Scaling anomaly at the critical transition of an incommensurate structure

1987 ◽  
Vol 36 (12) ◽  
pp. 5858-5861 ◽  
Author(s):  
J. M. Greene ◽  
H. Johannesson ◽  
B. Schaub ◽  
H. Suhl
Keyword(s):  
Critical Transition ◽  
Incommensurate Structure ◽  
Scaling Anomaly

El Museo Universal (1857-69): Mirror of Transition Years

PMLA ◽  
1955 ◽  
Vol 70 (3) ◽  
pp. 350-374
Author(s):  
John E. Englekirk
Keyword(s):  
19Th Century ◽  
Spanish Literature ◽  
Critical Transition ◽  
Partial Coverage ◽  
Partial Analysis ◽  
Literary Journals ◽  
The 19Th Century

Students of Spanish literature of the first half of the 19th century still stand indebted to Georges Lc Centil for his partial analysis of and index to thirty-one literary journals published in :Madrid between 1803 and 1849. More recently additional light has been thrown on this period through the publication of complete indices for a number of reviews not covered by Le Gentil as well as for several included in his survey. Thus far, however, there has been no planned approach to duplicate the above efforts for the critical transition years, roughly 1850–70, from the decline of romanticism to the triumph of realism. The CSIC series to clate includes only two reviews that afford but partial coverage for these years: the above-cited Semanario pintoresco espanol (1836-57) and Educación pintoresca (1857-59). The latter, moreover, is of scant literary significance.

scholarly journals The first year on haemodialysis: a critical transition

2015 ◽  
Vol 8 (3) ◽  
pp. 271-277 ◽  
Author(s):  
Natascha J.H. Broers ◽  
Anne C.M. Cuijpers ◽  
Frank M. van der Sande ◽  
Karel M.L. Leunissen ◽  
Jeroen P. Kooman
Keyword(s):  
First Year ◽  
Critical Transition

Correlation between oxygen excess density and critical transition temperature in superconducting Bi-2201, Bi-2212 and Bi-2223

2008 ◽  
Vol 63 (11-12) ◽  
pp. 1372-1375 ◽  
Author(s):  
H.P. Roeser ◽  
F. Hetfleisch ◽  
F.M. Huber ◽  
M.F. von Schoenermark ◽  
M. Stepper ◽  
...  
Keyword(s):  
Transition Temperature ◽  
Critical Transition ◽  
Critical Transition Temperature ◽  
Excess Density ◽  
Oxygen Excess

Critical current density and microstructure variations in YBa2Cu3O7−x + BaSnO3 films with different concentrations of BaSnO3

2008 ◽  
Vol 23 (12) ◽  
pp. 3363-3369 ◽  
Author(s):  
C.V. Varanasi ◽  
J. Burke ◽  
L. Brunke ◽  
H. Wang ◽  
J.H. Lee ◽  
...  
Keyword(s):  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Gradual Increase ◽  
Critical Transition ◽  
Critical Transition Temperature ◽  
Transmission Electron ◽  
Order Of Magnitude ◽  
High Fields ◽  
Magnitude Increase

Previous work on YBa2Cu3O7−x (YBCO) + BaSnO3 (BSO) films with a single composition showed significant critical current density (Jc) improvements at higher fields but lowered Jc in low fields. A detailed study on BSO concentrations provided here demonstrates that significant Jc enhancement can occur even up to 20 mol% BSO inclusion, where typical particulate inclusions in these concentrations degrade the YBCO performance. YBCO + BSO films were processed on (100) LaAlO3 substrates using premixed targets of YBa2Cu3O7-x (YBCO) with additions of 2, 4, 10, and 20 mol% BSO. The critical transition temperature Tc of the films remained high (>87 K), even with large amounts (20 mol%) of BSO. YBCO + BSO films showed a gradual increase in Jc at high fields as the amount of BSO was increased. More than an order of magnitude increase in Jc was measured in YBCO + BSO samples as compared to regular YBCO at 4 T. YBCO + 10 mol% BSO films showed overall improvement at all the field ranges while YBCO + 20 mol% BSO was better only at high fields. Transmission electron microscopy revealed the presence of ∼7–8-nm-diameter BSO nanocolumns, the density of which increased with increasing BSO content correlating well with the observed improvements in Jc.

scholarly journals Erratum: Corrigendum: Origami structures with a critical transition to bistability arising from hidden degrees of freedom

2015 ◽  
Vol 14 (5) ◽  
pp. 540-540 ◽  
Author(s):  
Jesse L. Silverberg ◽  
Jun-Hee Na ◽  
Arthur A. Evans ◽  
Bin Liu ◽  
Thomas C. Hull ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Critical Transition

Finite Element and Experimental Analysis of Edge Defects Formation during Orthogonal Cutting of SiCp/Al Composites

2012 ◽  
Vol 500 ◽  
pp. 146-151 ◽  
Author(s):  
Ning Hou ◽  
Li Zhou ◽  
Shu Tao Huang ◽  
Li Fu Xu
Keyword(s):  
Finite Element ◽  
Chip Formation ◽  
Defect Formation ◽  
Orthogonal Cutting ◽  
Cutting Speed ◽  
Rake Angle ◽  
Critical Transition ◽  
Cutting Depth ◽  
Edge Defect ◽  
Edge Defects

In this paper, a finite element method was used to dynamically simulate the process of the edge defects formation during orthogonal cutting SiCp/Al composites. The influence of the cutting speed, cutting depth and rake angle of the PCD insert on the size of the edge defects have been investigated by using scanning electron. According to the simulated results, it can be provided that the cutting layer material has an effect on transfer stress and hinder the chip formation in the critical transition stage, and the critical transition point and distance are defined in this stage. The negative shear phenomenon is found when the chip transit to the edge defects in the flexure deformation stage, so the process of the chip formation is the basis of the edge defects formation. In addition, the relationship between the nucleation and propagation direction of the crack and the variation of the edge defect shape on the workpiece was investigated by theory, and it found that the negative shear angle formation is the primary cause of the edge defect formation. A mixed mode crack is found in the crack propagation stage. The sizes of edge defects were measured by the experiment and simulation, and the edge defect size decrease with the increasing of tool rake angle, while increase with increasing cutting depth and cutting speed.

Sign in / Sign up

Export Citation Format

Share Document