scholarly journals Aerodynamic and structural optimization of wind turbine blade with static aeroelastic effects

2019 ◽  
Vol 15 (1) ◽  
pp. 55-64
Author(s):  
Jie Zhu ◽  
Xiaohui Ni ◽  
Xiaomei Shen
Keyword(s):  
Structural Optimization ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Optimization Method ◽  
Wind Turbine Blade ◽  
Analysis Model ◽  
Element Analysis ◽  
Design Variables ◽  
Aeroelastic Analysis ◽  
Static Aeroelasticity

Abstract With the increasing size of wind turbine blade, the aeroelastic analysis becomes an essential step in the blade design process. The scope of this paper is to investigate the static aeroelastic effects between the fluid–structure interaction and improve the blade performances. First, the rigid and flexible blades are used to analyze the effects of static aeroelasticity on the blade aerodynamic and structural performances through a blade element momentum model coupled with 3D finite element analysis model. Based on this, a multi-objective aerodynamic and structural optimization method is proposed aiming at increasing the annual energy production and reducing blade mass, key parameters of the blade are employed as design variables, and various design requirements including strain, deflection, vibration and buckling limits are considered as constraints. Finally, a commercial 1.5 MW wind turbine blade is applied as a case study, and the optimization results show great improvements for the aerodynamic and structural performances of the blade.

Multi-objective structural optimization of a wind turbine blade using NSGA-II algorithm and FSI

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ramazan Özkan ◽  
Mustafa Serdar Genç
Keyword(s):  
Structural Optimization ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Wind Turbine Blade ◽  
Design Parameters ◽  
Aerodynamic Optimization ◽  
Nsga Ii ◽  
Content Type ◽  
Multi Objective ◽  
Optimization Study

Purpose Wind turbines are one of the best candidates to solve the problem of increasing energy demand in the world. The aim of this paper is to apply a multi-objective structural optimization study to a Phase II wind turbine blade produced by the National Renewable Energy Laboratory to obtain a more efficient small-scale wind turbine. Design/methodology/approach To solve this structural optimization problem, a new Non-Dominated Sorting Genetic Algorithm (NSGA-II) was performed. In the optimization study, the objective function was on minimization of mass and cost of the blade, and design parameters were composite material type and spar cap layer number. Design constraints were deformation, strain, stress, natural frequency and failure criteria. ANSYS Composite PrepPost (ACP) module was used to model the composite materials of the blade. Moreover, fluid–structure interaction (FSI) model in ANSYS was used to carry out flow and structural analysis on the blade. Findings As a result, a new original blade was designed using the multi-objective structural optimization study which has been adapted for aerodynamic optimization, the NSGA-II algorithm and FSI. The mass of three selected optimized blades using carbon composite decreased as much as 6.6%, 11.9% and 14.3%, respectively, while their costs increased by 23.1%, 29.9% and 38.3%. This multi-objective structural optimization-based study indicates that the composite configuration of the blade could be altered to reach the desired weight and cost for production. Originality/value ACP module is a novel and advanced composite modeling technique. This study is a novel study to present the NSGA-II algorithm, which has been adapted for aerodynamic optimization, together with the FSI. Unlike other studies, complex composite layup, fiber directions and layer orientations were defined by using the ACP module, and the composite blade analyzed both aerodynamic pressure and structural design using ACP and FSI modules together.

Strength Evaluation and Failure Prediction of a Composite Wind Turbine Blade Using Finite Element Analysis

2010 ◽  
Author(s):  
Prenil Poulose ◽  
Zhong Hu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Turbine Blades ◽  
Failure Prediction ◽  
Element Model ◽  
Wind Turbine Blade ◽  
Element Analysis ◽  
Strength Evaluation

Strength evaluation and failure prediction on a modern composite wind turbine blade have been conducted using finite element analysis. A 3-dimensional finite element model has been developed. Stresses and deflections in the blade under extreme storm conditions have been investigated for different materials. The conventional wood design turbine blade has been compared with the advanced E-glass fiber and Carbon epoxy composite blades. Strength has been analyzed and compared for blades with different laminated layer stacking sequences and fiber orientations for a composite material. Safety design and failure prediction have been conducted based on the different failure criteria. The simulation error estimation has been evaluated. Simulation results have shown that finite element analysis is crucial for designing and optimizing composite wind turbine blades.

Finite Element Analysis and Vibration Suppression Control of Smart Wind Turbine Blade

2011 ◽  
Vol 19 (3-4) ◽  
pp. 747-754 ◽  
Author(s):  
Yin-hu Qiao ◽  
Jiang Han ◽  
Chun-yan Zhang ◽  
Jie-ping Chen ◽  
Ke-chuan Yi
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Vibration Suppression ◽  
Wind Turbine Blade ◽  
Element Analysis

Failure Mode Estimation with Inter-Fiber Failure Analysis of Composite Wind Turbine Blade

2011 ◽  
Vol 109 ◽  
pp. 84-88
Author(s):  
Soo Hyun Kim ◽  
Hyung Joon Bang
Keyword(s):  
Composite Materials ◽  
Wind Turbine ◽  
Failure Mode ◽  
Turbine Blade ◽  
Fe Analysis ◽  
Wind Turbine Blade ◽  
Analysis Model ◽  
Fiber Failure ◽  
Static Test ◽  
Mode Estimation

This paper provides an overview of the failure mode estimation result with 3D finite element (FE) analysis model of wind turbine blade. In order to predict the realistic behavior in the whole blade region, fiber failure (FF) and inter-fiber failure (IFF) analysis were applied to account delamination or matrix failure on composite materials. The Puck’s fracture criteria were used for the IFF evaluation. For the comparison of FE analysis result with the measured data of static test, a 3.5m down-scaled wind turbine blade was designed and fabricated using glass fiber epoxy composite materials. A nonlinear static structural analysis was performed and then the failure mode and the location were estimated with the FF and IFF analysis.

Sign in / Sign up

Export Citation Format

Share Document