scholarly journals Vesicle Docking to the Spindle Pole Body Is Necessary to Recruit the Exocyst During Membrane Formation inSaccharomyces cerevisiae

2010 ◽  
Vol 21 (21) ◽  
pp. 3693-3707 ◽  
Author(s):  
Erin M. Mathieson ◽  
Yasuyuki Suda ◽  
Mark Nickas ◽  
Brian Snydsman ◽  
Trisha N. Davis ◽  
...  
Keyword(s):  
De Novo ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Resonance Energy ◽  
Initiation Site ◽  
Spindle Pole ◽  
Rab Gtpase ◽  
Membrane Formation ◽  
Vesicle Docking ◽  
Pole Body

During meiosis II in Saccharomyces cerevisiae, the cytoplasmic face of the spindle pole body, referred to as the meiosis II outer plaque (MOP), is modified in both composition and structure to become the initiation site for de novo formation of a membrane called the prospore membrane. The MOP serves as a docking complex for precursor vesicles that are targeted to its surface. Using fluorescence resonance energy transfer analysis, the orientation of coiled-coil proteins within the MOP has been determined. The N-termini of two proteins, Mpc54p and Spo21p, were oriented toward the outer surface of the structure. Mutations in the N-terminus of Mpc54p resulted in a unique phenotype: precursor vesicles loosely tethered to the MOP but did not contact its surface. Thus, these mpc54 mutants separate the steps of vesicle association and docking. Using these mpc54 mutants, we determined that recruitment of the Rab GTPase Sec4p, as well as the exocyst components Sec3p and Sec8p, to the precursor vesicles requires vesicle docking to the MOP. This suggests that the MOP promotes membrane formation both by localization of precursor vesicles to a particular site and by recruitment of a second tethering complex, the exocyst, that stimulates downstream events of fusion.

S. pombe sporulation-specific coiled-coil protein Spo15p is localized to the spindle pole body and essential for its modification

2000 ◽  
Vol 113 (3) ◽  
pp. 545-554 ◽  
Author(s):  
S. Ikemoto ◽  
T. Nakamura ◽  
M. Kubo ◽  
C. Shimoda
Keyword(s):  
Life Cycle ◽  
Fusion Gene ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Wild Type ◽  
Membrane Formation ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Meiotic Spindles

Spindle pole bodies in the fission yeast Schizosaccharomyces pombe are required during meiosis, not only for spindle formation but also for the assembly of forespore membranes. The spo15 mutant is defective in the formation of forespore membranes, which develop into spore envelopes. The spo15(+)gene encodes a protein with a predicted molecular mass of 223 kDa, containing potential coiled-coil regions. The spo15 gene disruptant was not lethal, but was defective in spore formation. Northern and western analyses indicated that spo15(+) was expressed not only in meiotic cells but also in vegetative cells. When the spo15-GFP fusion gene was expressed by the authentic spo15 promoter during vegetative growth and sporulation, the fusion protein colocalized with Sad1p, which is a component of spindle pole bodies. Meiotic divisions proceeded in spo15delta cells with kinetics similar to those in wild-type cells. In addition, the morphology of the mitotic and meiotic spindles and the nuclear segregation were normal in spo15delta. Intriguingly, transformation of spindle pole bodies from a punctate to a crescent form prior to forespore membrane formation was not observed in spo15delta cells. We conclude that Spo15p is associated with spindle pole bodies throughout the life cycle and plays an indispensable role in the initiation of spore membrane formation.

scholarly journals The molecular architecture of the yeast spindle pole body core determined by Bayesian integrative modeling

2017 ◽  
Vol 28 (23) ◽  
pp. 3298-3314 ◽  
Author(s):  
Shruthi Viswanath ◽  
Massimiliano Bonomi ◽  
Seung Joong Kim ◽  
Vadim A. Klenchin ◽  
Keenan C. Taylor ◽  
...  
Keyword(s):  
Cell Biology ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Resonance Energy ◽  
Spindle Pole ◽  
Physical Structure ◽  
Molecular Architecture ◽  
X Ray ◽  
Pole Body

