scholarly journals Genetic Variation in the Microfibril Angle of Loblolly Pine From Two Test Sites

2004 ◽  
Vol 28 (4) ◽  
pp. 196-204 ◽  
Author(s):  
Jennifer H. Myszewski ◽  
Floyd E. Bridgwater ◽  
William J. Lowe ◽  
Thomas D. Byram ◽  
Robert A. Megraw
Keyword(s):  
Specific Gravity ◽  
Loblolly Pine ◽  
Combining Ability ◽  
Growth Traits ◽  
Genetic Relationships ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Microfibril Angle ◽  
Narrow Sense Heritability ◽  
Individual Tree

Abstract In recent years, several studies have examined the effect of microfibril angle (MFA) on wood quality. However, little research has been conducted upon the genetic mechanisms controlling MFA. In this study, we examined the heritability of MFA in loblolly pine, Pinus taeda L.,and its genetic relationships with height, diameter, volume, and specific gravity. Increment cores were collected at breast height from 20 to 25 progeny from each of 12 to 17 crosses (among 11 parents) in two modified partial-diallels in different locations in southern Arkansas. Specific gravitywas measured on segments containing rings 1 through 5 and on segments containing rings 6 through 20. MFA was measured on the earlywood and latewood sections of rings 4, 5, 19, and 20. Rings 4 and 5 were chosen as representative of core wood and rings 19 and 20 as representative of outer wood. Analyses of variance revealed statistically significant genetic and environmental influences on MFA. Significant general combining ability (GCA), specific combining ability (SCA), and SCA × block effects indicated that there are both additive and nonadditive genetic influences on MFA. Individual-tree, narrow-sense heritability estimates were variable, ranging from 0.17 for earlywood (ring) 4 MFA to 0.51 for earlywood (ring) 20 MFA. Genetic correlations between MFA, specific gravity, and the growth traits were nonsignificant due to large estimated standard errors. South.J. Appl. For. 28(4):196–204.

scholarly journals Estimates of genetic parameters for oleoresin and growth traits in juvenile loblolly pine

2003 ◽  
Vol 33 (12) ◽  
pp. 2469-2476 ◽  
Author(s):  
James H Roberds ◽  
Brian L Strom ◽  
Fred P Hain ◽  
David P Gwaze ◽  
Steven E McKeand ◽  
...  
Keyword(s):  
Loblolly Pine ◽  
Growth Traits ◽  
Genetic Correlations ◽  
The United States ◽  
Dendroctonus Frontalis ◽  
Resin Flow ◽  
Narrow Sense Heritability ◽  
Diallel Mating Design ◽  
Santa Rosa County ◽  
Old Trees

In southern pines of the United States, resistance to attack by southern pine beetle, Dendroctonus frontalis Zimmermann, is believed to principally involve flow of oleoresin to beetle attack sites. Both environmental and genetic factors are known to affect the quantity of oleoresin flow in loblolly pine, Pinus taeda L., but little is known about the genetic contribution to phenotypic variation in this trait. Here we report estimates of genetic variation in oleoresin flow and growth traits for a population of this species. Oleoresin yield, total height, and diameter were measured on 10- and 11-year-old trees from an experimental test in Santa Rosa County, Florida. Trees were from 72 full-sib families produced by mating 48 parents according to a disconnected partial diallel mating design. Resin yield was determined from breast-height samples collected at two times: once in the summer of 1999 when latewood was being produced (summer resin flow), and once in the spring of 2000 during earlywood formation (spring resin flow). All traits studied were found to be highly genetically variable and to have much greater additive than dominance variance. Estimates of narrow-sense heritability for spring and summer resin flow were in the moderate range and are comparable to values obtained for the growth traits. Additive genetic correlations between oleoresin yield and the growth traits were positive and moderately high, suggesting that directional selection to improve growth in loblolly pine will also result in increased production of oleoresin.

