scholarly journals Mechanical and possible auxetic properties of human Achilles tendon during in vitro testing to failure

2021 ◽  
Author(s):  
Christopher V. Nagelli ◽  
Alexander Hooke ◽  
Nicholas Quirk ◽  
Consuelo Lopez De Padilla ◽  
Timothy E. Hewett ◽  
...  
Keyword(s):  
Achilles Tendon ◽  
Three Dimensional ◽  
Proximal Region ◽  
Image Correlation ◽  
Healthy Human ◽  
Material Basis ◽  
Great Relevance ◽  
Longitudinal Strains ◽  
Very High

AbstractThe Achilles tendon is the strongest tendon in the human body, but the basis of its high tensile strength has not been elucidated in detail. Here we have loaded healthy, human, Achilles tendons to failure in an anatomically authentic fashion while studying the local three-dimensional deformation and strains in real time, with very high precision, using digital image correlation (DIC). These studies identified a remarkable degree of anisotropic, medio-lateral auxetic behavior, with Poisson’s ratios not exceeding minus 1 in any part of the tendon at any time; under certain loads, discrete areas within the tendon had a Poisson’s ratio below minus 6. Early in the loading cycle, the proximal region of the tendon accumulated high lateral strains while longitudinal strains remained low. This behavior shielded the mid-substance of the tendon, its weakest part, from high longitudinal strains until immediately before rupture. These new insights are of great relevance to understanding the material basis of tendon injuries, designing improved prosthetic replacements, and developing regenerative strategies.

A Novel Method for Optical High Spatiotemporal Strain Analysis for Transcatheter Aortic Valves In Vitro

2016 ◽  
Vol 138 (3) ◽  
Author(s):  
Simon Heide-Jørgensen ◽  
Sellaswasmy Kumaran Krishna ◽  
Jonas Taborsky ◽  
Tommy Bechsgaard ◽  
Rachid Zegdi ◽  
...  
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
Strain Analysis ◽  
Image Correlation ◽  
Deformation Analysis ◽  
Flow Loop ◽  
Transcatheter Aortic Valve ◽  
Wear And Tear ◽  
Valve Implantation

The transcatheter aortic valve implantation (TAVI) valve is a bioprosthetic valve within a metal stent frame. Like traditional surgical bioprosthetic valves, the TAVI valve leaflet tissue is expected to calcify and degrade over time. However, clinical studies of TAVI valve longevity are still limited. In order to indirectly assess the longevity of TAVI valves, an estimate of the mechanical wear and tear in terms of valvular deformation and strain of the leaflets under various conditions is warranted. The aim of this study was, therefore, to develop a platform for noncontact TAVI valve deformation analysis with both high temporal and spatial resolutions based on stereophotogrammetry and digital image correlation (DIC). A left-heart pulsatile in vitro flow loop system for mounting of TAVI valves was designed. The system enabled high-resolution imaging of all three TAVI valve leaflets simultaneously for up to 2000 frames per second through two high-speed cameras allowing three-dimensional analyses. A coating technique for applying a stochastic pattern on the leaflets of the TAVI valve was developed. The technique allowed a pattern recognition software to apply frame-by-frame cross correlation based deformation measurements from which the leaflet motions and the strain fields were derived. The spatiotemporal development of a very detailed strain field was obtained with a 0.5 ms time resolution and a spatial resolution of 72 μm/pixel. Hence, a platform offering a new and enhanced supplementary experimental evaluation of tissue valves during various conditions in vitro is presented.

scholarly journals Scaffold-free cell-based tissue engineering therapies: advances, shortfalls and forecast

2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Andrea De Pieri ◽  
Yury Rochev ◽  
Dimitrios I. Zeugolis
Keyword(s):  
Tissue Engineering ◽  
Ex Vivo ◽  
Three Dimensional ◽  
Free Cell ◽  
In Vitro Organogenesis ◽  
Success Stories ◽  
Automation Systems ◽  
Ex Vivo Culture ◽  
Very High

AbstractCell-based scaffold-free therapies seek to develop in vitro organotypic three-dimensional (3D) tissue-like surrogates, capitalising upon the inherent capacity of cells to create tissues with efficiency and sophistication that is still unparalleled by human-made devices. Although automation systems have been realised and (some) success stories have been witnessed over the years in clinical and commercial arenas, in vitro organogenesis is far from becoming a standard way of care. This limited technology transfer is largely attributed to scalability-associated costs, considering that the development of a borderline 3D implantable device requires very high number of functional cells and prolonged ex vivo culture periods. Herein, we critically discuss advancements and shortfalls of scaffold-free cell-based tissue engineering strategies, along with pioneering concepts that have the potential to transform regenerative and reparative medicine.

