Adsorption evaluation of large-size HDEHP/SiO2-P adsorbent investigated by micro-PIXE analysis

The Zr and Mo removal from HLLW is the current issue for repeated usage of the CMPO/SiO2-P-packed column. The adsorbability of the 2-mm-sized HDEHP/SiO2-P adsorbent, which was prepared by fabricating a SiO2 particle from the vibration cutting method and adapting a new polymerization method, was evaluated by the batch-wise adsorption experiment. In spite of the impregnation ratio of the HDEHP extractant, the extraction of Zr and Mo ions from the simulated HLLW was achieved but lanthanide ions e.g., Nd and Gd were also extracted as a minor component. Such unusual adsorption behavior of lanthanide ions could be only provided by accurate, sensitive and reliable micro-PIXE analysis.

Development of a 20MeV proton particle-induced X-ray emission analysis method in a helium atmosphere

We developed a 20[Formula: see text]MeV particle-induced X-ray emission (PIXE) analysis method using a medical cyclotron, which is conventionally used for positron emission tomography analysis performed in vacuo, during which the target sample is damaged. For non-destructive analysis and ease of switching between target samples, we developed a technique allowing 20[Formula: see text]MeV proton PIXE analysis to be performed at the atmospheric pressure. We filled the PIXE analysis chamber with helium and checked that the continuous background of the Compton tails of nuclear reaction [Formula: see text]-rays increased only minimally, and that the quasi-free electron bremsstrahlung (QFEB) did not increase at all, in the X-ray energy spectrum.

Long-term and season-specific changes in the body concentrations of iron, copper, zinc, and selenium by means of quantitative analyses of beard samples collected every day — a case study

A total of 4269 beard samples were collected from the same person every day over a 12-year period and analyzed by PIXE using a standard-free method. It was found that the concentrations of copper and zinc showed certain short-term changes but did not show a noticeable long-term trend over the study period, with only iron showing a slightly decreasing tendency with age. All of these elements showed clear yearly variations with a cycle of a few years possibly due to periodic metabolic changes in the subject’s body or long-term changes in eating habits. In contrast, however, selenium showed clear seasonal variations. Its concentration significantly increased in the summer and decreased in the winter, just as was observed with arsenic and mercury. This suggests that most of the subject’s selenium intake was from marine products, whose supply and consumption were increased in the summer. These findings confirmed that beard analyses are useful not only for evaluating essential-element intake but also for estimating the relationship between the body-element concentrations and ingestion of certain foods.

Analysis on adsorbent for spent solvent treatment by micro-PIXE and EXAFS

The spent PUREX solvent containing U and Pu is generated from the reprocessing process of spent nuclear fuel. The nuclear material removal is important for the safe storage or disposal of the spent solvent. Our previous study revealed that the adsorbent with the iminodiacetic acid (IDA) functional group is one of the most promising materials for designing the nuclear material recovery process. Accordingly, an IDA-type adsorbent was synthesized by using graft polymerization technology or a chemical reaction to improve the adsorption rate and capacity. The synthesized IDA-type adsorbent was characterized by micro particle-induced X-ray emission (PIXE) and extended X-ray absorption fine structure (EXAFS) analyses. The micro-PIXE analysis revealed that Zr was adsorbed on the whole synthesized adsorbents and quantified the microamount of adsorbed Zr. Moreover, EXAFS suggested that Zr in the aqueous solution and solvent can be trapped by the IDA group with different mechanisms.

Elemental analysis of particles emitted from aircraft using in-vacuum PIXE

To comprehend the elemental characterization of the particles emitted from an aircraft, we performed element analysis using in-vacuum PIXE for particles emitted from the carbon disc brakes and tires in addition to the exhaust particles produced by the jet engine. As for the elemental characteristics of aircraft source particulate matter, engine reversers mainly consisted of Al, Si, Ca, and Fe, and also included Ti, Cr, Mo, and W. The disc brakes mainly contained Si, Ca, and Fe, and also contained S, K, Ti, Cr, Ni, and Cu. In tires, Na, Al, Si, Ca, Fe, and Zn were mainly found, and S, K, and Ti were also detected. Thus, there was a difference in the trace elements found in the aircraft source particulate matter. These results aid in determining the component features of particles emitted from an aircraft.

