scholarly journals Using thermal power plants waste for building materials

Author(s):  
R S Feduik ◽  
A K Smoliakov ◽  
R A Timokhin ◽  
V O Batarshin ◽  
Yu G Yevdokimova
1999 ◽  
Vol 09 (03n04) ◽  
pp. 417-422 ◽  
Author(s):  
V. VIJAYAN ◽  
S. N. BEHERA

Fly ash is a major component of solid material generated by the coal-fired thermal power plants. In India the total amount of fly ash produced per annum is around 100 million tonnes. Fly ash has a great potential for utilization in making industrial products such as cement, bricks as well as building materials, besides being used as a soil conditioner and a provider of micro nutrients in agriculture. However, given the large amount of fly ash that accumulate at thermal power plants, their possible reuse and dispersion and mobilization into the environment of the various elements depend on climate, soils, indigenous vegetation and agriculture practices. Fly ash use in agriculture improved various physico-chemical properties of soil, particularly the water holding capacity, porosity and available plant nutrients. However it is generally apprehended that the application of large quantity of fly ash in fields may affect the plant growth and soil texture. Hence there is a need to characterize trace elements of fly ash. The results of trace element analysis of fly ash and pond ash samples collected from major thermal power plants of India by Particle Induced X-ray Emission (PIXE) have been discussed.


2020 ◽  
Vol 1011 ◽  
pp. 109-115
Author(s):  
Inna Maltseva ◽  
Svetlana Kurilova ◽  
Alexey Naumov

One of the effective ways to solve the environmental problems of the region at present is the waste disposal from Novocherkasskaya TPP, one of the largest sources of environmental pollution. The solution to this problem is associated with the integrated use of ash and slag mixtures components in the effective building materials’ production. On the TPP waste basis, the authors obtained structural and heat-insulating concrete with enhanced physical, mechanical and operational characteristics.


2013 ◽  
Vol 807-809 ◽  
pp. 1388-1396
Author(s):  
Wen Yong Wang ◽  
Bo Jun Ke ◽  
Gao Ping Fu

Based on a detailed survey on the source and volume of SO2 emission over Chengdu economic circle, the third-generation air quality model CMAQ is adopted for simulating the concentration of SO2 in the air over Chengdu Economic Circle. The results show that the hourly average concentration, daily average concentration and annual average concentration of SO2 in air exceed the limit of national standard, and the affected areas respectively account for 0.12%, 0.18% and 0.03% of the total area of the economic circle. Meanwhile, according to the result of calculation, the SO2 emissions of thermal power plants, chemical industry, building materials plants and industrial area sources make the largest contribution to the SO2 concentration in the air, with ratios of 36.15%, 18.67%, 11.81% and 8.34% respectively. thus,main measures to reduce emissions of SO2 in Chengdu economic circle are proposed as follows: focusing on the control of the emissions of SO2 from industrial enterprises, especially in the thermal power plants, chemical industry, building materials plants as well as industrial boilers; joint prevention and control measures should be implemented between the cities, so as to reduce the interaction caused dy emissions of SO2. With the application of the above measures, the total SO2 emissions can be reduced by 50% and the concentration of SO2 in the air can meet with the Class II of national ambient air quality Standard.


Technobius ◽  
2021 ◽  
Vol 1 (3) ◽  
pp. 0003
Author(s):  
Aliya Aldungarova ◽  
Kapar Aryngazin ◽  
Vladimir Larichkin ◽  
Assem Abisheva ◽  
Kamilla Alibekova

The paper describes the technology of manufacturing a construction product by vibrocompression using ash and slag waste from thermal power plants in the Pavlodar region. The task of the experimental research was to obtain a hollow wall stone based on ash and slag waste with a strength grade that is not inferior to products made according to the traditional recipe. The obtained samples with different ratios of components in the mixture were investigated for compressive strength, moisture absorption, frost resistance. It has been established that when ash and slag waste are added to the composition of the concrete mixture in an amount of up to 35 % of the mass of dry components, the strength characteristics of the hollow wall stone correspond to the selected brand


2015 ◽  
Vol 3 (1) ◽  
pp. 53-56
Author(s):  
Кирил Безгласный ◽  
Kiril Bezglasnyy ◽  
Роман Скориков ◽  
Roman Skorikov ◽  
Артем Шаля ◽  
...  

This article shows the obstacles of using thermal power plant’s ash waste on an industrial scale. The results of determining the activity of fly ash and hydroremoval ash in a mixture with Portland cement are given. Schemes of translation ash from the category of waste with heterogeneous characteristics in the raw material with stable properties are offered. The most rational ways of using ash from thermal power plants in building materials are presented


Sign in / Sign up

Export Citation Format

Share Document