The vibration signal of an on-load tap changer (OLTC) consists of a series of sharp vibration bursts, and its fault feature in certain periods is easily missed. This study considered that preprocessing the vibration signal of the OLTC in segments could effectively solve the aforementioned problem. First, the collection of the signal is discussed, the waveform characteristics of the vibration signal when the OLTC was in normal action was described, and the selection of the signal was analyzed. Second, the time domain characteristics and frequency spectrum analyses were carried out to demonstrate the necessity of segmented preprocessing. Further, the segmented preprocessing method for the vibration signal of the OLTC was presented. Finally, the main mechanical faults of the OLTC were simulated, and the vibration signals were collected to carry out the fault diagnosis experiment on the OLTC. The experimental results showed that the accuracy of the fault diagnosis increased from 94.30% of the nonsegmented preprocessing to 98.46% of the segmented preprocessing. The increase was greater, especially for contact wear faults. The method was successfully applied to the actual project.
Fault Diagnosis of On-load Tap-changer Based on Vibration Signal
