scholarly journals De novo diploid genome assembly for genome-wide structural variant detection

2019 ◽  
Author(s):  
Lu Zhang ◽  
Xin Zhou ◽  
Ziming Weng ◽  
Arend Sidow
Keyword(s):  
De Novo ◽  
Pairwise Alignment ◽  
Cost Effective ◽  
Personal Genome ◽  
Ancestral State ◽  
Short Fragment ◽  
Fundamental Limitations ◽  
Long Read ◽  
Alternative Means ◽  
Variant Detection

AbstractStructural variants (SVs) in a personal genome are important but, for all practical purposes, impossible to detect comprehensively by standard short-fragment sequencing. De novo assembly, traditionally used to generate reference genomes, offers an alternative means for variant detection and phasing but has not been applied broadly to human genomes because of fundamental limitations of short-fragment approaches and high cost of long-read technologies. We here show that 10x linked-read sequencing, which has been applied to assemble human diploid genomes into high quality contigs, supports accurate SV detection. We examined variants in six de novo 10x assemblies with diverse experimental parameters from two commonly used human cell lines, NA12878 and NA24385. The assemblies are effective in detecting mid-size SVs, which were discovered by simple pairwise alignment of the assemblies’ contigs to the reference (hg38). Our study also shows that the accuracy of SV breakpoint at base-pair level is high, with a majority (80% for deletion and 70% for insertion) of SVs having precisely correct sizes and breakpoints (<2bp difference). Finally, setting the ancestral state of SV loci by comparing to ape orthologs allows inference of the actual molecular mechanism (insertion or deletion) causing the mutation, which in about half of cases is opposite to that of the reference-based call. Interestingly, we uncover 214 SVs that may have been maintained as polymorphisms in the human lineage since before our divergence from chimp. Overall, we show that de novo assembly of 10x linked-read data can achieve cost-effective SV detection for personal genomes.

scholarly journals De novo diploid genome assembly for genome-wide structural variant detection

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Lu Zhang ◽  
Xin Zhou ◽  
Ziming Weng ◽  
Arend Sidow
Keyword(s):  
De Novo Assembly ◽  
De Novo ◽  
Pairwise Alignment ◽  
Cost Effective ◽  
Difficult Problem ◽  
Ancestral State ◽  
Fundamental Limitations ◽  
Human Genomes ◽  
Genome Wide ◽  
Long Read

Abstract Detection of structural variants (SVs) on the basis of read alignment to a reference genome remains a difficult problem. De novo assembly, traditionally used to generate reference genomes, offers an alternative for SV detection. However, it has not been applied broadly to human genomes because of fundamental limitations of short-fragment approaches and high cost of long-read technologies. We here show that 10× linked-read sequencing supports accurate SV detection. We examined variants in six de novo 10× assemblies with diverse experimental parameters from two commonly used human cell lines: NA12878 and NA24385. The assemblies are effective for detecting mid-size SVs, which were discovered by simple pairwise alignment of the assemblies’ contigs to the reference (hg38). Our study also shows that the base-pair level SV breakpoint accuracy is high, with a majority of SVs having precisely correct sizes and breakpoints. Setting the ancestral state of SV loci by comparing to ape orthologs allows inference of the actual molecular mechanism (insertion or deletion) causing the mutation. In about half of cases, the mechanism is the opposite of the reference-based call. We uncover 214 SVs that may have been maintained as polymorphisms in the human lineage since before our divergence from chimp. Overall, we show that de novo assembly of 10× linked-read data can achieve cost-effective SV detection for personal genomes.

scholarly journals ECNano: A Cost-Effective Workflow for Target Enrichment Sequencing and Accurate Variant Calling on 4,800 Clinically Significant Genes Using a Single MinION Flowcell

2021 ◽  
Author(s):  
Amy Wing-Sze Leung ◽  
Henry Chi-Ming Leung ◽  
Chak-Lim Wong ◽  
Zhen-Xian Zheng ◽  
Wui-Wang Lui ◽  
...  
Keyword(s):  
Variant Calling ◽  
Cost Effective ◽  
Turnaround Time ◽  
Read Length ◽  
Sequencing Error ◽  
Target Enrichment ◽  
Long Read ◽  
Wet Lab ◽  
Variant Detection ◽  
Clinically Significant

