scholarly journals Mineralogical composition of atmospheric dust in Pilsen studied by X-ray powder diffraction

2012 ◽  
Vol 68 (a1) ◽  
pp. s191-s191
Author(s):  
D. Havlicek ◽  
J. Plocek ◽  
M. Klan
2006 ◽  
Vol 510-511 ◽  
pp. 622-625
Author(s):  
Woo Teck Kwon ◽  
Young Phil Kim ◽  
Y. Kim ◽  
Soo Ryong Kim ◽  
Seong Youl Bae

This paper investigates the effect of the pair-minerializer (CaSO4,-CaF2) on the reaction of alite, belite and calcium langbeinite formation with different alkali and sulfate contents. A set of clinker samples was prepared by adding laboratory grade reagents of (NH4)2SO4, CaF2 and K2CO3 to the cement raw mixes. The mineralogical composition of clinker was analyzed by X-ray powder diffraction, and the quantity of minerals was evaluated by using TOPAS software. As the experimental results, the total amount of calcium silicate minerals was rapidly increased with the addition of F and SO3 components simultaneously as pair-mineralizer with K2O more than the value which mineralizer was added separately. Also, in the case of adding K2O only to the raw mixes, the amount of alite is decreased after clinkering. However, if alkali (K2O) and pair-minerializer (CaSO4,-CaF2) were added simultaneously, the quantity of alite and calcium langbeinite mineral increased because of the formation of stable clinker minerals by the reaction of alkali (K2O) and sulfate.


2018 ◽  
Vol 33 (4) ◽  
pp. 270-278
Author(s):  
Giovanni Cavallo ◽  
Maria Luisa Vázquez de Ágredos Pascual

The pharmacy (spezieria) Santa Maria della Scala was founded in Rome by the Discalced Carmelites Order in the 17th century, and during the 18th and 19th centuries it became the official supplier of medicines for Vatican Popes. The laboratory and the cases of this spezieria still preserve glass jars with organic and inorganic materials, which were presumably used for medicine and artistic material preparation, whose composition is unknown to date. A research project was initiated with the aim to study the stored materials and the role that the pharmacy played in regional, national and international contexts. In this manuscript, the compounds were analysed through X-ray powder diffraction with the scope to derive the quantitative mineralogical composition of the inorganic fraction, their possible use in pharmacopoeias and as mineral pigments. Most of the analysed samples are salts (sulphates, chlorides, carbonates, phosphates, borates, sulphides), sulphates being the predominant class; oxides were also detected.


2015 ◽  
Vol 725-726 ◽  
pp. 578-583 ◽  
Author(s):  
Irina Ivanova ◽  
Andrey Pustovgar ◽  
Aleksey Eremin ◽  
Aleksey Adamtsevich

The aim of the present research was to determine special features of hydration process of two commercial microfine cements compared to CEM I 42.5N cement with similar mineralogical composition. The influence of cement fineness and composition on the hydration process was investigated by isothermal calorimetry of cement pastes and quantitative X-ray powder diffraction of hydration products at 1, 3, 7, 14 and 28 days.


2020 ◽  
Vol 235 (11) ◽  
pp. 559-568
Author(s):  
Ulrich Bismayer ◽  
Sutham Srilomsak ◽  
Yaowapa Treekamol ◽  
Waraporn Tanthanuch ◽  
Kanokwalee Suriyatham

