scholarly journals Calculating the effective thickness of the thermal barrier coating

2021 ◽  
Vol 2057 (1) ◽  
pp. 012135
Author(s):  
V V Lukashov ◽  
V S Naumkin
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Temperature Distribution ◽  
Thermal Barrier Coating ◽  
Significant Contribution ◽  
Effective Thickness ◽  
Thermal Barrier ◽  
Final Temperature ◽  
Barrier Coating

Abstract The paper presents the results of numerical simulation of heat transfer at the interaction of a hot impact nitrogen jet with a ceramic thermal barrier coating 7YSZ based on ZrO2 with the addition of 7% Y2O3. The radiant component of heat transfer is shown to make a significant contribution to the final temperature distribution on the surface of the protected product.

Preliminary Testing of Metal-Based Thermal Barrier Coating in a Spark-Ignition Engine

2009 ◽  
Author(s):  
Michael Marr ◽  
James S. Wallace ◽  
Larry Pershin ◽  
Sanjeev Chandra ◽  
Javad Mostaghimi
Keyword(s):  
Heat Transfer ◽  
Thermal Barrier Coating ◽  
Substrate Surface ◽  
Temperature Fluctuations ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Thermal Barrier ◽  
Cylinder Wall ◽  
Test Results ◽  
Barrier Coating

A novel metal-based thermal barrier coating was tested in a spark-ignition engine. The coating was applied to the surface of aluminum plugs and exposed to in-cylinder conditions through ports in the cylinder wall. Temperatures were measured directly behind the coating and within the plug 3 and 11 mm from the surface. In-cylinder pressures were measured and analyzed to identify and quantify knock. Test results suggest the coating does not significantly reduce overall heat transfer, but it does reduce the magnitude of temperature fluctuations at the substrate surface. It was found that heat transfer can be reduced by reducing the surface roughness of the coating. The presence of the coating did not promote knock.

scholarly journals Investigation of Cooling Performances of a Non-Film-Cooled Turbine Vane Coated with a Thermal Barrier Coating Using Conjugate Heat Transfer

Energies ◽  
2018 ◽  
Vol 11 (4) ◽  
pp. 1000 ◽  
Author(s):  
Prasert Prapamonthon ◽  
Soemsak Yooyen ◽  
Suwin Sleesongsom ◽  
Daniele Dipasquale ◽  
Huazhao Xu ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Barrier Coating ◽  
Conjugate Heat Transfer ◽  
Thermal Barrier ◽  
Barrier Coating ◽  
Turbine Vane

Thermal Shock Experiment and Simulation of Ceramic/Metal Gradient Thermal Barrier Coating

2007 ◽  
Vol 336-338 ◽  
pp. 1818-1822
Author(s):  
Jin Sheng Xiao ◽  
Kun Liu ◽  
Wen Hua Zhao ◽  
Wei Biao Fu
Keyword(s):  
Heat Transfer ◽  
Thermal Shock ◽  
Thermal Barrier Coating ◽  
Thermal Stresses ◽  
Initial Temperature ◽  
Thermal Barrier ◽  
Water Spray ◽  
Barrier Coating ◽  
Shock Experiment ◽  
Two Stages

A thermal shock experiment is designed to explore the thermal shock properties of ceramic/metal gradient thermal barrier coating. The specimens are heated up by oxygen-acetylene flame and cooled by water spray. The experiment procedure includes two stages, heating the specimen from the initial temperature 30°C for 40s, and then cooling for 20s. The heat transfer and the associated thermal stresses produced during the thermal shock procedure are simulated by finite element method. Experimental results indicated that the specimen of gradient coating behaves better in thermal shock experiments, which agree with the results of simulation.

Preliminary Testing of Metal-Based Thermal Barrier Coating in a Spark-Ignition Engine

2010 ◽  
Vol 132 (7) ◽  
Author(s):  
Michael A. Marr ◽  
James S. Wallace ◽  
Larry Pershin ◽  
Sanjeev Chandra ◽  
Javad Mostaghimi
Keyword(s):  
Heat Transfer ◽  
Thermal Barrier Coating ◽  
Substrate Surface ◽  
Temperature Fluctuations ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Thermal Barrier ◽  
Cylinder Wall ◽  
Test Results ◽  
Barrier Coating

A novel metal-based thermal barrier coating was tested in a spark-ignition engine. The coating was applied to the surface of aluminum plugs and exposed to in-cylinder conditions through ports in the cylinder wall. Temperatures were measured directly behind the coating and within the plug 3 and 11 mm from the surface. In-cylinder pressures were measured and analyzed to identify and quantify knock. Test results suggest the coating does not significantly reduce overall heat transfer, but it does reduce the magnitude of temperature fluctuations at the substrate surface. It was found that heat transfer can be reduced by reducing the surface roughness of the coating. The presence of the coating did not promote knock.

