scholarly journals CONTRADICTION ASH-AND-SLAG OF TPP

2015 ◽  
Vol 3 (1) ◽  
pp. 53-56
Author(s):  
Кирил Безгласный ◽  
Kiril Bezglasnyy ◽  
Роман Скориков ◽  
Roman Skorikov ◽  
Артем Шаля ◽  
...  
Keyword(s):  
Fly Ash ◽  
Portland Cement ◽  
Power Plants ◽  
Building Materials ◽  
Thermal Power ◽  
Raw Material ◽  
Industrial Scale ◽  
Thermal Power Plants

This article shows the obstacles of using thermal power plant’s ash waste on an industrial scale. The results of determining the activity of fly ash and hydroremoval ash in a mixture with Portland cement are given. Schemes of translation ash from the category of waste with heterogeneous characteristics in the raw material with stable properties are offered. The most rational ways of using ash from thermal power plants in building materials are presented

scholarly journals Investigation of fly ash properties with purpose of its utilization as a secondary raw material for portland cement clinker production

2006 ◽  
Vol 60 (9-10) ◽  
pp. 245-252 ◽  
Author(s):  
Zvezdana Bascarevic ◽  
Miroslav Komljenovic ◽  
Ljiljana Petrasinovic-Stojkanovic ◽  
Natasa Jovanovic ◽  
Aleksandra Rosic ◽  
...  
Keyword(s):  
Fly Ash ◽  
Portland Cement ◽  
Power Plants ◽  
Building Materials ◽  
Thermal Power ◽  
Cement Industry ◽  
Raw Material ◽  
Cement Clinker ◽  
Physical Chemical ◽  
Portland Cement Clinker

In this paper the results of the investigated properties of fly ash from four thermal power plants in Serbia are presented. The physical, chemical, mineralogical and thermal characterization of fly ash was carried out, in order to determine the possibility to utilize this material in the building materials industry, foremost in the cement industry. It was determined that, although there are differences concerning the physical, chemical, and mineralogical characteristics of the investigated samples, they are very similar concerning their thermal characteristics. It was concluded that using fly ash as one of the raw components in the mixture for Portland cement clinker synthesis, not only enables the substitution of natural resources, but it might have a positive effect on the lowering of the sintering temperature.

TRACE ELEMENT ANALYSIS OF FLY ASH BY PIXE

1999 ◽  
Vol 09 (03n04) ◽  
pp. 417-422 ◽  
Author(s):  
V. VIJAYAN ◽  
S. N. BEHERA
Keyword(s):  
Fly Ash ◽  
Trace Element ◽  
Power Plants ◽  
Building Materials ◽  
Thermal Power ◽  
Trace Element Analysis ◽  
Chemical Properties ◽  
Solid Material ◽  
Thermal Power Plants ◽  
Element Analysis

Fly ash is a major component of solid material generated by the coal-fired thermal power plants. In India the total amount of fly ash produced per annum is around 100 million tonnes. Fly ash has a great potential for utilization in making industrial products such as cement, bricks as well as building materials, besides being used as a soil conditioner and a provider of micro nutrients in agriculture. However, given the large amount of fly ash that accumulate at thermal power plants, their possible reuse and dispersion and mobilization into the environment of the various elements depend on climate, soils, indigenous vegetation and agriculture practices. Fly ash use in agriculture improved various physico-chemical properties of soil, particularly the water holding capacity, porosity and available plant nutrients. However it is generally apprehended that the application of large quantity of fly ash in fields may affect the plant growth and soil texture. Hence there is a need to characterize trace elements of fly ash. The results of trace element analysis of fly ash and pond ash samples collected from major thermal power plants of India by Particle Induced X-ray Emission (PIXE) have been discussed.

scholarly journals Fly Ash-Based Geopolymer Binder: A Future Construction Material

Minerals ◽  
2018 ◽  
Vol 8 (7) ◽  
pp. 299 ◽  
Author(s):  
Nakshatra Singh
Keyword(s):  
Fly Ash ◽  
Coming Out ◽  
Power Plants ◽  
Construction Material ◽  
Thermal Power ◽  
Raw Material ◽  
Thermal Power Plants ◽  
Portland Cement Concrete ◽  
Waste Production ◽  
Alternative Material

A large amount of waste coming out from industries has posed a great challenge in its disposal and effect on the environment. Particularly fly ash, coming out from thermal power plants, which contains aluminosilicate minerals and creates a lot of environmental problems. In recent years, it has been found that geopolymer may give solutions to waste problems and environmental issues. Geopolymer is an inorganic polymer first introduced by Davidovits. Geopolymer concrete can be considered as an innovative and alternative material to traditional Portland cement concrete. Use of fly ash as a raw material minimizes the waste production of thermal power plants and protects the environment. Geopolymer concretes have high early strength and resistant to an aggressive atmosphere. Methods of preparation and characterization of fly ash-based geopolymers have been presented in this paper. The properties of geopolymer cement/mortar/concrete under different conditions have been highlighted. Fire resistance properties and 3D printing technology have also been discussed.

