Analysis Of ??-hydroxy Butyric Acid, DL-lactic Acid, Glycolic Acid, Ethylene Glycol And Other Glycols In Body Fluids By A Direct Injection Gas Chromatography Mass Spectrometry Assay For Wide Use

2005 ◽  
Vol 27 (2) ◽  
pp. 227
Author(s):  
Paul Van hee ◽  
Hugo Neels ◽  
Mireille De Doncker ◽  
Nicolas Vrydags ◽  
Katinka Schatteman ◽  
...  
Author(s):  
Paul Van hee ◽  
Hugo Neels ◽  
Mireille De Doncker ◽  
Nicolas Vrydags ◽  
Katinka Schatteman ◽  
...  

AbstractAnalysis of blood of severely intoxicated patients always requires prompt investigation. Diagnosis of intoxication with ethylene glycol, γ-hydroxybutyric acid or D-lactic acid takes hours, since several different procedures are required. Rapid derivatization of the common hydroxyl function may resolve this analytical problem.Here we describe a fast method for the simultaneous measurement of ethylene glycol, glycolic acid, γ-hydroxybutyric acid and racemic lactic acid. Only 20 µl of serum, plasma or urine are required for immediate derivatization at 70°C with 750 µl of bis-N,O-trimethylsilyl trifluoroacetamide after adding 20 µl of internal standard solution (1,3-propylene glycol) and 20 µl of the catalyst dimethylformamide. After centrifugation an aliquot is transferred to a gas chromatographic system and analyzed with electron-impact mass spectrometry in selective ion monitoring mode.The derivatized acids and ethylene glycol are well separated and detected with a limit of detection ranging from 0.12 mg/l for ethylene glycol to 0.95 mg/l for γ-hydroxybutyric acid, while the limit of quantification ranged from 0.4 mg/l for ethylene glycol to 3.15 mg/l for γ-hydroxybutyric acid. The method is linear from 0.5 to 1800 mg/l blood for ethylene glycol, from 0.7 to 1200 mg/l for lactic acid, from 1.2 to 1800 mg/l for glycolic acid, and from 3.2 to 200 mg/l for γ-hydroxybutyric acid, with analytical recoveries, accuracy, day-to-day and within-day precision well within the required limits. Total analysis time with one calibrator was 30 min, derivatization time included.This method is very suitable for emergency toxicology, since several toxic substances can be quantified simultaneously in a fast and sensitive manner.


1971 ◽  
Vol 12 (3) ◽  
pp. 496-505 ◽  
Author(s):  
Carl-Gustaf Hammar ◽  
Balzar Alexanderson ◽  
Bo Holmstedt ◽  
Folke Sjôqvist

2021 ◽  
Vol 4 (1) ◽  
pp. 44-50
Author(s):  
Rhiby Ainur Basit Hariyanto ◽  
R. Arizal Firmansyah ◽  
R. Y. Perry Burhan ◽  
Yulfi Zetra

The desulphurization process of diesel fuel is carried out to reduce the amount of SO2 emissions that can cause acid rain. However, the desulphurization process in diesel fuel not only removes the sulfur compounds but polyaromatic and polar compounds are also eliminated during this process. The loss of these two compounds can reduce the lubricity properties of diesel fuel. Therefore, it is necessary to add an additive compound that can increase the lubricity properties. In this research, 2-hydroxyethyl ester (HEE) was synthesized as an additive to increase the lubricity of diesel fuel. This compound was synthesized through the transesterification reaction of soybean oil and ethylene glycol with K2CO3 as the base catalyst. The composition of the synthesized additives was analyzed using the Gas Chromatography-Mass Spectrometry (GC-MS). Based on the results of GC-MS spectrum analysis, it is known that the 2-hydroxyethyl ester compound has been formed with a yield of 66.5% (relative to the area of the chromatogram peak). The HEE compound obtained is a mixture of 2 hydroxyethyl palmitate, 2 hydroxyethyl linoleate, 2 hydroxyethyl stearate, 2 hydroxyethyl arachidonate, 2 hydroxyethyl nervate, and 2 hydroxyethyl behenate.


Sign in / Sign up

Export Citation Format

Share Document