Background: The application of long-read sequencing using the Oxford Nanopore Technologies (ONT) MinION sequencer is getting more diverse in the medical field. Having a high sequencing error of ONT and limited throughput from a single MinION flowcell, however, limits its applicability for accurate variant detection. Medical exome sequencing (MES) targets clinically significant exon regions, allowing rapid and comprehensive screening of pathogenic variants. By applying MES with MinION sequencing, the technology can achieve a more uniform capture of the target regions, shorter turnaround time, and lower sequencing cost per sample. Method: We introduced a cost-effective optimized workflow, ECNano, comprising a wet-lab protocol and bioinformatics analysis, for accurate variant detection at 4,800 clinically important genes and regions using a single MinION flowcell. The ECNano wet-lab protocol was optimized to perform long-read target enrichment and ONT library preparation to stably generate high-quality MES data with adequate coverage. The subsequent variant-calling workflow, Clair-ensemble, adopted a fast RNN-based variant caller, Clair, and was optimized for target enrichment data. To evaluate its performance and practicality, ECNano was tested on both reference DNA samples and patient samples. Results: ECNano achieved deep on-target depth of coverage (DoC) at average >100x and >98% uniformity using one MinION flowcell. For accurate ONT variant calling, the generated reads sufficiently covered 98.9% of pathogenic positions listed in ClinVar, with 98.96% having at least 30x DoC. ECNano obtained an average read length of 1,000 bp. The long reads of ECNano also covered the adjacent splice sites well, with 98.5% of positions having ≥ 30x DoC. Clair-ensemble achieved >99% recall and accuracy for SNV calling. The whole workflow from wet-lab protocol to variant detection was completed within three days. Conclusion: We presented ECNano, an out-of-the-box workflow comprising (1) a wet-lab protocol for ONT target enrichment sequencing and (2) a downstream variant detection workflow, Clair-ensemble. The workflow is cost-effective, with a short turnaround time for high accuracy variant calling in 4,800 clinically significant genes and regions using a single MinION flowcell. The long-read exon captured data has potential for further development, promoting the application of long-read sequencing in personalized disease treatment and risk prediction.

scholarly journals Long-read genome sequencing for the diagnosis of neurodevelopmental disorders

2020 ◽  
Author(s):  
Susan M. Hiatt ◽  
James M.J. Lawlor ◽  
Lori H. Handley ◽  
Ryne C. Ramaker ◽  
Brianne B. Rogers ◽  
...  
Keyword(s):  
Genome Sequencing ◽  
Neurodevelopmental Disorders ◽  
De Novo ◽  
Genomic Analysis ◽  
Data Sets ◽  
Short Read ◽  
Long Read ◽  
Variant Detection ◽  
Circular Consensus Sequencing

AbstractPurposeExome and genome sequencing have proven to be effective tools for the diagnosis of neurodevelopmental disorders (NDDs), but large fractions of NDDs cannot be attributed to currently detectable genetic variation. This is likely, at least in part, a result of the fact that many genetic variants are difficult or impossible to detect through typical short-read sequencing approaches.MethodsHere, we describe a genomic analysis using Pacific Biosciences circular consensus sequencing (CCS) reads, which are both long (>10 kb) and accurate (>99% bp accuracy). We used CCS on six proband-parent trios with NDDs that were unexplained despite extensive testing, including genome sequencing with short reads.ResultsWe identified variants and created de novo assemblies in each trio, with global metrics indicating these data sets are more accurate and comprehensive than those provided by short-read data. In one proband, we identified a likely pathogenic (LP), de novo L1-mediated insertion in CDKL5 that results in duplication of exon 3, leading to a frameshift. In a second proband, we identified multiple large de novo structural variants, including insertion-translocations affecting DGKB and MLLT3, which we show disrupt MLLT3 transcript levels. We consider this extensive structural variation likely pathogenic.ConclusionThe breadth and quality of variant detection, coupled to finding variants of clinical and research interest in two of six probands with unexplained NDDs strongly support the value of long-read genome sequencing for understanding rare disease.

