scholarly journals Brief Discussion on Evaluation & Demonstration of Operating Reliability of Safety-level I&C System Equipment in Nuclear Power Plant

2021 ◽  
Vol 1043 (5) ◽  
pp. 052028
Author(s):  
Guixia Zhu ◽  
Yugang Qian ◽  
Jian Lan ◽  
Diliang Li ◽  
Tianmi Zhou ◽  
...  
2013 ◽  
Vol 421 ◽  
pp. 181-185
Author(s):  
Yan Li Qi ◽  
Yuan Xue ◽  
Tian Tian ◽  
Xing Jiang Chen ◽  
Xi Quan Fang

As the key equipment to ensure the stable operation of containment spray system in nuclear power plant, a RCC-M ejector with safe and credible performance is very important to make sure the containment integrality under lose of coolant accident (LOCA) or pipe broken. However, it was purchased from overseas supplier all along because of its special configuration, nonstandard design, severe safety level and small quantity demand. To implement equipment localization, and referring to practical applications of some nuclear plants, a RCC-M ejector is independently manufactured and tested, all performance could meet the requirement according to the test result. The RCC-M ejector is authenticated by experts by China Nuclear Energy Association, and the localization prototype research of this paper has great application and popularization value.


2021 ◽  
Vol 50 (2) ◽  
pp. 525-536
Author(s):  
Aisyah Aisyah ◽  
Mirawaty Mirawaty ◽  
Dwi Luhur Ibnu Saputra ◽  
Risdiyana Setiawan ◽  
Pungky Ayu Artian ◽  
...  

The back end of the utilization of nuclear technology is safety and management of spent fuel, which is a key element contributing to the success of the nuclear power plant program. Indonesia’s National Nuclear Energy Agency resolved to establish an experimental power reactor, called RDE, as a nuclear power plant demo. The fuel of this reactor is similar to that of German’s experimental pebble-bed reactor (PBR), Arbeitsgemeinschaft Versuchsreaktor(AVR). In this study, the spent fuel of AVR was studied to obtain the safety parameter data for storage of RDE spent fuel by varying the fission in the initial metallic atoms (%FIMA). These parameters that must be studied include the radioactivity, decay heat, proliferation threats of both 239Pu and 235U, and the presence of 137Cs, a dangerous fission product that can escape from damaged spent fuels. The calculation was conducted by ORIGEN 2.1. The result of the study demonstrates a higher %FIMA indicates a higher safety level that is required since the activity and decay heat of the spent fuel will increase and, as will be the total amounts of 239Pu and 137Cs. However, the 235U amount will decrease. For a 100 years storage of spent fuel, the optimum %FIMA is 8.2 with a canister capacity of 1,900 pebbles. Further, the activity and decay heat of the spent nuclear fuel are 2.013 × 1013 Bq and 6.065 W, respectively. The activities of 239Pu, 137Cs, and 235U are 5.187 ×1011, 7.100 × 1012, and 7.339 × 107 Bq, respectively.


Author(s):  
Z. P. Tilliette ◽  
B. Pierre ◽  
P. Jude ◽  
J. Chaboseau

The concept of a helium cycle nuclear power plant with a single turbomachine located outside the P.C.R.V. in a leaktight basement is being studied. Main features of the system are pointed out, as are the favorable aspects it offers for a satisfactory design of the plant, a high safety level, a good efficiency for electricity generation associated with a dry cooling tower and heat recovery in good conditions for heating or industrial purposes. Above all, the high technological credibility due to the temperature of 750 C is worth being emphasized. In this paper, a 750 C/800 MWe power plant (2000 MWt) with one intercooler is presented as an example of a possible first generation of gas turbine HTGR. Development prospects for higher power levels, 1000/2000 MWe, are also investigated, at first with one but also with two intermediate coolers, taking into consideration the somewhat higher-helium temperature. The net plant efficiencies, for electricity generation only, range from 40 to 45 percent.


Author(s):  
Liu Tao

Small module reactors (SMRs) are in ascendant in the world due to their shorter design & construction duration and higher safety level. Probabilistic safety assessment (PSA) will play an irreplaceable role in small module reactor design demonstration and other application stages. A mature PSA methodology framework is mature and has successfully used in commercial nuclear power plant application. While several issues are worthy of discussion when PSA performed for SMRs project. Based on traditional PSA framework and its fundamental elements, potential technical issues put forward for discussion for SMRs project PSA, which will provide references for the combination of PSA and SMRs project.


2021 ◽  
Vol 1043 (5) ◽  
pp. 052024
Author(s):  
Huanyu Wang ◽  
Guixia Zhu ◽  
Xiaolei Teng ◽  
Xin’an Sun ◽  
Yugang Qian ◽  
...  

2020 ◽  
Vol 39 (5) ◽  
pp. 6339-6350
Author(s):  
Esra Çakır ◽  
Ziya Ulukan

Due to the increase in energy demand, many countries suffer from energy poverty because of insufficient and expensive energy supply. Plans to use alternative power like nuclear power for electricity generation are being revived among developing countries. Decisions for installation of power plants need to be based on careful assessment of future energy supply and demand, economic and financial implications and requirements for technology transfer. Since the problem involves many vague parameters, a fuzzy model should be an appropriate approach for dealing with this problem. This study develops a Fuzzy Multi-Objective Linear Programming (FMOLP) model for solving the nuclear power plant installation problem in fuzzy environment. FMOLP approach is recommended for cases where the objective functions are imprecise and can only be stated within a certain threshold level. The proposed model attempts to minimize total duration time, total cost and maximize the total crash time of the installation project. By using FMOLP, the weighted additive technique can also be applied in order to transform the model into Fuzzy Multiple Weighted-Objective Linear Programming (FMWOLP) to control the objective values such that all decision makers target on each criterion can be met. The optimum solution with the achievement level for both of the models (FMOLP and FMWOLP) are compared with each other. FMWOLP results in better performance as the overall degree of satisfaction depends on the weight given to the objective functions. A numerical example demonstrates the feasibility of applying the proposed models to nuclear power plant installation problem.


Sign in / Sign up

Export Citation Format

Share Document