Ultrastructural Investigations of the Contractile Filaments of Amoebae

1974 ◽  
Vol 32 ◽  
pp. 188-189
Author(s):  
P.L. Moore
Keyword(s):  
Cytoplasmic Streaming ◽  
Three Dimensional ◽  
Freeze Fracture ◽  
Amoeboid Movement ◽  
Different Types ◽  
Chemical Conditions ◽  
Complete Interpretation

Previous freeze fracture results on the intact giant, amoeba Chaos carolinensis indicated the presence of a fibrillar arrangement of filaments within the cytoplasm. A complete interpretation of the three dimensional ultrastructure of these structures, and their possible role in amoeboid movement was not possible, since comparable results could not be obtained with conventional fixation of intact amoebae. Progress in interpreting the freeze fracture images of amoebae required a more thorough understanding of the different types of filaments present in amoebae, and of the ways in which they could be organized while remaining functional.The recent development of a calcium sensitive, demembranated, amoeboid model of Chaos carolinensis has made it possible to achieve a better understanding of such functional arrangements of amoeboid filaments. In these models the motility of demembranated cytoplasm can be controlled in vitro, and the chemical conditions necessary for contractility, and cytoplasmic streaming can be investigated. It is clear from these studies that “fibrils” exist in amoeboid models, and that they are capable of contracting along their length under conditions similar to those which cause contraction in vertebrate muscles.

Correlated Studies of Cellular Interactions Using TEM, Freeze Etching, and SEM

1974 ◽  
Vol 32 ◽  
pp. 320-321
Author(s):  
J. P. Revel
Keyword(s):  
Developmental Stages ◽  
Three Dimensional ◽  
Cell Movement ◽  
Cellular Interactions ◽  
Serial Sections ◽  
Cell Sheets ◽  
Freeze Etching ◽  
Early Developmental

Movement of individual cells or of cell sheets and complex patterns of folding play a prominent role in the early developmental stages of the embryo. Our understanding of these processes is based on three- dimensional reconstructions laboriously prepared from serial sections, and from autoradiographic and other studies. Many concepts have also evolved from extrapolation of investigations of cell movement carried out in vitro. The scanning electron microscope now allows us to examine some of these events in situ. It is possible to prepare dissections of embryos and even of tissues of adult animals which reveal existing relationships between various structures more readily than used to be possible vithout an SEM.

In vitro and in vivo polysaccharides assembly: ultrastructural and cytochemical study of growing plant cell wall components.

1978 ◽  
Vol 36 (2) ◽  
pp. 434-435
Author(s):  
D. Reis ◽  
B. Vian ◽  
J. C. Roland
Keyword(s):  
Cell Wall ◽  
Self Assembly ◽  
Plant Cell Wall ◽  
Higher Plants ◽  
Three Dimensional ◽  
Cytochemical Study ◽  
Wall Components

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.

Hormonal modulation of ishikawa cells during three-dimensional growth in vitro☆

1998 ◽  
Vol 5 (4) ◽  
pp. 217-223 ◽  
Author(s):  
D PINELLI ◽  
J DRAKE ◽  
M WILLIAMS ◽  
D CAVANAGH ◽  
J BECKER
Keyword(s):  
Three Dimensional ◽  
Ishikawa Cells ◽  
Hormonal Modulation ◽  
Dimensional Growth

500 An in vitro steady flow model of mitral regurgitation by three-dimensional Doppler

1999 ◽  
Vol 1 ◽  
pp. S86-S86
Author(s):  
R DESIMONE ◽  
G GLOMBITZA ◽  
C VAHL ◽  
H MEINZER ◽  
S HAGL
Keyword(s):  
Mitral Regurgitation ◽  
Steady Flow ◽  
Flow Model ◽  
Three Dimensional

Daunorubicin and Platelet Function

1981 ◽  
Vol 45 (01) ◽  
pp. 038-042 ◽  
Author(s):  
M E Pogliani ◽  
R Fantasia ◽  
G Lambertenghi-Deliliers ◽  
E Cofrancesco
Keyword(s):  
Electron Microscope ◽  
Cellular Membrane ◽  
Hemorrhagic Diathesis ◽  
Clot Retraction ◽  
Freezing And Thawing ◽  
Platelet Factor ◽  
High Doses ◽  
Very High ◽  
Platelet Functions

SummaryThe influence of Daunorubicin on some platelet functions in vitro was investigated, using different concentrations of the drug (0.01-0.02-0.04 μg/ml). Daunorubicin was shown to inhibit Collagen and Thrombin induced platelet aggregation and the intensity of inhibition depended on both drug concentration and the time of preincubation.Daunorubicin was also shown to inhibit the release reaction, the platelet prostaglandin pathway and the availability platelet factor 3; the drug at concentrations for clinical use does not damage the platelet membrane, as is the case with the freezing and thawing test, in platelet uptake of 14C-serotonin and as confirmed by the electron microscope. When very high doses (0.16 mg) of Daunorubicin are used, lysis of the platelets can be observed and this is confirmed under the electron microscope by the presence of empty platelets with fractures at the level of the cytoplasmic membrane.Finally, Daunorubicin causes irreversible inhibition of reptilase clot-retraction, even if this is less severe than with Vincristine. Working with gel-filtered platelets, it would appear that the inhibition exercised by the drug on platelet reactions is not caused through modifications in Ca++ metabolism.The authors suggest that Daunorubicin, at the dosages used clinically, induces in vitro thrombocytopathy without damaging the cellular membrane as confirmed by the electron microscope.This impairment of platelet functions could play a part in hemorrhagic diathesis observed during Daunorubicin therapy.

