Hybrid nanofluid flow and heat transfer over a nonlinear permeable stretching/shrinking surface

2019 ◽  
Vol 29 (9) ◽  
pp. 3110-3127 ◽  
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Local Nusselt Number ◽  
Skin Friction Coefficient ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

PurposeThis paper aims to investigate the steady flow and heat transfer of a Cu-Al2O3/water hybrid nanofluid over a nonlinear permeable stretching/shrinking surface with radiation effects. The surface velocity condition is assumed to be of the power-law form with an exponent of 1/3. The governing equations of the problem are converted into a system of similarity equations by using a similarity transformation.Design/methodology/approachThe problem is solved numerically using the boundary value problem solver (bvp4c) in Matlab software. The results of the skin friction coefficient and the local Nusselt number as well as the velocity and temperature profiles are presented through graphs and tables for several values of the parameters. The effects of these parameters on the flow and heat transfer characteristics are examined and discussed.FindingsResults found that dual solutions exist for a certain range of the stretching/shrinking and suction parameters. The increment of the skin friction coefficient and reduction of the local Nusselt number on the shrinking sheet is observed with the increasing of copper (Cu) nanoparticle volume fractions for the upper branch. The skin friction coefficient and the local Nusselt number increase when suction parameter is increased for the upper branch. Meanwhile, the temperature increases in the presence of the radiation parameter for both branches.Originality/valueThe problem of Cu-Al2O3/water hybrid nanofluid flow and heat transfer over a nonlinear permeable stretching/shrinking surface with radiation effects is the important originality of the present study where the dual solutions for the flow reversals are obtained.

MHD hybrid nanofluid flow over a permeable stretching/shrinking sheet with thermal radiation effect

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ubaidullah Yashkun ◽  
Khairy Zaimi ◽  
Nor Ashikin Abu Bakar ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Thermal Radiation ◽  
Radiation Effects ◽  
Skin Friction Coefficient ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This study aims to investigate the heat transfer characteristic of the magnetohydrodynamic (MHD) hybrid nanofluid over the linear stretching and shrinking surface in the presence of suction and thermal radiation effects. Design/methodology/approach Mathematical equations are transformed into pairs of self-similarity equations using similarity transformation. Boundary value problem solver (bvp4c) in MATLAB was adopted to solve the system of reduced similarity equations. In this study, the authors particularly examine the flow and heat transfer properties for different values of suction and thermal radiation parameters using single-phase nanofluid model. A comparison of the present results shows a good agreement with the published results. Findings It is noticed that the efficiency of heat transfer of hybrid nanofluid (Cu-Al2O3/H2O) is greater than the nanofluid (Cu/H2O). Furthermore, it is also found that dual solutions exist for a specific range of the stretching/shrinking parameter with different values of suction and radiation parameters. The results indicate that the skin friction coefficient and the local Nusselt number increase with suction effect. The values of the skin friction coefficient increases, but the local Nusselt number decreases for the first solution with the increasing of thermal radiation parameter. It is also observed that suction and thermal radiation widen the range of the stretching/shrinking parameter for which the solution exists. Practical implications In practice, the investigation on the flow and heat transfer of MHD hybrid nanofluid through a stretching/shrinking sheet with suction and thermal radiation effects is very important and useful. The problems related to hybrid nanofluid has numerous real-life and industrial applications, for example microfluidics, manufacturing, transportation, military and biomedical, etc. Originality/value In specific, this study focused on increasing thermal conductivity using a hybrid nanofluid mathematical model. This paper is able to obtain the dual solutions. To the best of author’s knowledge, this study is new and there is no previous published work similar to present study.

scholarly journals Three-Dimensional Flow and Heat Transfer Past a Permeable Exponentially Stretching/Shrinking Sheet in a Nanofluid

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Syahira Mansur ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Local Nusselt Number ◽  
Three Dimensional ◽  
Lewis Number ◽  
Skin Friction Coefficient ◽  
Shrinking Sheet ◽  
Three Dimensional Flow ◽  
Flow And Heat Transfer