Two-Dimensional Thermal Performance Analysis of a Semi-Transparent Spectral Zirconia Thermal Barrier Coating

2004 ◽  
Author(s):  
Nalini Uppu ◽  
Patrick F. Mensah ◽  
Ravinder Diwan
Keyword(s):  
Heat Transfer ◽  
Thermal Barrier Coating ◽  
Thermal Performance ◽  
Operating Temperature ◽  
Turbine Blades ◽  
The Other ◽  
Ceramic Layer ◽  
Thermal Barrier ◽  
Barrier Coating ◽  
Super Alloy

The performance of an aero engine can be increased in two ways: one by reducing the air requirement for the cooling of the turbine blades and secondly by increasing the turbine inlet temperature (TIT) that is operating temperature of the turbine blades. Taking into account the latter approach the blade material must withstand high temperatures of above 1350°C. For this enhancing purpose, protective coatings called the thermal barrier coatings (TBC) are being employed. The thermal barrier coating mainly consists of two layers; one is the metallic coating MCrAlY, which is the premiere layer over the substrate Ni based super alloy. The other is the ceramic layer made of Yttria Stabilized Zirconia (YSZ). Apart from these two layers, an intermediate layer of Al2O3 is formed by the oxidation of the aluminum in MCrAlY called the diffusion layer which also enhances the adhesion between the two layers. M stands for Nickel or Cobalt. The present study is an investigation on the in-situ thermal performance of TBCs by considering the ceramic layer as a semi-transparent media and varying its thickness and simultaneously increasing the operating temperature on its other boundary surface. The above thermal boundary value problem is modeled in 2-dimensions and solved numerically using the discrete ordinate model for radiative heat transfer in a commercial computational fluid dynamics and heat transfer software. Two samples of Ni based super alloy substrate with dimensions 40 × 100 × 3mm are considered; one sample with a thickness of 0.25 mm ceramic layer and the other sample with 1 mm coating thickness for transient thermal analysis. Simulated transient temperature histories are presented for use in a thermo-mechanical analysis in order to predict the failure modes in the TBC. The temperature distribution in TBC coating mainly depends on the radiative effects combined with heat conduction and convection and radiation at the material boundaries.

Development of Advance Thermal Barrier Coating in Gas Turbine

2010 ◽  
Vol 123-125 ◽  
pp. 459-462
Author(s):  
Choul Jun Choi ◽  
Jung Ki Lee ◽  
Lee Ku Kwac ◽  
Jae Yeol Kim
Keyword(s):  
Heat Transfer ◽  
High Temperature ◽  
Gas Turbine ◽  
Thermal Barrier Coating ◽  
Base Metal ◽  
Surface Profile ◽  
Thermal Barrier ◽  
Metal Base ◽  
Combustion Gas ◽  
Barrier Coating

Combustion gas of gas turbine is about 1100 ~ 1300 °C. Is doing TBC(Thermal Barrier Coating) on the base metal surface to protect rotor or blade from high temperature flame. TBC system reduced heat transfer as metal base metal. TBC system is divided by bond coating of prevent oxidation and corrosion and Top coating reduced of heat transfer by high Temperature flame. The objective of this study was to development of an advance TBC system for high Temperature (>1350°C) gas turbine components. Used coating powder developed newly in coating process, and more than 1350°C by parameter control in usable coating method develop. Internal studies looked at the effect of TBC coating thickness, material chemistry, substrate composition, surface temperature and bond coat as-sprayed surface profile/particle size on technical performance.

Analysis of Conjugate Heat Transfer Between Cooling Film and Thermal Barrier Coatings Based on Micro-Structure

2016 ◽  
Author(s):  
Yuzhang Wang ◽  
Jiali Li ◽  
Hongzhao Liu ◽  
Yiwu Weng
Keyword(s):  
Heat Transfer ◽  
Thermal Barrier Coating ◽  
Thermal Barrier Coatings ◽  
Conjugate Heat Transfer ◽  
Spatial Variations ◽  
Thermal Barrier ◽  
Micro Structure ◽  
Barrier Coatings ◽  
Barrier Coating ◽  
Micro Structures

Due to different preparation processes and long term operation, the micro structure of thermal barrier coating is different. The different micro structures have great effect on the thermal insulation properties of thermal barrier coatings and the conjugate heat transfer between the cooling film and thermal barrier coatings. In this work, different micro structures of thermal barrier coating were reconstructed using the scanning electron microscopy (SEM) images of two kinds of real thermal barrier coatings. The developed numerical calculation program based on the lattice Boltzmann method (LBM) was used to analyze the conjugate flow field and heat transfer between cooling film and porous thermal barrier coatings. The results show that the micro structures of thermal barrier coatings have a great influence on the stability of the surface film. Weak spatial variations in fluid velocity appear over the coating surface. The spatial variations in velocity over the layered coatings are larger because of its rough surfaces. The ratio of the vertical velocity to the bulk flow velocity can reach 2.5%. There is obvious vortex flow at the interface of coatings and cooling film, and weak flow in the interior perpendicular pores of the columnar coatings.

Sign in / Sign up

Export Citation Format

Share Document