AbstractBan Chiang () is an extensively studied archeological site in Northeast Thailand, Udon Thani Province, which became a UNESCO world heritage in 1992. Depending on their production period ceramic artefacts show characteristic patterns at the surface which may be interpreted as iconographic motifs for the site. Two ceramic samples, excavated in 2003, from different periods were re-investigated, previously studied by Tanthanuch W., Pattanasiriwisawa W., Somphon W., Srilomsak S. Synchrotron studies of Ban Chiang ancient pottery. Suranaree J. Sci Technol. 2011, 18, 15–28 who focussed on thermal firing and redox-conditions. Shards selected for this study were sample 5412-S6E15 dated from Bronze Age (ca. 1000–300 BC) with yellow-brown, paint-free surface and a younger sample 8027 from Iron Age (ca. 300 BC–200 AD) with red painted design carrying pictorial patterns typical for the Ban Chiang ceramics. The surface material and colour of both shards was studied in detail using optical reflectance, FTIR spectroscopy and X-ray powder diffraction. Thin sections were used to determine the thickness of the red paint and the elemental composition of the surface using an electron microprobe. Chemical composition of sample 5412-S6E15 consists as oxides of elements mainly of SiO2 and Al2O3 (representing ca. 59 and 20 wt. %) and that of the red colour of the youngest sample 8027 consists mainly of SiO2, Al2O3 and Fe2O3 (representing ca. 52, 13 and 13 wt. %), the average composition adjacent to the red painted area has ca. 72 wt. % SiO2, ca. 10 wt. % Al2O3 and only 2 wt. % Fe2O3. X-ray powder diffraction, FTIR spectroscopy and optical reflectance measurements confirm hematite in the mineralogical composition of the red pigment of shard 8027.


2002 ◽  
Vol 66 (1) ◽  
pp. 189-200 ◽  
Author(s):  
P. F. Schofield ◽  
K. S. Knight ◽  
S. J. Covey-Crump ◽  
G. Cressey ◽  
I. C. Stretton

AbstractThe volume proportions of the mineral phases in two strongly deformed olivine-orthopyroxene rocks have been quantified by whole-pattern stripping of fixed geometry X-ray powder diffraction data. The results were compared with the phase proportions as determined by Rietveld refinement of time-of-flight neutron powder diffraction data, and were shown to be in excellent agreement. The X-ray technique not only provides a very rapid and cost-effective method of determining phase proportions, but it also circumvents several of the problems associated with obtaining this information by image analysis. Moreover, the technique is particularly advantageous in strongly textured rocks or in rocks that contain significant residual strains. As such it offers a powerful technique for analysing the mineralogical composition of fine-grained and/or deformed experimental run products, which makes it of considerable potential for monitoringin situthe progress of mineral reactions during laboratory experiments.


2007 ◽  
Vol 2007 (suppl_26) ◽  
pp. 61-66 ◽  
Author(s):  
B. Peplinski ◽  
B. Adamczyk ◽  
G. Kley ◽  
K. Adam ◽  
F. Emmerling ◽  
...  

2013 ◽  
Vol 12 (10) ◽  
pp. 719-726
Author(s):  
R. Ayadi ◽  
Mohamed Boujelbene ◽  
T. Mhiri

The present paper is interested in the study of compounds from the apatite family with the general formula Ca10 (PO4)6A2. It particularly brings to light the exploitation of the distinctive stereochemistries of two Ca positions in apatite. In fact, Gd-Bearing oxyapatiteCa8 Gd2 (PO4)6O2 has been synthesized by solid state reaction and characterized by X-ray powder diffraction. The site occupancies of substituents is0.3333 in Gd and 0.3333 for Ca in the Ca(1) position and 0. 5 for Gd in the Ca (2) position.  Besides, the observed frequencies in the Raman and infrared spectra were explained and discussed on the basis of unit-cell group analyses.


2020 ◽  
Author(s):  
Luzia S. Germann ◽  
Sebastian T. Emmerling ◽  
Manuel Wilke ◽  
Robert E. Dinnebier ◽  
Mariarosa Moneghini ◽  
...  

Time-resolved mechanochemical cocrystallisation studies have so-far focused solely on neat and liquid-assisted grinding. Here, we report the monitoring of polymer-assisted grinding reactions using <i>in situ</i> X-ray powder diffraction, revealing that reaction rate is almost double compared to neat grinding and independent of the molecular weight and amount of used polymer additives.<br>


Sign in / Sign up

Export Citation Format

Share Document