scholarly journals Extrudate dehydration rate increase by modernization of the extruder vacuum chamber

2021 ◽  
Vol 640 (7) ◽  
pp. 072018
Author(s):  
A A Kurochkin ◽  
D I Frolov ◽  
V M Zimnyakov
Keyword(s):  
Vacuum Chamber ◽  
Rate Increase ◽  
Dehydration Rate

Thin Pyrolytic Graphite Films for Electron Microscope Substrates

1971 ◽  
Vol 29 ◽  
pp. 226-227 ◽  
Author(s):  
George H. N. Riddle ◽  
Benjamin M. Siegel
Keyword(s):  
Vacuum Chamber ◽  
Pyrolytic Graphite ◽  
High Vacuum ◽  
Dark Field ◽  
Ultra High Vacuum ◽  
Graphite Substrate ◽  
Nickel Substrate ◽  
Routine Procedure ◽  
Field Electron Microscopy ◽  
Dark Field Electron

A routine procedure for growing very thin graphite substrate films has been developed. The films are grown pyrolytically in an ultra-high vacuum chamber by exposing (111) epitaxial nickel films to carbon monoxide gas. The nickel serves as a catalyst for the disproportionation of CO through the reaction 2C0 → C + CO2. The nickel catalyst is prepared by evaporation onto artificial mica at 400°C and annealing for 1/2 hour at 600°C in vacuum. Exposure of the annealed nickel to 1 torr CO for 3 hours at 500°C results in the growth of very thin continuous graphite films. The graphite is stripped from its nickel substrate in acid and mounted on holey formvar support films for use as specimen substrates.The graphite films, self-supporting over formvar holes up to five microns in diameter, have been studied by bright and dark field electron microscopy, by electron diffraction, and have been shadowed to reveal their topography and thickness. The films consist of individual crystallites typically a micron across with their basal planes parallel to the surface but oriented in different, apparently random directions about the normal to the basal plane.

New replica method with plasma polymerized film by glow discharge

1988 ◽  
Vol 46 ◽  
pp. 414-415
Author(s):  
A. Tanaka ◽  
M. Yamaguchi ◽  
T. Hirano
Keyword(s):  
Power Supply ◽  
Plasma Polymerization ◽  
Vacuum Chamber ◽  
Complex Surface ◽  
Replica Method ◽  
Metal Extraction ◽  
High Voltage Power Supply ◽  
Negative Glow ◽  
Hydrocarbon Gas ◽  
Hydrocarbon Molecules

The plasma polymerization replica method and its apparatus have been devised by Tanaka (1-3). We have published several reports on its application: surface replicas of biological and inorganic specimens, replicas of freeze-fractured tissues and metal-extraction replicas with immunocytochemical markers.The apparatus for plasma polymerization consists of a high voltage power supply, a vacuum chamber containing a hydrocarbon gas (naphthalene, methane, ethylene), and electrodes of an anode disk and a cathode of the specimen base. The surface replication by plasma polymerization in negative glow phase on the cathode was carried out by gassing at 0.05-0.1 Torr and glow discharging at 1.5-3 kV D.C. Ionized hydrocarbon molecules diffused into complex surface configurations and deposited as a three-dimensionally polymerized film of 1050 nm in thickness.The resulting film on the complex surface had uniform thickness and showed no granular texture. Since the film was chemically inert, resistant to heat and mecanically strong, it could be treated with almost any organic or inorganic solvents.

A vacuum chamber for low background diffraction experiments

1996 ◽  
Vol 211 (9) ◽  
Author(s):  
R. B. Neder ◽  
M. Burghammer ◽  
Th. Grasl ◽  
H. Schulz
Keyword(s):  
Single Crystal ◽  
Vacuum Chamber ◽  
Single Crystal Diffraction ◽  
Low Background

AbstractWe developed a small vacuum chamber for very low background single crystal diffraction experiments. The chamber has been designed for a large Eulerian cradle. The

ROLE OF THE THYROID GLAND IN DEVELOPMENT AND MAINTENANCE OF RENAL HYPERTENSION IN RATS

1960 ◽  
Vol XXXIV (III) ◽  
pp. 411-429 ◽  
Author(s):  
Melvin J. Fregly ◽  
Kenneth M. Cook
Keyword(s):  
Blood Pressure ◽  
Rate Increase ◽  
Renal Hypertension ◽  
The Other ◽  
Elevated Blood Pressure ◽  
Unit Weight ◽  
Elevated Blood ◽  
Inhibition Of Growth ◽  
Testicular Size

