scholarly journals Standard absolute pressure transducers MIDA-SA-15-S for vacuum equipment

2021 ◽  
Vol 1799 (1) ◽  
pp. 012039
Author(s):  
Y A Vaskov ◽  
E G Savchenko ◽  
V M Stuchebnikov
1984 ◽  
Vol 1 (19) ◽  
pp. 51 ◽  
Author(s):  
Kevin R. Bodge ◽  
Robert G. Dean

The potential error of estimating the small pressure gradient under a directional wave field through the subtraction or comparison of relatively large total-head signals from adjacent pressure transducers in an array is avoided through the use of differential pressure transducers which measure directly the pressure gradients. A device which utilizes four differential pressure tranducers placed orthogonally about one absolute pressure transducer, (the "DPG"), was developed and field-tested at the U.S. Army Corps of Engineers Coastal Engineering Research Center Field Research Facility, Duck, North Carolina. The first five directional Fourier coefficients of the directional ocean spectra were developed from the DPG data, and although no other in_ situ directional wave monitors were available for comparison, the directional peak determined from the DPG agreed well with simultaneous High Frequency (HF) radar data. The DPG instrument is about one-half the size and less than one-sixth the weight of conventional pressure sensor arrays. The field establishment of the orientation of directional-measuring instruments is also discussed.


2005 ◽  
Vol 22 (12) ◽  
pp. 1933-1939 ◽  
Author(s):  
Vijay Kumar ◽  
Antony Joseph ◽  
R. G. Prabhudesai ◽  
S. Prabhudesai ◽  
Surekha Nagvekar ◽  
...  

Abstract Simultaneous calibrations of three temperature-compensated piezoresistive ruggedized precision “absolute” pressure transducers (Honeywell model PPTR0040AP5VB-BD), which have been designed specially for long-term coastal oceanographic and limnological measurements, have been carried out at four differing temperatures (10°, 20°, 30°, and 40°C) to evaluate their suitability for such applications. The full-scale pressure range of these shallow water absolute pressure sensors is ≈ 2800 hPa (equivalent to water depth of ≈ 18 m). Measurement results have been used to examine the transducers’ performance indicators, such as zero-point offset, accuracy, linearity, hysteresis, temperature sensitivity, and slope. Differing piezoresistive ruggedized precision absolute pressure transducers (PPTRs) exhibited differing zero-point offset values, ranging from 2 to −79 hPa. Temperature sensitivity of zero-point offset was ≈0.3 hPa over the temperature range 10°–40°C. The mean hysteresis over the full-scale absolute pressure range (≈2800 hPa) varied from approximately 2 to 8 hPa over the temperature range 10°–40°C. The slope of the least squares–fitted linear graph (taking the mean of ascending and descending pressures) was close to the ideal value of unity (deviation from 1 over the temperature range 10°–40°C was in the range of −0.001 to +0.005). Linearity was excellent, its mean over the entire pressure range being between ≈ −0.006% and 0.008% of full-scale (FS) over the above temperature range. The worst performance was exhibited at input pressures below ≈1500 hPa. Zero-point offset has played a significant role in deteriorating the accuracy of the PPTR, the mean accuracy (within ≈0.1% and −5%) having been exhibited by those transducers having offsets of 2 and −79 hPa, respectively. The mean accuracy exhibited temperature sensitivity of ≈1% in the range 10°–20°C and negligible sensitivity beyond 20°C. Use of a calibration equation significantly improved the mean static accuracy obtainable from the PPTR, to between −0.04% and 0.01% of FS. Evaluation results have indicated that a suitably calibrated temperature-compensated Honeywell PPTR provides an alternate cost-effective means for pressure measurements for coastal oceanographic and limnological studies.


2021 ◽  
Author(s):  
Joseph Shannon ◽  
Fengjing Liu ◽  
Matthew Van Grinsven ◽  
Randall Kolka ◽  
Thomas Pypker

1987 ◽  
Vol 15 (03n04) ◽  
pp. 147-153 ◽  
Author(s):  
Sook Hyang Yoon ◽  
Yoshihisa Koga ◽  
Isao Matsumoto ◽  
Etsutaro Ikezono

One component of Oriental medical diagnosis is pulse diagnosis. To make this method more objective, three pressure transducers were positioned over the radial artery and the absolute pressure of 50,100 and 150 g as applied at three positions to stimulate the classical pulse diagnosis. The transient pressure changes at the three positions were not equal even when the same absoulte pressure was applied. Pressures were compared in superficial and deep locations, right and left wrist. The largest deflection was consdered as excess and the smallest as depletion in twelve meridians.


Author(s):  
Heinz Gross ◽  
Katarina Krusche ◽  
Peter Tittmann

Freeze-drying followed by heavy metal shadowing is a long established and straight forward approach to routinely study the structure of dehydrated macromolecules. Very thin specimens such as isolated membranes or single macromolecules are directly adsorbed on C-coated grids. After rapid freezing the grids are transferred into a suitable vacuum equipment for freeze-drying and heavy metal shadowing.To improve the resolution power of shadowing films we introduced shadowing at very low specimen temperature (−250°C). To routinely do that without the danger of contamination we developed in collaboration with Balzers an UHV (p≤10-9 mbar) machine (BAF500K, Fig.2). It should be mentioned here that at −250°C the specimen surface acts as effective cryopump for practically all impinging residual gas molecules from the residual gas atmosphere.Common high resolution shadowing films (Pt/C, Ta/W) have to be protected from alterations due to air contact by a relatively thick C-backing layer, when transferred via atmospheric conditions into the TEM. Such an additional C-coat contributes disturbingly to the contrast at high resolution.


Sign in / Sign up

Export Citation Format

Share Document