Effects of Heparin Oligosaccharides with High Affinity for Antithrombin III in Experimental Venous Thrombosis

1982 ◽  
Vol 47 (03) ◽  
pp. 244-248 ◽  
Author(s):  
D P Thomas ◽  
Rosemary E Merton ◽  
T W Barrowcliffe ◽  
L Thunberg ◽  
U Lindahl
Keyword(s):  
Antithrombin Iii ◽  
Specific Activity ◽  
High Specific Activity ◽  
Factor Xa ◽  
Blood Levels ◽  
Thrombin Time ◽  
High Affinity ◽  
Very High

SummaryThe in vitro and in vivo characteristics of two oligosaccharide heparin fragments have been compared to those of unfractionated mucosal heparin. A decasaccharide fragment had essentially no activity by APTT or calcium thrombin time assays in vitro, but possessed very high specific activity by anti-Factor Xa assays. When injected into rabbits at doses of up to 80 ¼g/kg, this fragment was relatively ineffective in impairing stasis thrombosis despite producing high blood levels by anti-Xa assays. A 16-18 monosaccharide fragment had even higher specific activity (almost 2000 iu/mg) by chromogenic substrate anti-Xa assay, with minimal activity by APTT. When injected in vivo, this fragment gave low blood levels by APTT, very high anti-Xa levels, and was more effective in preventing thrombosis than the decasaccharide fragment. However, in comparison with unfractionated heparin, the 16-18 monosaccharide fragment was only partially effective in preventing thrombosis, despite producing much higher blood levels by anti-Xa assays.It is concluded that the high-affinity binding of a heparin fragment to antithrombin III does not by itself impair venous thrombogenesis, and that the anti-Factor Xa activity of heparin is only a partial expression of its therapeutic potential.

Controlled Release of Metformin Hydrochloride I. In vitro Release from Physical Mixture Containing Xanthan Gum as Hydrophilic Rate Retarding Polymer

1970 ◽  
Vol 4 (1) ◽  
Author(s):  
Mashkura Ashrafi ◽  
Jakir Ahmed Chowdhury ◽  
Md Selim Reza
Keyword(s):  
Controlled Release ◽  
Xanthan Gum ◽  
In Vitro Release ◽  
Correlation Coefficients ◽  
High Ratio ◽  
Water Soluble ◽  
Metformin Hydrochloride ◽  
Model Drug ◽  
Very High

Capsules of different formulations were prepared by using a hydrophilic polymer, xanthan gum and a filler Ludipress. Metformin hydrochloride, which is an anti-diabetic agent, was used as a model drug here with the aim to formulate sustained release capsules. In the first 6 formulations, metformin hydrochloride and xanthan gum were used in different ratio. Later, Ludipress was added to the formulations in a percentage of 8% to 41%. The total procedure was carried out by physical mixing of the ingredients and filling in capsule shells of size ‘1’. As metformin hydrochloride is a highly water soluble drug, the dissolution test was done in 250 ml distilled water in a thermal shaker (Memmert) with a shaking speed of 50 rpm at 370C &plusmn 0.50C for 6 hours. After the dissolution, the data were treated with different kinetic models. The results found from the graphs and data show that the formulations follow the Higuchian release pattern as they showed correlation coefficients greater than 0.99 and the sustaining effect of the formulations was very high when the xanthan gum was used in a very high ratio with the drug. It was also investigated that the Ludipress extended the sustaining effect of the formulation to some extent. But after a certain period, Ludipress did not show any significant effect as the pores made by the xanthan gum network were already blocked. It is found here that when the metformin hydrochloride and the xanthan gum ratio was 1:1, showed a high percentage of drug release, i.e. 91.80% of drug was released after 6 hours. But With a xanthan gum and metformin hydrochloride ratio of 6:1, a very slow release of the drug was obtained. Only 66.68% of the drug was released after 6 hours. The percent loading in this case was 14%. Again, when Ludipress was used in high ratio, it was found to retard the release rate more prominently. Key words: Metformin Hydrochloride, Xanthan Gum, Controlled release capsule Dhaka Univ. J. Pharm. Sci. Vol.4(1) 2005 The full text is of this article is available at the Dhaka Univ. J. Pharm. Sci. website

Sign in / Sign up

Export Citation Format

Share Document