scholarly journals Assessment of human diploid genome assembly with 10x Linked-Reads data

2019 ◽  
Author(s):  
Lu Zhang ◽  
Xin Zhou ◽  
Ziming Weng ◽  
Arend Sidow
Keyword(s):  
Parameter Space ◽  
Genome Assembly ◽  
De Novo ◽  
Cost Effective ◽  
Personal Genome ◽  
Dna Fragments ◽  
Data Generation ◽  
Library Preparation ◽  
Assembly Quality ◽  
Practical Guidelines

AbstractBackgroundProducing cost-effective haplotype-resolved personal genomes remains challenging. 10x Linked-Read sequencing, with its high base quality and long-range information, has been demonstrated to facilitate de novo assembly of human genomes and variant detection. In this study, we investigate in depth how the parameter space of 10x library preparation and sequencing affects assembly quality, on the basis of both simulated and real libraries.FindingsWe prepared and sequenced eight 10x libraries with a diverse set of parameters from standard cell lines NA12878 and NA24385 and performed whole genome assembly on the data. We also developed the simulator LRTK-SIM to follow the workflow of 10x data generation and produce realistic simulated Linked-Read data sets. We found that assembly quality could be improved by increasing the total sequencing coverage (C) and keeping physical coverage of DNA fragments (CF) or read coverage per fragment (CR) within broad ranges. The optimal physical coverage was between 332X and 823X and assembly quality worsened if it increased to greater than 1,000X for a given C. Long DNA fragments could significantly extend phase blocks, but decreased contig contiguity. The optimal length-weighted fragment length (WμFL) was around 50 – 150kb. When broadly optimal parameters were used for library preparation and sequencing, ca. 80% of the genome was assembled in a diploid state.ConclusionThe Linked-Read libraries we generated and the parameter space we identified provide theoretical considerations and practical guidelines for personal genome assemblies based on 10x Linked-Read sequencing.

scholarly journals Ultra-low input single tube linked-read library method enables short-read NGS systems to generate highly accurate and economical long-range sequencing information for de novo genome assembly and haplotype phasing

2019 ◽  
Author(s):  
Zhoutao Chen ◽  
Long Pham ◽  
Tsai-Chin Wu ◽  
Guoya Mo ◽  
Yu Xia ◽  
...  
Keyword(s):  
Long Range ◽  
De Novo ◽  
Low Cost ◽  
Cost Effective ◽  
De Novo Genome Assembly ◽  
Short Read ◽  
Single Tube ◽  
Haplotype Phasing ◽  
A Genome ◽  
Long Read

AbstractLong-range sequencing information is required for haplotype phasing, de novo assembly and structural variation detection. Current long-read sequencing technologies can provide valuable long-range information but at a high cost with low accuracy and high DNA input requirement. We have developed a single-tube Transposase Enzyme Linked Long-read Sequencing (TELL-Seq™) technology, which enables a low-cost, high-accuracy and high-throughput short-read next generation sequencer to routinely generate over 100 Kb long-range sequencing information with as little as 0.1 ng input material. In a PCR tube, millions of clonally barcoded beads are used to uniquely barcode long DNA molecules in an open bulk reaction without dilution and compartmentation. The barcode linked reads are used to successfully assemble genomes ranging from microbes to human. These linked-reads also generate mega-base-long phased blocks and provide a cost-effective tool for detecting structural variants in a genome, which are important to identify compound heterozygosity in recessive Mendelian diseases and discover genetic drivers and diagnostic biomarkers in cancers.

scholarly journals Comparative Annotation Toolkit (CAT) - simultaneous clade and personal genome annotation

2017 ◽  
Author(s):  
Ian T. Fiddes ◽  
Joel Armstrong ◽  
Mark Diekhans ◽  
Stefanie Nachtweide ◽  
Zev N. Kronenberg ◽  
...  
Keyword(s):  
Genome Annotation ◽  
De Novo ◽  
Low Cost ◽  
Great Apes ◽  
Personal Genome ◽  
Sequencing Technologies ◽  
Human Genomes ◽  
Long Read ◽  
Genome Assemblies ◽  
Rat Genome

