distinctly higher [Formula: see text] ratios. Grainstone samples with high amounts of microporosity and interparticle macro-pores preferentially show shear weakening, whereas recrystallized limestones are prone to increase shear strengths with water saturation. The observed shear weakening indicates that a rock-fluid interaction occurs with water saturation, which violates one of the assumptions in Gassmann’s theory. We find a positive correlation between changes in shear modulus and the inability of Gassmann’s theory to predict velocities of water-saturated samples at high frequencies. Velocities of water-saturated samples predicted by Gassmann’s equation often exceed measured values by as much as [Formula: see text] for samples exhibiting shear weakening. In samples showing shear strengthening, Gassmann-predicted velocity values are as much as [Formula: see text] lower than measured values. In 66% of samples, Gassmann-predicted velocities show a misfit to measured water-saturated P-wave velocities. This discrepancy between measured and Gassmann-predicted velocity is not caused solely by velocity dispersion but also by rock-fluid interaction related to the pore structure of carbonates. Thus, a pore analysis should be conducted to assess shear-moduli changes and the resultant uncertainty for amplitude variation with offset analyses and velocity prediction using Gassmann’s theory.

Consolidation characteristics of hydraulically deposited tailings obtained from shear wave velocity (Vs) measurements in triaxial and oedometric cells with piezoelectric ring-actuator technique (P-RAT)

2020 ◽  
pp. 1-14 ◽  
Author(s):  
Louis-Philippe Grimard ◽  
Mourad Karray ◽  
Michael James ◽  
Michel Aubertin
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Void Ratio ◽  
Cone Penetration ◽  
Confining Stress ◽  
Overconsolidation Ratio ◽  
Cone Penetration Testing ◽  
Tailings Impoundment ◽  
P Rat

This paper presents the main results of a laboratory study of the use of shear wave velocity, Vs, to characterize hydraulically deposited tailings on the basis of density (void ratio), mean effective stress, and overconsolidation ratio. Tailings specimens from a gold mine in western Quebec were prepared in triaxial and oedometric cells in a manner that simulates hydraulic deposition. The specimens were consolidated isotropically and anisotropically (stress ratio, K of 0.38). Vs measurements were performed at each load increment using the piezoelectric ring-actuator technique (P-RAT). Correlations relating shear wave velocity to the void ratio, confining stress, and overconsolidation ratio of the tailings are presented. These laboratory correlations can be used for the characterization of the tailings by in situ Vs measurement. The application of these correlations to seismic cone penetration testing in an actual tailings impoundment is also presented.

Estimating the undrained strength of sand: a theoretical framework

1995 ◽  
Vol 32 (5) ◽  
pp. 859-870 ◽  
Author(s):  
Catherine E. Fear ◽  
Peter K. Robertson
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Void Ratio ◽  
Triaxial Compression ◽  
State Parameter ◽  
In Situ Tests ◽  
Initial State ◽  
Undrained Strength

A framework for estimating the ultimate undrained steady state shear strength of sand (Su) from in situ tests, which combines the theory of critical state soil mechanics with shear wave velocity measurements, is presented. For a particular direction of undrained loading, samples of a given sand at a constant void ratio will reach the same Su, despite the magnitude of the initial effective confining stresses. Unique Su/p′ or [Formula: see text] ratios for a given direction of loading exist for a particular sand only if state parameter is constant throughout the deposit. Normalized shear wave velocity, Vs1, can be correlated with void ratio and is therefore used to estimate Su for a given initial state and direction of loading. Strengths in triaxial compression are examined in this paper; however, the same framework can be used to estimate strengths under other directions of loading. The Su–Vs1 relationship is shown to be relatively sensitive and should be used more as a screening tool rather than an accurate means of predicting Su. Vs1 is converted to equivalent values of SPT (N1)60 and CPT qc1, and the results are compared with the current methods of estimating Su. Key words : in situ testing, liquefaction, sand, undrained strength.

Development of global correlation models between in situ stress-normalized shear wave velocity and soil unit weight for plastic soils

2016 ◽  
Vol 53 (10) ◽  
pp. 1600-1611 ◽  
Author(s):  
Sung-Woo Moon ◽  
Taeseo Ku
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Void Ratio ◽  
Unit Weight ◽  
Model Parameters ◽  
Site Specific ◽  
Global Correlation ◽  
Soil Unit

Shear wave velocity (Vs) in geo-materials is strongly dependent on factors such as stress state, void ratio, and soil structure. Stress-dependency and void-ratio dependency can be represented by the equations [Formula: see text] and Vs = a(e)b (where α and a are material constants; exponents β and b represent the sensitivity of stress and the void dependent effect, respectively; [Formula: see text] is effective confining stress; e is void ratio), respectively. To consider the effect of soil disturbance and stress relief in geo-materials, shear wave velocity is often required to be normalized by adopting the site-specific model parameters (β or b). Based on a special in situ database compiled from 156 well-documented test sites that include various geo-materials, this study presents (i) the apparent relationships of the model parameters α and β for all soil and rock materials as well as a and b for all soil materials, (ii) new global correlations between soil unit weight and two types of stress-normalized shear wave velocities (Vs1 and Vsn), instead of the conventional Vs – soil unit weight relationship for clays, and (iii) the best-fitted multi-regression models between soil unit weight and site-specifically normalized shear wave velocity as well as the plasticity index for plastic soils. Moreover, this study presents the importance of site-specific stress normalization (Vsn) in creating a better correlation model. The proposed relationships offer first-order assessments of soil unit weight within the ranges of available data, which are also approximately guided by a hyperbolic unit weight model with depth.

scholarly journals Small strain stiffness in overconsolidated Pliocene clays

2013 ◽  
Vol 45 (2) ◽  
pp. 169-181 ◽  
Author(s):  
Katarzyna Markowska-Lech ◽  
Mariusz Lech ◽  
Marek Bajda ◽  
Alojzy Szymański
Keyword(s):  
Shear Modulus ◽  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Cohesive Soil ◽  
Small Strain ◽  
Soil Parameters ◽  
Small Strain Stiffness ◽  
Triaxial Apparatus ◽  
Triaxial Cell

Abstract Small strain stiffness in overconsolidated Pliocene clays. A huge development of technical infrastructure, including the construction of many high-rise buildings, roads, railroads and extension of subway lines, took place over the recent years in Poland. Therefore, numerous planned investment projects require geotechnical data documenting the variation of soil parameters found in the subsoil. The shear wave velocity is one of the most important input parameters to represent the stiffness of the soil deposits. This paper focuses on the methods and devices using measurements of the shear wave velocity to estimate the initial shear modulus in cohesive soil. It is preferable to measure VS by in situ wave propagation tests, however it is often economically not feasible in all regions of Poland. Hence, a reliable correlation between shear wave velocity and parameters measured in triaxial cell or static penetration parameters would be a considerable advantage. This study shows results obtained from the bender elements tests and field techniques - seismic cone penetration test and seismic flat dilatometer, performed on overconsolidated cohesive soils in Warsaw. On the basis of the test results possible correlations between shear wave velocity (initial shear modulus), mean effective stress and void ratio are considered and four original empirical relationships are proposed. Moreover, the proposed formulas by two different techniques using triaxial apparatus and also RCPT cone were examined. The proposed formulas show a reasonable agreement with direct shear wave velocity profiles for clays and might be incorporated into routine laboratory and field practice

Sign in / Sign up

Export Citation Format

Share Document