Microtubule-organizing centers (MTOCs) form, anchor, and stabilize the polarized network of microtubules in a cell. The central MTOC is the centrosome that duplicates during the cell cycle and assembles a bipolar spindle during mitosis to capture and segregate sister chromatids. Yet, despite their importance in cell biology, the physical structure of MTOCs is poorly understood. Here we determine the molecular architecture of the core of the yeast spindle pole body (SPB) by Bayesian integrative structure modeling based on in vivo fluorescence resonance energy transfer (FRET), small-angle x-ray scattering (SAXS), x-ray crystallography, electron microscopy, and two-hybrid analysis. The model is validated by several methods that include a genetic analysis of the conserved PACT domain that recruits Spc110, a protein related to pericentrin, to the SPB. The model suggests that calmodulin can act as a protein cross-linker and Spc29 is an extended, flexible protein. The model led to the identification of a single, essential heptad in the coiled-coil of Spc110 and a minimal PACT domain. It also led to a proposed pathway for the integration of Spc110 into the SPB.

scholarly journals Ady4p and Spo74p Are Components of the Meiotic Spindle Pole Body That Promote Growth of the Prospore Membrane in Saccharomyces cerevisiae

2003 ◽  
Vol 2 (3) ◽  
pp. 431-445 ◽  
Author(s):  
Mark E. Nickas ◽  
Cindi Schwartz ◽  
Aaron M. Neiman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
De Novo ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Meiotic Spindle ◽  
Membrane Formation ◽  
Auxiliary Component ◽  
Pole Body ◽  
Prospore Membrane ◽  
Organizing Center

ABSTRACT Spore formation in Saccharomyces cerevisiae occurs via the de novo synthesis of the prospore membrane during the second meiotic division. Prospore membrane formation is triggered by assembly of a membrane-organizing center, the meiotic outer plaque (MOP), on the cytoplasmic face of the spindle pole body (SPB) during meiosis. We report here the identification of two new components of the MOP, Ady4p and Spo74p. Ady4p and Spo74p interact with known proteins of the MOP and are localized to the outer plaque of the SPB during meiosis II. MOP assembly and prospore membrane formation are abolished in spo74Δ/spo74Δ cells and occur aberrantly in ady4Δ/ady4Δ cells. Spo74p and the MOP component Mpc70p are mutually dependent for recruitment to SPBs during meiosis. In contrast, both Ady4p and Spo74p are present at SPBs, albeit at reduced levels, in cells that lack the MOP component Mpc54p. Our findings suggest a model for the assembled MOP in which Mpc54p, Mpc70p, and Spo74p make up a core structural unit of the scaffold that initiates synthesis of the prospore membrane, and Ady4p is an auxiliary component that stabilizes the plaque.

scholarly journals Meiotic Spindle Pole Bodies Acquire the Ability to Assemble the Spore Plasma Membrane by Sequential Recruitment of Sporulation-specific Components in Fission Yeast

2008 ◽  
Vol 19 (6) ◽  
pp. 2476-2487 ◽  
Author(s):  
Yukiko Nakase ◽  
Michiko Nakamura-Kubo ◽  
Yanfang Ye ◽  
Aiko Hirata ◽  
Chikashi Shimoda ◽  
...  
Keyword(s):  
De Novo ◽  
Close Contact ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Meiotic Spindle ◽  
Deletion Mutants ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Cytoplasmic Side

The spindle pole body (SPB) of Schizosaccharomyces pombe is required for assembly of the forespore membrane (FSM) during meiosis. Before de novo biogenesis of the FSM, the meiotic SPB forms outer plaques, an event referred to as SPB modification. A constitutive SPB component, Spo15, plays an indispensable role in SPB modification and sporulation. Here, we analyzed two sporulation-specific genes, spo13+ and spo2+, which are not required for progression of meiotic nuclear divisions, but are essential for sporulation. Spo13 is a 16-kDa coiled-coil protein, and Spo2 is a 15-kDa nonconserved protein. Both Spo13 and Spo2 specifically associated with the meiotic SPB. The respective deletion mutants are viable, but defective in SPB modification and in the onset of FSM formation. Spo13 and Spo2 localized on the cytoplasmic side of the SPB in close contact with the nascent FSM. Localization of Spo13 to the SPB was dependent on Spo15 and Spo2; that of Spo2 depended only on Spo15, suggesting that their recruitment to the SPB is strictly controlled. Spo2 physically associated with both Spo15 and Spo13, but Spo13 and Spo15 did not interact directly. Taken together, these observations indicate that Spo2 is recruited to the SPB during meiosis and then assists in the localization of Spo13 to the outer surface of the SPB.

scholarly journals SPO21Is Required for Meiosis-specific Modification of the Spindle Pole Body in Yeast

