scholarly journals Features of device cooling in wiggler synchrotron workstations

2021 ◽  
Vol 2057 (1) ◽  
pp. 012028
Author(s):  
O A Kabov ◽  
Ya V Zubavichus ◽  
K E Cooper ◽  
M V Pukhovoy ◽  
V V Vinokurov ◽  
...  
Keyword(s):  
Radiation Power ◽  
High Vacuum ◽  
High Energy ◽  
High Energy Density ◽  
Ansys Fluent ◽  
Optical Elements ◽  
Cooling Systems ◽  
Fluent Software ◽  
Stress And Strain Distribution ◽  
Ring Source

Abstract The construction of the «Siberian Photon Ring Source», the SKIF synchrotron, in Novosibirsk is underway. At the first stage, six research workstations will be created, most of the devices of which work in a high vacuum. Synchrotron radiation is generated by superconducting Wigglers for two stations. The total radiation power is approaching 49 kW, and the power density on the axis is 92 kW/mrad2. The high energy density of the beam creates quite difficult conditions for the thermal management of optical elements at the workstations. The article presents specific requirements for cooling devices, an overview of the used and promising cooling systems is made, an example of calculating the temperature, stress and strain distribution in a diamond filter with a thickness of 300 microns using the ANSYS Fluent software package is given.

scholarly journals Device cooling features in wiggler synchrotron workstations

2021 ◽  
Vol 2119 (1) ◽  
pp. 012129
Author(s):  
O A Kabov ◽  
Ya V Zubavichus ◽  
K E Cooper ◽  
M V Pukhovoy ◽  
V V Vinokurov ◽  
...  
Keyword(s):  
Thermal Management ◽  
Thermal Load ◽  
Radiation Power ◽  
High Energy ◽  
Optical Devices ◽  
High Energy Density ◽  
Optical Elements ◽  
Cooling Systems ◽  
Diamond Plate ◽  
Photon Source

Abstract Construction of the 4+ generation Siberian circular photon source (SKIF synchrotron) has started in Novosibirsk. It will initially be equipped with six research workstations. For two stations, synchrotron radiation is generated by superconducting wigglers, whose radiation power approaches 49 kW, and the power density on the axis is 92 kW/mrad2. Most of the optical devices of the stations operate in a vacuum. The high energy density of the synchrotron beamline and the requirements for the values of thermal deformations lead to difficult conditions for the thermal management of optical elements. The article provides an overview of the applied and promising cooling systems; an example of a 3D calculation of a thermal diamond filter of workstation 1-5 is given, the limit for the thermal load of the filter, at which the temperature of the diamond plate will not exceed 600 °C, is estimated.

Aerodynamic Analysis of High Energy Efficiency Vehicles by Computational Fluid Dynamics Simulation

2019 ◽  
Vol 32 ◽  
pp. 41-51 ◽  
Author(s):  
Victor Fuerst Pacheco ◽  
Diego Alves de Miranda
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Energy Efficiency ◽  
High Energy ◽  
Dynamics Simulation ◽  
Computational Fluid Dynamics Simulation ◽  
Ansys Fluent ◽  
Fluent Software ◽  
High Energy Efficiency ◽  
Object Of Study

The growing demand for energy efficiency gains in vehicles has led to several advances in more technological and efficient driving units, projects using lighter and more resistant materials and, in particular, a deeper study of aerodynamic studies in order to understand the fluid flow around the object of study. This work presents an aerodynamic study for a vehicle of high-energy efficiency, through computational fluid dynamics simulation in Ansys Fluent software. The main objective is to obtain the traction and drag force vectors acting on the vehicle at different speeds and to better understand the airflow before, during and after contact with the vehicle. With the possession of results, it was facilitated the implementation of improvements that enabled the vehicle to operate even more efficiently.

Characterization of thermal barrier coatings formed by electon-beam physical vapor deposition (EB-PVD)

1989 ◽  
Vol 47 ◽  
pp. 426-427
Author(s):  
Ozer Unal
Keyword(s):  
Thermal Barrier Coatings ◽  
Physical Vapor Deposition ◽  
Ceramic Coating ◽  
High Vacuum ◽  
Ceramic Coatings ◽  
High Energy ◽  
Thermal Barrier ◽  
Protective Oxide ◽  
Barrier Coatings ◽  
Energy Beam

Interest in ceramics as thermal barrier coatings for hot components of turbine engines has increased rapidly over the last decade. The primary reason for this is the significant reduction in heat load and increased chemical inertness against corrosive species with the ceramic coating materials. Among other candidates, partially-stabilized zirconia is the focus of attention mainly because ot its low thermal conductivity and high thermal expansion coefficient.The coatings were made by Garrett Turbine Engine Company. Ni-base super-alloy was used as the substrate and later a bond-coating with high Al activity was formed over it. The ceramic coatings, with a thickness of about 50 μm, were formed by EB-PVD in a high-vacuum chamber by heating the target material (ZrO2-20 w/0 Y2O3) above its evaporation temperaturef >3500 °C) with a high-energy beam and condensing the resulting vapor onto a rotating heated substrate. A heat treatment in an oxidizing environment was performed later on to form a protective oxide layer to improve the adhesion between the ceramic coating and substrate. Bulk samples were studied by utilizing a Scintag diffractometer and a JEOL JXA-840 SEM; examinations of cross-sectional thin-films of the interface region were performed in a Philips CM 30 TEM operating at 300 kV and for chemical analysis a KEVEX X-ray spectrometer (EDS) was used.