Recycling of Fly Ash as an Energy Efficient Building Material: A Sustainable Approach

2016 ◽  
Vol 692 ◽  
pp. 54-65
Author(s):  
Mohammad Arif Kamal
Keyword(s):  
Fly Ash ◽  
Building Material ◽  
Power Plants ◽  
Building Materials ◽  
Construction Material ◽  
Thermal Power ◽  
Raw Material ◽  
Geopolymer Concrete ◽  
Promising Alternative ◽  
Resource Material

Fly Ash, known for its proven stability for variety of applications as admixture in cement, concrete, mortar, lime pozzolan mixture (bricks. blocks) etc, is an industrial by-product from Thermal Power Plants with current annual generation of approximately 108 million tones. Fly Ash is not just environment friendly, but is known for its cost effectiveness as well. Its use as a building material helps increase buildings strength and stability. Fly Ash is believed to be a very promising alternative for the industry seeking to meet its development objectives. Fly Ash is being very effectively and economically used in building components such as bricks, doors, door-frames, etc. Fly Ash is also being used in construction of roads and embankments with some design changes. It is also used as raw material in agricultural and wasteland development programmes. The trend is clear, Fly Ash will soon be considered as a resource material and its potential will be fully exploited. Through development & application of technologies, Fly Ash has shifted from “Waste Material” category to “Resource Material” category. The purpose of this paper is to provide an overview of disposal and utilization of Fly Ash and its beneficial potential in application of civil engineering construction as well as others. The focus of this paper is to explore the properties of fly ash as building materials and also aims at the properties of geopolymer concrete, how these distinguish from general characteristics of ordinary Portland cement. It also lay emphasize on durability, properties of fly ash based geopolymer concrete and its advantage when used as a construction material as well.

The Latest Research in Mongolia on the Utilization of Coal Combustion By-Products

2021 ◽  
Vol 323 ◽  
pp. 8-13
Author(s):  
Jadambaa Temuujin ◽  
Damdinsuren Munkhtuvshin ◽  
Claus H. Ruescher
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Coal Combustion ◽  
Power Plants ◽  
Thermal Power ◽  
Thermal Power Plants ◽  
Power Stations ◽  
Thermal Power Stations ◽  
Coal Ashes ◽  
By Products

With a geological reserve of over 170 billion tons, coal is the most abundant energy source in Mongolia with six operating thermal power stations. Moreover, in Ulaanbaatar city over 210000 families live in the Ger district and use over 800000 tons of coal as a fuel. The three thermal power plants in Ulaanbaatar burn about 5 million tons of coal, resulting in more than 500000 tons of coal combustion by-products per year. Globally, the ashes produced by thermal power plants, boilers, and single ovens pose serious environmental problems. The utilization of various types of waste is one of the factors determining the sustainability of cities. Therefore, the processing of wastes for re-use or disposal is a critical topic in waste management and materials research. According to research, the Mongolian capital city's air and soil quality has reached a disastrous level. The main reasons for air pollution in Ulaanbaatar are reported as being coal-fired stoves of the Ger residential district, thermal power stations, small and medium-sized low-pressure furnaces, and motor vehicles. Previously, coal ashes have been used to prepare advanced materials such as glass-ceramics with the hardness of 6.35 GPa, geopolymer concrete with compressive strength of over 30 MPa and zeolite A with a Cr (III) removal capacity of 35.8 mg/g. Here we discuss our latest results on the utilization of fly ash for preparation of a cement stabilized base layer for paved roads, mechanically activated fly ash for use in concrete production, and coal ash from the Ger district for preparation of an adsorbent. An addition of 20% fly ash to 5-8% cement made from a mixture of road base gave a compressive strength of ~ 4MPa, which exceeds the standard. Using coal ashes from Ger district prepared a new type of adsorbent material capable of removing various organic pollutants from tannery water was developed. This ash also showed weak leaching characteristics in water and acidic environment, which opens up an excellent opportunity to utilize.

RESEARCH OF COMPLEX MODIFICATION OF HEAVY CONCRETE

2021 ◽  
Vol 96 (4) ◽  
pp. 107-112
Author(s):  
YU.S. FILIMONOVA ◽  
◽  
E.G. VELICHKO ◽  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Power Plants ◽  
High Efficiency ◽  
Thermal Power ◽  
Thermal Power Plants ◽  
Complex Chemical ◽  
Composition And Structure ◽  
Combined Use ◽  
Mineral Additive

Modification of the composition and structure of heavy concrete with the use of a complex chemical-mineral additive consisting of fly ash from thermal power plants, a superplasticizer, a high-valence hardening accelerator AC and a fine-dispersed clinker component is considered. Modified concrete is characterized by an increase in compressive strength at a brand age by 67%, a decrease in the water content of a concrete mixture by 13.6% and an improvement in its workability by 11-12 cm. With the combined use of a superplasticizer and a high-valence hardening accelerator AC a significant synergistic effect is observed in the format of enhancing their plasticizing effect. The high efficiency of the application of the mixed-dispersed clinker component has been established.

Supplier Selection Criterion for SSCM in Indian Thermal Power Plant

2019 ◽  
pp. 240-257
Author(s):  
Suchismita Satapathy
Keyword(s):  
Power Plant ◽  
Thermal Power Plant ◽  
Power Plants ◽  
Thermal Power ◽  
Selection Criterion ◽  
Raw Material ◽  
Thermal Power Plants ◽  
Whole Process ◽  
Main Motive

All companies are dependent on their raw material providers. The same applies in the case of thermal power plants. The major raw material for a thermal power plant is the coal. There are a lot of companies which in turn provide this coal to the thermal power plant. Some of these companies are international; some are local, whereas the others are localized. The thermal power plants look into all the aspects of the coal providing company, before settling down for a deal. Some people are specifically assigned to the task of managing the supply chain. The main motive is to optimize the whole process and achieve higher efficiency. There are a lot of things which a thermal power plant looks into before finalizing a deal, such as the price, quality of goods, etc. Thus, it is very important for the raw material providers to understand each and every aspect of the demands of the thermal power plant. A combination of three methods—Delphi, SWARA, and modified SWARA—has been applied to a list of factors, which has later been ranked according to the weight and other relevant calculations.

Sign in / Sign up

Export Citation Format

Share Document