2001 ◽  
Vol 12 (6) ◽  
pp. 1611-1621 ◽  
Author(s):  
Bethany K. Bajgier ◽  
Maria Malzone ◽  
Mark Nickas ◽  
Aaron M. Neiman
Keyword(s):  
De Novo ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Functional Change ◽  
Direct Role ◽  
Yeast Saccharomyces Cerevisiae ◽  
Membrane Formation ◽  
Pole Body ◽  
Cytoplasmic Face ◽  
A Site

During meiosis II in the yeast Saccharomyces cerevisiae, the cytoplasmic face of the spindle pole body changes from a site of microtubule initiation to a site of de novo membrane formation. These membranes are required to package the haploid meiotic products into spores. This functional change in the spindle pole body involves the expansion and modification of its cytoplasmic face, termed the outer plaque. We report here that SPO21is required for this modification. The Spo21 protein localizes to the spindle pole in meiotic cells. In the absence of SPO21the structure of the outer plaque is abnormal, and prospore membranes do not form. Further, decreased dosage of SPO21 leaves only two of the four spindle pole bodies competent to generate membranes. Mutation of CNM67, encoding a known component of the mitotic outer plaque, also results in a meiotic outer plaque defect but does not block membrane formation, suggesting that Spo21p may play a direct role in initiating membrane formation.

Ady3p Links Spindle Pole Body Function to Spore Wall Synthesis in Saccharomyces cerevisiae

Genetics ◽  
2002 ◽  
Vol 160 (4) ◽  
pp. 1439-1450
Author(s):  
Mark E Nickas ◽  
Aaron M Neiman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
De Novo ◽  
Spindle Pole Body ◽  
Leading Edge ◽  
Spindle Pole ◽  
Spore Wall ◽  
Pole Body ◽  
Prospore Membrane ◽  
Sporulation Efficiency ◽  
Spore Walls

Abstract Spore formation in Saccharomyces cerevisiae requires the de novo synthesis of prospore membranes and spore walls. Ady3p has been identified as an interaction partner for Mpc70p/Spo21p, a meiosis-specific component of the outer plaque of the spindle pole body (SPB) that is required for prospore membrane formation, and for Don1p, which forms a ring-like structure at the leading edge of the prospore membrane during meiosis II. ADY3 expression has been shown to be induced in midsporulation. We report here that Ady3p interacts with additional components of the outer and central plaques of the SPB in the two-hybrid assay. Cells that lack ADY3 display a decrease in sporulation efficiency, and most ady3Δ/ady3Δ asci that do form contain fewer than four spores. The sporulation defect in ady3Δ/ady3Δ cells is due to a failure to synthesize spore wall polymers. Ady3p forms ring-like structures around meiosis II spindles that colocalize with those formed by Don1p, and Don1p rings are absent during meiosis II in ady3Δ/ady3Δ cells. In mpc70Δ/mpc70Δ cells, Ady3p remains associated with SPBs during meiosis II. Our results suggest that Ady3p mediates assembly of the Don1p-containing structure at the leading edge of the prospore membrane via interaction with components of the SPB and that this structure is involved in spore wall formation.

scholarly journals Analysis of a Spindle Pole Body Mutant Reveals a Defect in Biorientation and Illuminates Spindle Forces

2005 ◽  
Vol 16 (1) ◽  
pp. 141-152 ◽  
Author(s):  
Tennessee J. Yoder ◽  
Mark A. McElwain ◽  
Susan E. Francis ◽  
Joy Bagley ◽  
Eric G.D. Muller ◽  
...  
Keyword(s):  
Fluorescent Protein ◽  
Spindle Pole Body ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Spindle Pole ◽  
Microtubule Organizing Center ◽  
Bipolar Spindle ◽  
Pole Body ◽  
Cytoplasmic Microtubules ◽  
Mutant Cells