Comparison of trace elements in freshwater pearls cultured in Japan, China, and USA

In this paper, we performed PIXE analysis of trace elements in freshwater pearls cultured in four different areas: Lake Biwa (Japan), Lake Kasumigaura (Japan), an unidentified lake in China, and Kentucky Lake (USA). We investigated the difference of trace elements contained in the four pearls from different aquaculture environments. The observed trace elements are Mn, Fe, Cu, Zn, and Sr. The major trace elements are Mn, Sr for all the samples. From comparison of the proportions of elements contained, we found the following features: (1) The Kasumigaura pearl has a nucleus with a high Mn/Sr ratio, (2) The Biwako pearl is low in iron content, and (3) The American pearl has high in Fe/Sr, Cu/Sr, and Zn/Sr ratios.

FT-IR measurement on the damage of Japanese paper induced by PIXE analysis

Analysis of cultural heritage samples by PIXE involves the risk of damaging precious samples due to MeV-proton irradiation. To investigate appropriate methods to detect invisible damage due to PIXE analysis, we analyzed the change in chemical bonding of the sample surface subjected to PIXE and RBS measurement by Fourier Transform InfraRed spectroscopy (FT-IR). We used Japanese hemp paper as a simulated cultural property sample. The proton irradiation for the PIXE/RBS measurement was performed in a vacuum with an incident beam energy of 2.5 MeV, a beam current of 1 nA, and an irradiation time up to 10 min. The corresponding beam flux and fluence were 0.06 nA/mm2 and 4 [Formula: see text]Coulomb/cm2, respectively. When the irradiation time was 10 min, the absorbed dose was 480 kGy on the sample surface. We identified neither change of elemental composition nor visible change such as discoloration due to irradiation. However, we found changes in peak heights in the measured FT-IR spectra, which suggest the destruction of chemical bonds such as O–H and C–O due to proton-induced radiation damage.

Analysis of tooth-bound fluoride after the application of coating materials on the enamel surface with an in-air micro PIXE/PIGE

Tooth-bound (KOH-insoluble) fluoride prevents caries via long retention within the tooth structure. Tooth-bound fluoride in the enamel was investigated after applying various fluoride-containing tooth-coating materials using an in-air micro [Formula: see text] PIXE/PIGE system. Three different fluoride-containing or a non-fluoride containing coating materials were applied to the coronal enamel surface of 24 extracted human molars. The samples were stored in water for 1 or 7 days and then sectioned into two slices. One slice was immersed in 1M KOH solution for 24 h for KOH-insoluble fluoride (KOH(T)) analysis. The second slice was not subjected to KOH treatment and was used to analyze the whole fluoride (KOH-soluble plus insoluble fluoride: KOH(U)). Fluorine and calcium distribution were measured in all the slices with [Formula: see text]PIXE/PIGE. KOH(U) was higher than KOH(T) on some materials, especially those that released more fluoride. For KOH(T), there was no significant difference among all fluoride-containing materials in the 7-day group. However, there were significant differences in the KOH(U) samples during the same period. PIXE/PIGE analysis confirmed the presence of tooth-bound fluoride in the enamel adjacent to the fluoride-containing coating materials. The amount of tooth-bound fluoride depended on the type of material.

Quantification of major and trace elements contained in aircraft JET A-1 fuel by in-vacuum PIXE analysis

To characterize the chemical composition of aircraft exhaust particles, we developed a treatment method of jet fuel for an elemental analysis by an in-vacuum PIXE system. Eleven elements (Si, S, Cl, K, Ca, Cr, Fe, Ni, Cu, Zn, and Pb) were identified from each sample. The concentrations of S from five JET A-1 fuel samples collected on different days ranged from 30.4 to 440 wt.-ppm. The concentration level of S agreed well with the measurement results obtained by an in-air PIXE analysis, which we have previously performed to determine the major content elements and their concentration levels. Nine elements out of the identified 11 elements (Si, Cl, K, Ca, Cr, Ni, Cu, Zn, and Pb), which were not detected by the in-air PIXE analysis, were detected in all the JET A-1 fuel samples measured. Among these elements, Si, Ni, Cu, Zn, and Pb were found to be the major components. It is suggested that particles emitted from aircraft jet engines, which are generally in the size range smaller than 100 nm (ultrafine particles: UFPs), may contain Si, Ni, Cu, Zn, and Pb. These findings provide useful insights into the source apportionment of UFPs in and around airports.