ABSTRACTThe recent introductions of low-cost, long-read, and read-cloud sequencing technologies coupled with intense efforts to develop efficient algorithms have made affordable, high-quality de novo sequence assembly a realistic proposition. The result is an explosion of new, ultra-contiguous genome assemblies. To compare these genomes we need robust methods for genome annotation. We describe the fully open source Comparative Annotation Toolkit (CAT), which provides a flexible way to simultaneously annotate entire clades and identify orthology relationships. We show that CAT can be used to improve annotations on the rat genome, annotate the great apes, annotate a diverse set of mammals, and annotate personal, diploid human genomes. We demonstrate the resulting discovery of novel genes, isoforms and structural variants, even in genomes as well studied as rat and the great apes, and how these annotations improve cross-species RNA expression experiments.

scholarly journals Genomic Surveillance for Antimicrobial Resistance inMannheimia haemolyticaUsing Nanopore Single Molecule Sequencing Technology

2018 ◽  
Author(s):  
Alexander Lim ◽  
Bryan Naidenov ◽  
Haley Bates ◽  
Karyn Willyerd ◽  
Timothy Snider ◽  
...  
Keyword(s):  
Antibiotic Resistance ◽  
Antimicrobial Resistance ◽  
Single Molecule ◽  
Resistant Strain ◽  
De Novo ◽  
Gene Annotation ◽  
Cost Effective ◽  
Multidrug Resistant ◽  
Oxford Nanopore ◽  
Long Read

AbstractDisruptive innovations in long-range, cost-effective direct template nucleic acid sequencing are transforming clinical and diagnostic medicine. A multidrug resistant strain and a pan-susceptible strain ofMannheimia haemolytica, isolated from pneumonic bovine lung samples, were respectively sequenced at 146x and 111x coverage with Oxford Nanopore Technologies MinION.De novoassembly produced a complete genome for the non-resistant strain and a nearly complete assembly for the drug resistant strain. Functional annotation using RAST (Rapid Annotations using Subsystems Technology), CARD (Comprehensive Antibiotic Resistance Database) and ResFinder databases identified genes conferring resistance to different classes of antibiotics including beta lactams, tetracyclines, lincosamides, phenicols, aminoglycosides, sulfonamides and macrolides. Antibiotic resistance phenotypes of theM. haemolyticastrains were confirmed with minimum inhibitory concentration (MIC) assays. The sequencing capacity of highly portable MinION devices was verified by sub-sampling sequencing reads; potential for antimicrobial resistance determined by identification of resistance genes in the draft assemblies with as little as 5,437 MinION reads corresponded to all classes of MIC assays. The resulting quality assemblies and AMR gene annotation highlight efficiency of ultra long-read, whole-genome sequencing (WGS) as a valuable tool in diagnostic veterinary medicine.

scholarly journals Highly-accurate long-read sequencing improves variant detection and assembly of a human genome

2019 ◽  
Author(s):  
Aaron M. Wenger ◽  
Paul Peluso ◽  
William J. Rowell ◽  
Pi-Chuan Chang ◽  
Richard J. Hall ◽  
...  
Keyword(s):  
Single Molecule ◽  
De Novo ◽  
Structural Variants ◽  
Short Reads ◽  
Sequencing Technologies ◽  
Long Reads ◽  
Long Read ◽  
Variant Detection ◽  
High Quality Genome ◽  
Circular Consensus Sequencing

AbstractThe major DNA sequencing technologies in use today produce either highly-accurate short reads or noisy long reads. We developed a protocol based on single-molecule, circular consensus sequencing (CCS) to generate highly-accurate (99.8%) long reads averaging 13.5 kb and applied it to sequence the well-characterized human HG002/NA24385. We optimized existing tools to comprehensively detect variants, achieving precision and recall above 99.91% for SNVs, 95.98% for indels, and 95.99% for structural variants. We estimate that 2,434 discordances are correctable mistakes in the high-quality Genome in a Bottle benchmark. Nearly all (99.64%) variants are phased into haplotypes, which further improves variant detection. De novo assembly produces a highly contiguous and accurate genome with contig N50 above 15 Mb and concordance of 99.998%. CCS reads match short reads for small variant detection, while enabling structural variant detection and de novo assembly at similar contiguity and markedly higher concordance than noisy long reads.