The spindle pole body (SPB) is the microtubule organizing center in Saccharomyces cerevisiae. An essential task of the SPB is to ensure assembly of the bipolar spindle, which requires a proper balancing of forces on the microtubules and chromosomes. The SPB component Spc110p connects the ends of the spindle microtubules to the core of the SPB. We previously reported the isolation of a mutant allele spc110-226 that causes broken spindles and SPB disintegration 30 min after spindle formation. By live cell imaging of mutant cells with green fluorescent protein (GFP)-Tub1p or Spc97p-GFP, we show that spc110-226 mutant cells have early defects in spindle assembly. Short spindles form but do not advance to the 1.5-μm stage and frequently collapse. Kinetochores are not arranged properly in the mutant cells. In 70% of the cells, no stable biorientation occurs and all kinetochores are associated with only one SPB. Examination of the SPB remnants by electron microscopy tomography and fluorescence microscopy revealed that the Spc110-226p/calmodulin complex is stripped off of the central plaque of the SPB and coalesces to from a nucleating structure in the nucleoplasm. The central plaque components Spc42p and Spc29p remain behind in the nuclear envelope. The delamination is likely due to a perturbed interaction between Spc42p and Spc110-226p as detected by fluorescence resonance energy transfer analysis. We suggest that the force exerted on the SPB by biorientation of the chromosomes pulls the Spc110-226p out of the SPB; removal of force exerted by coherence of the sister chromatids reduced fragmentation fourfold. Removal of the forces exerted by the cytoplasmic microtubules had no effect on fragmentation. Our results provide insights into the relative contributions of the kinetochore and cytoplasmic microtubules to the forces involved in formation of a bipolar spindle.

scholarly journals Nuf2, a spindle pole body-associated protein required for nuclear division in yeast.

1994 ◽  
Vol 125 (4) ◽  
pp. 853-866 ◽  
Author(s):  
M A Osborne ◽  
G Schlenstedt ◽  
T Jinks ◽  
P A Silver
Keyword(s):  
Nuclear Division ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Temperature Shift ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Yeast Saccharomyces Cerevisiae ◽  
Culture Cells ◽  
Pole Body ◽  
Associated Proteins

The NUF2 gene of the yeast Saccharomyces cerevisiae encodes an essential 53-kd protein with a high content of potential coiled-coil structure similar to myosin. Nuf2 is associated with the spindle pole body (SPB) as determined by coimmunofluorescence with known SPB proteins. Nuf2 appears to be localized to the intranuclear region and is a candidate for a protein involved in SPB separation. The nuclear association of Nuf2 can be disrupted, in part, by 1 M salt but not by the detergent Triton X-100. All Nuf2 can be removed from nuclei by 8 M urea extraction. In this regard, Nuf2 is similar to other SPB-associated proteins including Nufl/SPC110, also a coiled-coil protein. Temperature-sensitive alleles of NUF2 were generated within the coiled-coil region of Nuf2 and such NUF2 mutant cells rapidly arrest after temperature shift with a single undivided or partially divided nucleus in the bud neck, a shortened mitotic spindle and their DNA fully replicated. In sum, Nuf2 is a protein associated with the SPB that is critical for nuclear division. Anti-Nuf2 antibodies also recognize a mammalian 73-kd protein and display centrosome staining of mammalian tissue culture cells suggesting the presence of a protein with similar function.

Assembly and dynamics of an anastral:astral spindle: the meiosis II spindle of Drosophila oocytes

1998 ◽  
Vol 111 (17) ◽  
pp. 2487-2495 ◽  
Author(s):  
S.A. Endow ◽  
D.J. Komma
Keyword(s):  
De Novo ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
The Body ◽  
Central Spindle ◽  
Spindle Poles ◽  
Pole Body ◽  
Microtubule Motor ◽  
Gamma Tubulin ◽  
Meiosis I

The meiosis II spindle of Drosophila oocytes is distinctive in structure, consisting of two tandem spindles with anastral distal poles and an aster-associated spindle pole body between the central poles. Assembly of the anastral:astral meiosis II spindle occurs by reorganization of the meiosis I spindle, without breakdown of the meiosis I spindle. The unusual disk- or ring-shaped central spindle pole body forms de novo in the center of the elongated meiosis I spindle, followed by formation of the central spindle poles. gamma-Tubulin transiently localizes to the central spindle pole body, implying that the body acts as a microtubule nucleating center for assembly of the central poles. Localization of gamma-tubulin to the meiosis II spindle is dependent on the microtubule motor protein, Nonclaret disjunctional (Ncd). Absence of Ncd results in loss of gamma-tubulin localization to the spindle and destabilization of microtubules in the central region of the spindle. Assembly of the anastral:astral meiosis II spindle probably involves rapid reassortment of microtubule plus and minus ends in the center of the meiosis I spindle - this can be accounted for by a model that also accounts for the loss of gamma-tubulin localization to the spindle and destabilization of microtubules in the absence of Ncd.

Sign in / Sign up

Export Citation Format

Share Document