Genetic parameters and gains for growth and wood properties in Florida source loblolly pine in the southeastern United States

2002 ◽  
Vol 32 (6) ◽  
pp. 1025-1038 ◽  
Author(s):  
Ryan A Atwood ◽  
Timothy L White ◽  
Dudley A Huber
Keyword(s):  
United States ◽  
Specific Gravity ◽  
Loblolly Pine ◽  
Growth Traits ◽  
Southeastern United States ◽  
Genetic Correlations ◽  
Wood Properties ◽  
Environment Interaction ◽  
Breeding Programs ◽  
Genotype Environment Interaction

One hundred and thirteen open-pollinated families from Florida source loblolly pine (Pinus taeda L.) were tested in four states in the southeastern United States. Heritabilities and genetic correlations were estimated for volume, specific gravity, and latewood percentage at three different growth stages: juvenile (ages 0–10 years), mature (11–17 years), and total (0–17 years). Heritabilities of growth traits (0.09–0.11) were consistently lower than for wood property traits (0.16–0.33). Growth traits for Florida loblolly exhibited high genotype × environment interaction (rB = 0.44), whereas wood properties did not (rB = 0.90). The higher heritabilities and genetic stability across environments make wood properties amenable to genetic manipulation through breeding programs. In contrast, the high genotype × environment interaction of growth traits for Florida loblolly pine requires more research to understand the possible implication of these effects on breeding programs. Trait–trait and age–age genetic correlations were determined for growth and wood properties. Strong positive age–age correlations were present for latewood percentage, volume, and specific gravity. Weak negative trait–trait genetic correlations existed between specific gravity and volume across ages (–0.13 to –0.43). No genetic correlation existed between latewood percentage and volume, while a moderate favorable genetic correlation existed between latewood percentage and specific gravity (0.47 to 0.59). Genetic gains in volume and specific gravity were compared for various types of selection. In one type, forward selection of the top 20 individuals (of 3484) based on 17-year volume, resulted in a 20.5% genetic gain in volume; however, a concomitant loss of –6.4% also occurred in specific gravity. If a selection index was used to hold specific gravity constant, a gain in total volume of 14% was obtained.

Genetic Variation in Acoustic Time of Flight and Drill Resistance of Juvenile Wood in a Large Loblolly Pine Breeding Population

2019 ◽  
Vol 65 (4) ◽  
pp. 469-482 ◽  
Author(s):  
Trevor D Walker ◽  
Fikret Isik ◽  
Steven E McKeand
Keyword(s):  
Specific Gravity ◽  
Loblolly Pine ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Time Of Flight ◽  
Phenotypic Correlation ◽  
Environment Interaction ◽  
Quality Traits ◽  
Economic Traits ◽  
Stem Straightness

AbstractAcoustic time of flight and drill resistance (surrogates for wood stiffness and density, respectively) were measured on 11,097 standing trees from 269 pollen-mix families of loblolly pine (Pinus taeda L.) in 6- to 9-year-old progeny tests at eight sites across the southeastern United States. Specific gravity was measured on two test sites. The phenotypic correlation between specific gravity and drill resistance was moderate (r = 0.68), whereas the genetic correlation was very strong (rg = 0.96). Narrow-sense heritabilities for acoustic time of flight and drill resistance were around 0.35 for individual trees and very strong (0.90) for family means. High genetic correlations (>0.80) between pairs of sites suggested a low genotype-by-environment interaction for both traits. Genetic correlations between wood quality traits and other economic traits (growth and stem straightness) were low except for a moderate correlation between acoustic time of flight and tree slenderness (rg = –0.64). The checklot ranked near the middle for both wood quality traits, implying no inadvertent selection occurred in this population that has been selected intensively for volume productivity. This study is the first to apply these tools in a large breeding program, and results suggest they are effective for selecting genotypes for wood quality.

scholarly journals Genetic Parameter Estimates for Growth Traits from Diallel Tests of Loblolly Pine Throughout the Southeastern United States