ABSTRACT The anti-thyroid drugs, thiouracil, propylthiouracil, and methimazole, prevented both development of elevated blood pressure and cardiac hypertrophy usually accompanying kidney encapsulation with latex envelopes. These drugs also reduced elevated blood pressure of rats with hypertension of 13 to 40 weeks' duration prior to drug administration. Addition of desiccated thyroid powder to diet containing an anti-thyroid drug overcame the anti-hypertensive effect of the latter. Withdrawal of thyroid powder only was followed by return of blood pressure to previous low level within 3 weeks. The results suggest that the anti-hypertensive effect of these drugs is related directly to the hypothyroidism produced rather than to extrathyroidal effects of the drugs. Comparison of potencies of the 3 drugs in terms of anti-hypertensive effect, inhibition of growth rate, increase in testicular size, and increase in thyroid size suggests that propylthiouracil and methimazole are equally potent per unit weight of drug. Thiouracil has approximately half the potency of the other two.

Optimizing Gas-Assisted FIB Processes: The Importance of Oft-Ignored Secondary Parameters

2004 ◽  
Author(s):  
C. Rue ◽  
S. Herschbein ◽  
C. Scrudato ◽  
L. Fischer ◽  
A. Shore
Keyword(s):  
Focused Ion Beam ◽  
Vacuum Chamber ◽  
Ion Beam ◽  
Memory Capacity ◽  
Metal Films ◽  
Deposited Metal ◽  
Influence Process ◽  
Focused Beams ◽  
Gas Pressures

Abstract The efficiency of Gas-Assisted Etching (GAE) and depositions performed using the Focused Ion Beam (FIB) technique is subject to numerous factors. Besides the wellknown primary parameters recommended by the FIB manufacturer (pixel spacing, dwell time, and gas pressures), certain secondary factors can also have a pronounced effect on the quality of these gas-assisted FIB operations. The position of the gas delivery nozzle during XeF2 mills on silicon is examined and was found to affect both the milling speed and the texture on the floor of the FIB trench. Limitations arising from the memory capacity of the FIB computer can also influence process times and trench quality. Exposing the FIB vacuum chamber to TMCTS during SiO2 depositions is found to temporarily impede the performance of subsequent tungsten depositions, especially following heavy or prolonged TMCTS exposure. A delay period may be required to achieve optimal tungsten depositions following TMCTS use. Finally, the focusing conditions of the ion beam are found to have a significant impact on the resistance of FIB-deposited metal films. This effect is attributed to partial milling of the deposition film due to the intense current density of the collimated ion beam. The resistances of metal depositions performed with intentionally defocused ion beams were found to be lower than those performed with focused beams.

Inspecting Briquette Machine with Different Faults

2020 ◽  
Vol 13 ◽  
Author(s):  
Divesh Garg ◽  
Reena Garg ◽  
Vanita Garg
Keyword(s):  
Failure Rate ◽  
Rate Increase ◽  
Practical Importance ◽  
System Failure ◽  
Regenerative Point ◽  
Semi Markov Process ◽  
Major Fault ◽  
Environment Study ◽  
Burning Coal ◽  
Mean Time

Background: A briquette machine can be considered very useful in modern times as the need of energy consumption is increasing rapidly. Considering the harm to environment, study of briquette machine is the need of present times. In this paper, the operative unit is considered as briquette machine also known as bio-coal which is used for agroforestry waste. Objective: A single operative unit has been analyzed stochastically. The inspection of breakdown of a unit reveals the feasibility of the unit under the supervision of either ordinary or expert repairmen. Two types of fault are revealed by the repairmen either minor or major fault. Minor faults are repaired immediately by the same repairmen but whenever major fault held, the machine’s fault will be handled by expert person. Method: It is assumed that the repair needs no modification once served. Availability, Mean-time for system failure, and profits are analyzed by utilizing the Regenerative point graphical technique and semi-Markov process. Result: Study reveals that the Mean-time for system failure of the system model go on decreasing as failure rate increase and availability goes on decreasing as failure-rate increase. Moreover, the study shows that the systems profit goes down on increase of Failure-rate. Conclusion: Findings of the study supports the hypothesis that the limits of failure/repair/inspection rate will surely have effective profitability. Moreover, it is found that the utility of scale of operation can easily be derived. The practical importance of biomass briquettes for burning coal or wood is very well appreciated.

Sign in / Sign up

Export Citation Format

Share Document