Transmission Electron Microscopy of Epitaxial silicides grown by ultra high vacuum deposition

1989 ◽  
Vol 47 ◽  
pp. 462-463
Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Diffraction ◽  
High Vacuum ◽  
High Energy ◽  
Energy Electron ◽  
Ultra High Vacuum ◽  
Ex Situ ◽  
Transmission Electron

The silicides CoSi2 and NiSi2 are both metallic with the fee flourite structure and lattice constants which are close to silicon (1.2% and 0.6% smaller at room temperature respectively) Consequently epitaxial cobalt and nickel disilicide can be grown on silicon. If these layers are formed by ultra high vacuum (UHV) deposition (also known as molecular beam epitaxy or MBE) their thickness can be controlled to within a few monolayers. Such ultrathin metal/silicon systems have many potential applications: for example electronic devices based on ballistic transport. They also provide a model system to study the properties of heterointerfaces. In this work we will discuss results obtained using in situ and ex situ transmission electron microscopy (TEM).In situ TEM is suited to the study of MBE growth for several reasons. It offers high spatial resolution and the ability to penetrate many monolayers of material. This is in contrast to the techniques which are usually employed for in situ measurements in MBE, for example low energy electron diffraction (LEED) and reflection high energy electron diffraction (RHEED), which are both sensitive to only a few monolayers at the surface.

Modifications of a JEOL 2000EX TEM for insSitu surface studies

1993 ◽  
Vol 51 ◽  
pp. 640-641
Author(s):  
Michael T. Marshall ◽  
Xianghong Tong ◽  
J. Murray Gibson
Keyword(s):  
Electron Diffraction ◽  
Surface Science ◽  
Film Growth ◽  
High Vacuum ◽  
High Energy ◽  
Energy Electron ◽  
Ultra High Vacuum ◽  
Transmission Electron ◽  
Fundamental Insight

We have modified a JEOL 2000EX Transmission Electron Microscope (TEM) to allow in-situ ultra-high vacuum (UHV) surface science experiments as well as transmission electron diffraction and imaging. Our goal is to support research in the areas of in-situ film growth, oxidation, and etching on semiconducter surfaces and, hence, gain fundamental insight of the structural components involved with these processes. The large volume chamber needed for such experiments limits the resolution to about 30 Å, primarily due to electron optics. Figure 1 shows the standard JEOL 2000EX TEM. The UHV chamber in figure 2 replaces the specimen area of the TEM, as shown in figure 3. The chamber is outfitted with Low Energy Electron Diffraction (LEED), Auger Electron Spectroscopy (AES), Residual Gas Analyzer (RGA), gas dosing, and evaporation sources. Reflection Electron Microscopy (REM) is also possible. This instrument is referred to as SHEBA (Surface High-energy Electron Beam Apparatus).The UHV chamber measures 800 mm in diameter and 400 mm in height. JEOL provided adapter flanges for the column.

Pilot-scale combustion studies with kraft lignin in a powder burner and a CFB boiler

TAPPI Journal ◽  
2010 ◽  
Vol 9 (6) ◽  
pp. 24-30 ◽  
Author(s):  
NIKLAS BERGLIN ◽  
PER TOMANI ◽  
HASSAN SALMAN ◽  
SOLVIE HERSTAD SVÄRD ◽  
LARS-ERIK ÅMAND
Keyword(s):  
Circulating Fluidized Bed ◽  
Black Liquor ◽  
Chloride Content ◽  
Pilot Scale ◽  
High Energy ◽  
Kraft Lignin ◽  
High Energy Density ◽  
Alkali Chloride ◽  
Cfb Boiler ◽  
Solid Biofuel

Processes have been developed to produce a solid biofuel with high energy density and low ash content from kraft lignin precipitated from black liquor. Pilot-scale tests of the lignin biofuel were carried out with a 150 kW powder burner and a 12 MW circulating fluidized bed (CFB) boiler. Lignin powder could be fired in a powder burner with good combustion performance after some trimming of the air flows to reduce swirl. Lignin dried to 10% moisture content was easy to feed smoothly and had less bridging tendencies in the feeding system than did wood/bark powder. In the CFB boiler, lignin was easily handled and cofired together with bark. Although the filter cake was broken into smaller pieces and fines, the combustion was not disturbed. When cofiring lignin with bark, the sulfur emission increased compared with bark firing only, but most of the sulfur was captured by calcium in the bark ash. Conventional sulfur capture also occurred with addition of limestone to the bed. The sulfur content in the lignin had a significantly positive effect on reducing the alkali chloride content in the deposits, thus reducing the high temperature corrosion risk.

A HIGH ENERGY DENSITY ZINC/OXYGEN BATTERY SYSTEM

1966 ◽  
Author(s):  
S. CHODOSH ◽  
E. KATSOULIS ◽  
M. ROSANSKY
Keyword(s):  
Energy Density ◽  
High Energy ◽  
High Energy Density ◽  
Battery System

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Sign in / Sign up

Export Citation Format

Share Document