2008 ◽  
Vol 57 (1-6) ◽  
pp. 101-110 ◽  
Author(s):  
S. E. Mckeand ◽  
B. Li ◽  
J. E. Grissom ◽  
F. Isik ◽  
K. J. S. Jayawickrama
Keyword(s):  
United States ◽  
Loblolly Pine ◽  
Growth Traits ◽  
Additive Genetic Variance ◽  
Southeastern United States ◽  
Genetic Correlations ◽  
Parameter Estimates ◽  
Narrow Sense ◽  
Improvement Program ◽  
Individual Tree

Abstract Variation in heritability and in genetic correlation estimates were evaluated for juvenile tree height and volume for six testing areas of loblolly pine (Pinus taeda L.) in the southeastern United States. Variance components and their functions (heritability and type B genetic correlations) were estimated from 265 six-parent disconnected diallel series, tested in almost 1000 trials (4 tests per diallel series). Original data were collected at age 6 years from about one million trees (265 diallel series x 30 crosses x 36 trees per cross/site x 4 sites) planted in field tests. Genetic tests were from the second cycle of breeding in the North Carolina State University - Industry Cooperative Tree Improvement Program. The overall unbiased individual-tree narrow-sense heritability for height was 0.19 and for volume was 0.16. The broad-sense heritabilities for height (0.24) and for volume (0.22) were higher than narrow-sense heritabilities due to the presence of non-additive genetic variance. There were moderate regional differences in these estimates, with tests in the Lower Gulf Coastal Plain tending to have the highest heritabilities for growth traits. There was very little association between site index and heritability, but heritabilities were higher on sites with the highest survival and highest test precision. Genotype x environment interactions were generally low both for half-sib and full-sib families, indicating that families can be operationally deployed to different sites with little concern about unpredictable performance.

Heritabilities and additive genetic coefficients of variation in forest trees

1994 ◽  
Vol 24 (2) ◽  
pp. 372-379 ◽  
Author(s):  
Jonathan Cornelius
Keyword(s):  
Specific Gravity ◽  
Coefficient Of Variation ◽  
Growth Traits ◽  
Forest Trees ◽  
Individual Values ◽  
Narrow Sense Heritability ◽  
Individual Tree ◽  
Coefficients Of Variation ◽  
Genetic Coefficient Of Variation ◽  
Genetic Coefficient

Estimates of individual-tree narrow-sense heritability and additive genetic coefficient of variation of seven traits of forest trees were compiled from 67 published papers. Distributions of the values for each trait were characterized and compared by calculating medians and running Kolmogorov–Smirnov and Wilcoxon signed-rank tests. Generalizations are possible about at least some of the traits examined. Heritability of wood specific gravity was almost always above 0.3 (median 0.48). Heritabilities for other traits tended to be low: medians ranged from 0.185 to 0.26, and individual values generally ranged from 0.1 to 0.4. Evidence that heritabilities of form traits tend to be higher than those of growth traits was weak. The analysis of additive genetic coefficients of variation suggested that specific gravity tends to have lower values than other traits (median 5.1%), while height and diameter (medians 8.5 and 8.6%, respectively) had lower values than straightness (median 11.65%). Individual-tree volume showed the highest levels of additive genetic coefficient of variation (median 20.3%). The levels of additive genetic variation and heritabilities suggest that reasonable levels of genetic gain can be achieved by screening relatively low numbers of trees.

scholarly journals Non-Destructive Assessment of Wood Stiffness in Scots Pine (Pinus sylvestris L.) and its Use in Forest Tree Improvement

Forests ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 491 ◽  
Author(s):  
Irena Fundova ◽  
Tomas Funda ◽  
Harry X. Wu
Keyword(s):  
Scots Pine ◽  
Growth Traits ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Forest Tree ◽  
Wood Stiffness ◽  
Standing Trees ◽  
Genetic And Phenotypic Correlations ◽  
Sib Families ◽  
Using Data

