The paper presents problems related to the load-bearing capacity analysis of the building partitions of the cold storage facility. The subject of the case study are two different buildings built in the early fifties of the last century. Despite the similar cubature and the construction period, the structures of these buildings are different. The analysed cold store in Warsaw (Poland) is a steel and brick structure, while the second example concerns a reinforced concrete slab-pillar structure located in Wloclawek (Poland). In both cases, the issue related to the assessment of the current technical condition of the structural elements, including the safety of the load-bearing structure and the safety of its use was considered. Moreover, the permissible load for inter-storey slabs in both cases was determined. In order to properly determine the current load-bearing capacity of inter-story slabs, the archival technical and operational documentation of buildings was firstly analysed. Their technical condition was also taken into account in the assessment process. In-situ inspections of both buildings had been carried out. This allowed the determination of the scope of necessary tests and the selection of test and check points for each structural element. Such actions allowed to identify cross-sections of the structural elements and the parameters of built-in materials. The performed diagnostics also allowed to properly determine the technical condition of each structural element, the degree of degradation of the structure and to correctly determine its current load-bearing capacity while simultaneously satisfying both limit states - the Ultimate Limit State (ULS) and the Serviceability Limit State (SLS).
Dynamic load-bearing capacity analysis for the main Transmission Mechanism of Traction Machine in a Cargo Lift