scholarly journals How well can we create phased, diploid, human genomes?: An assessment of FALCON-Unzip phasing using a human trio

2018 ◽  
Author(s):  
Arkarachai Fungtammasan ◽  
Brett Hannigan
Keyword(s):  
De Novo ◽  
Personal Genome ◽  
Specific Expression ◽  
Human Genomes ◽  
Future Improvement ◽  
Long Read ◽  
Allele Specific ◽  
Personal Genomes ◽  
Reference Genomes ◽  
Haplotype Information

ABSTRACTLong read sequencing technology has allowed researchers to create de novo assemblies with impressive continuity[1,2]. This advancement has dramatically increased the number of reference genomes available and hints at the possibility of a future where personal genomes are assembled rather than resequenced. In 2016 Pacific Biosciences released the FALCON-Unzip framework, which can provide long, phased haplotype contigs from de novo assemblies. This phased genome algorithm enhances the accuracy of highly heterozygous organisms and allows researchers to explore questions that require haplotype information such as allele-specific expression and regulation. However, validation of this technique has been limited to small genomes or inbred individuals[3].As a roadmap to personal genome assembly and phasing, we assess the phasing accuracy of FALCON-Unzip in humans using publicly available data for the Ashkenazi trio from the Genome in a Bottle Consortium[4]. To assess the accuracy of the Unzip algorithm, we assembled the genome of the son using FALCON and FALCON Unzip, genotyped publicly available short read data for the mother and the father, and observed the inheritance pattern of the parental SNPs along the phased genome of the son. We found that 72.8% of haplotype contigs share SNPs with only one parent suggesting that these contigs are correctly phased. Most mis-phased SNPs are random but present in high frequency toward the end of haplotype contigs. Approximately 20.7% of mis-phased haplotype contigs contain clusters of mis-phased SNPs, suggesting that haplotypes were mis-joined by FALCON-Unzip. Mis-joined boundaries in those contigs are located in areas of low SNP density. This research demonstrates that the FALCON-Unzip algorithm can be used to create long and accurate haplotypes for humans and identifies problematic regions that could benefit in future improvement.

scholarly journals Assessment of human diploid genome assembly with 10x Linked-Reads data

GigaScience ◽  
2019 ◽  
Vol 8 (11) ◽  
Author(s):  
Lu Zhang ◽  
Xin Zhou ◽  
Ziming Weng ◽  
Arend Sidow
Keyword(s):  
Parameter Space ◽  
Genome Assembly ◽  
De Novo ◽  
Cost Effective ◽  
Personal Genome ◽  
Dna Fragments ◽  
Data Generation ◽  
Library Preparation ◽  
Assembly Quality ◽  
Practical Guidelines

Abstract Background Producing cost-effective haplotype-resolved personal genomes remains challenging. 10x Linked-Read sequencing, with its high base quality and long-range information, has been demonstrated to facilitate de novo assembly of human genomes and variant detection. In this study, we investigate in depth how the parameter space of 10x library preparation and sequencing affects assembly quality, on the basis of both simulated and real libraries. Results We prepared and sequenced eight 10x libraries with a diverse set of parameters from standard cell lines NA12878 and NA24385 and performed whole-genome assembly on the data. We also developed the simulator LRTK-SIM to follow the workflow of 10x data generation and produce realistic simulated Linked-Read data sets. We found that assembly quality could be improved by increasing the total sequencing coverage (C) and keeping physical coverage of DNA fragments (CF) or read coverage per fragment (CR) within broad ranges. The optimal physical coverage was between 332× and 823× and assembly quality worsened if it increased to >1,000× for a given C. Long DNA fragments could significantly extend phase blocks but decreased contig contiguity. The optimal length-weighted fragment length (W${\mu _{FL}}$) was ∼50–150 kb. When broadly optimal parameters were used for library preparation and sequencing, ∼80% of the genome was assembled in a diploid state. Conclusions The Linked-Read libraries we generated and the parameter space we identified provide theoretical considerations and practical guidelines for personal genome assemblies based on 10x Linked-Read sequencing.

Sign in / Sign up

Export Citation Format

Share Document