Wood stiffness is an important wood mechanical property that predetermines the suitability of sawn timber for construction purposes. Negative genetic correlations between wood stiffness and growth traits have, however, been reported for many conifer species including Scots pine. It is, therefore, important that breeding programs consider wood stiffness and growth traits simultaneously. The study aims to (1) evaluate different approaches of calculating the dynamic modulus of elasticity (MOE, non-destructively assessed stiffness) using data from X-ray analysis (SilviScan) as a benchmark, (2) estimate genetic parameters, and (3) apply index selection. In total, we non-destructively measured 622 standing trees from 175 full-sib families for acoustic velocity (VEL) using Hitman and for wood density (DEN) using Resistograph and Pilodyn. We combined VEL with different wood densities, raw (DENRES) and adjusted (DENRES.TB) Resistograph density, Pilodyn density measured with (DENPIL) and without bark (DENPIL.B), constant of 1000 kg·m−3 (DENCONST), and SilviScan density (DENSILV), to calculate MOEs and compare them with the benchmark SilviScan MOE (MOESILV). We also derived Smith–Hazel indices for simultaneous improvement of stem diameter (DBH) and wood stiffness. The highest additive genetic and phenotypic correlations of the benchmark MOESILV with the alternative MOE measures (tested) were attained by MOEDENSILV (0.95 and 0.75, respectively) and were closely followed by MOEDENRES.TB (0.91 and 0.70, respectively) and MOEDENCONST and VEL (0.91 and 0.65, respectively for both). Correlations with MOEDENPIL, MOEDENPIL.B, and MOEDENRES were lower. Narrow-sense heritabilities were moderate, ranging from 0.39 (MOESILV) to 0.46 (MOEDENSILV). All indices revealed an opportunity for joint improvement of DBH and MOE. Conclusions: MOEDENRES.TB appears to be the most efficient approach for indirect selection for wood stiffness in Scots pine, although VEL alone and MOEDENCONST have provided very good results too. An index combining DBH and MOEDENRES.TB seems to offer the best compromise for simultaneous improvement of growth, fiber, and wood quality traits.

Breeding for improved growth and juvenile corewood stiffness in slash pine

2007 ◽  
Vol 37 (10) ◽  
pp. 1886-1893 ◽  
Author(s):  
Xiaobo Li ◽  
Dudley A. Huber ◽  
Gregory L. Powell ◽  
Timothy L. White ◽  
Gary F. Peter
Keyword(s):  
Genetic Correlation ◽  
Growth Traits ◽  
Low Cost ◽  
Genetic Correlations ◽  
Volume Growth ◽  
Pinus Elliottii ◽  
Tree Improvement ◽  
Slash Pine ◽  
Narrow Sense Heritability ◽  
Improvement Programs

The importance of integrating measures of juvenile corewood mechanical properties, modulus of elasticity in particular, with growth and disease resistance in tree improvement programs has increased. We investigated the utility of in-tree velocity stiffness measurements to estimate the genetic control of corewood stiffness and to select for trees with superior growth and stiffness in a progeny trial of 139 families of slash pine, Pinus elliottii Engelm. grown on six sites. Narrow-sense heritability estimates across all six sites for in-tree acoustic velocity stiffness at 8 years (0.42) were higher than observed for height (0.36) and diameter at breast height (DBH) (0.28) at 5 years. The overall type B genetic correlation across sites for velocity stiffness was 0.68, comparable to those found for DBH and volume growth, indicating that family rankings were moderately repeatable across all sites for these traits. No significant genetic correlations were observed between velocity stiffness, DBH, and volume growth. In contrast, a significant, but small, favorable genetic correlation was found between height and velocity stiffness. Twenty percent of the families had positive breeding values for both velocity stiffness and growth. The low cost, high heritability and nearly independent segregation of the genes involved with in-tree velocity stiffness and growth traits indicate that acoustic methods can be integrated into tree improvement programs to breed for improved corewood stiffness along with growth in slash pine.

Growth and wood properties of genetically improved loblolly pine: propagation type comparison and genetic parameters

2014 ◽  
Vol 44 (3) ◽  
pp. 263-272 ◽  
Author(s):  
Finto Antony ◽  
Laurence R. Schimleck ◽  
Lewis Jordan ◽  
Benjamin Hornsby ◽  
Joseph Dahlen ◽  
...  
Keyword(s):  
Wood Density ◽  
Loblolly Pine ◽  
Growth Traits ◽  
Genetic Correlations ◽  
Tree Height ◽  
Wood Properties ◽  
Genetically Improved ◽  
Growth Properties ◽  
Wood Traits ◽  
Clonal Lines

The use of clonal varieties in forestry offers great potential to improve growth traits (quantity) and wood properties (quality) of loblolly pine (Pinus taeda L.). Loblolly pine trees established via somatic embryogenesis (clones), full-sib zygotic crosses, and half-sib zygotic open-pollinated families were sampled to identify variation in growth and wood properties among and within clonal lines and zygotic controls. Increment cores 5 mm in diameter were collected at age 4 from a total of 2615 trees. Growth properties (diameter at 1.4 m and total tree height) and wood properties (whole-core density, latewood and earlywood density, and latewood percent) were measured for each tree sampled in the study. Overall, growth properties were better for full-sib seedling than for clonal lines, whereas wood density was higher for clonal lines than full-sib and open-pollinated seedlings. However, there were clonal lines with better growth and higher wood density. Clonal repeatability of both growth and wood properties across sampled sites and genetic correlations between growth and wood traits were determined, with higher repeatability observed for wood traits compared with growth traits. Significant genetic correlations were observed for tree height and wood properties, whereas weak correlations were observed for diameter and wood properties.

scholarly journals Genetic Control of Growth Traits in Shortleaf Pine in Missouri

2005 ◽  
Vol 29 (4) ◽  
pp. 200-204 ◽  
Author(s):  
David P. Gwaze ◽  
Ross Melick ◽  
Charly Studyvin ◽  
Mark Coggeshall
Keyword(s):  
Growth Traits ◽  
Genetic Correlations ◽  
Selection Criterion ◽  
Seed Orchard ◽  
Direct Selection ◽  
Pinus Echinata ◽  
Shortleaf Pine ◽  
Individual Tree ◽  
High Heritability ◽  
Heritability Estimates

Abstract Genetic parameters for height (HT), diameter (diameter at breast height [dbh]), and volume for a shortleaf pine (Pinus echinata Mill.) population in Missouri were estimated from a single progeny test comprising 44 half-sibling families assessed at 3, 5, 7, 10, and 17 years. Individual tree heritability estimates for growth traits at age 10 years and younger were high (0.30–0.43), and those at age 17 years were low (0.11–0.24). Heritability estimates for dbh were lower than those for HT. Family mean heritability estimates were moderate to high (0.32–0.66). Genetic correlations were higher than their phenotypic counterparts for all growth traits. Age-age genetic correlations for growth traits were moderate to high (0.68–0.98), indicating opportunity for early selection. Genetic correlations between different growth traits were high (0.81–1.00). Indirect selection on age 5- or 7-year HTs may be expected to produce over 25% more volume at 17 years compared with direct selection for volume at age 17 years. Efficiencies of selection suggest that early HT is a better selection criterion for volume at older ages than dbh because of the high heritability at young ages and strong juvenile-mature genetic correlations. Genetic gain in an unrogued seed orchard was predicted to be 6.7 and 27.2% for 10- and 17-year volume, respectively. These results suggest that growth traits in shortleaf pine in Missouri have high genetic variation, and genetic improvement was effective. South. J. Appl. For. 29(4):200–204.

Sign in / Sign up

Export Citation Format

Share Document