The three-dimensional flow and heat transfer of a nanofluid over a stretching/shrinking sheet is investigated. Numerical results are obtained using bvp4c in MATLAB. The results show nonunique solutions for the shrinking case. The effects of the stretching/shrinking parameter, suction parameter, Brownian motion parameter, thermophoresis parameter, and Lewis number on the local skin friction coefficient and the local Nusselt number are studied. Suction increases the solution domain. Furthermore, as the sheet is shrunk in thex-direction, suction increases the skin friction coefficient in the same direction while decreasing the skin friction coefficient in they-direction. The local Nusselt number is consistently lower for higher values of thermophoresis parameter and Lewis number. On the other hand, the local Nusselt number increases as the Brownian motion parameter increases.

scholarly journals Magnetohydrodynamic Flow and Heat Transfer Over an Exponentially Stretching/Shrinking Sheet in Ferrofluids

2021 ◽  
Vol 29 (3) ◽  
Author(s):  
Nurfazila Rasli ◽  
Norshafira Ramli
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Differential Equations ◽  
Skin Friction ◽  
Skin Friction Coefficient ◽  
Magnetohydrodynamic Flow ◽  
Shrinking Sheet ◽  
Flow And Heat Transfer ◽  
Exponentially Stretching

In this research, the problem of magnetohydrodynamic flow and heat transfer over an exponentially stretching/shrinking sheet in ferrofluids is presented. The governing partial differential equations are transformed into nonlinear ordinary differential equations by applying suitable similarity transformations. These equations are then solved numerically using the shooting method for some pertinent parameters. For this research, the water-based ferrofluid is considered with three types of ferroparticles: magnetite, cobalt ferrite, and manganese-zinc ferrite. The numerical solutions on the skin friction coefficient, Nusselt number, velocity and temperature profiles influenced by the magnetic parameter, wall mass transfer parameter, stretching/shrinking parameter, and volume fraction of solid ferroparticle are graphically displayed and discussed in more details. The existences of dual solutions are noticeable for the stretching/shrinking case in a specific range of limit. For the first solution, an increasing number in magnetic and suction will also give an increment of skin friction coefficient and Nusselt number over stretching/shrinking sheet. For the skin friction coefficient only, it is showed a decreasing pattern after the intersection. Besides, the presence of ferroparticles in the fluids causes a high number of the fluid’s thermal conductivity and heat transfer rate.

Exploration of flow and heat transfer of non-Newtonian nanofluid over a stretching sheet by considering slip factor

2019 ◽  
Vol 30 (4) ◽  
pp. 1991-2001 ◽  
Author(s):  
K. Ganesh Kumar
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Nusselt Number ◽  
Brownian Motion ◽  
Friction Coefficient ◽  
Stretching Sheet ◽  
Skin Friction Coefficient ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Brownian Motion Parameter

Purpose Here, the present paper characteristics flow and heat transfer of non-Newtonian nanofluid over a stretching sheet. Energy expression is modeled subject to slip factor phenomenon. Consideration of chemical reaction characterizes the mass transfer mechanism. Design/methodology/approach The use of transformation variables reduces the PDEs into non-linear ODEs. The obtained nonlinear complex problems are computed numerically through RKF-45 technique. The effects of the different physical parameters on the temperature and concentration distribution are analyzed. Findings The nature of the reduced Nusselt number, reduced Sherwood number and skin friction coefficient also described as a function of different parameters arising in the problem. It is found that the rate of mass transfer enhances for enhancing values Brownian motion parameter and thermophoresis parameter. Originality/value The nature of the reduced Nusselt number, reduced Sherwood number and skin friction coefficient also described as a function of different parameters arising in the problem. It is found that, the rate of mass transfer enhances for enhancing values Brownian motion parameter and thermophoresis parameter.

Homotopy analysis method for unsteady mixed convective stagnation-point flow of a nanofluid using Tiwari-Das nanofluid model

2016 ◽  
Vol 26 (1) ◽  
pp. 40-62 ◽  
Author(s):  
Saeed Dinarvand ◽  
Reza Hosseini ◽  
Ioan Pop
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Mixed Convection ◽  
Skin Friction ◽  
Local Nusselt Number ◽  
Magnetic Parameter ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Nanoparticle Volume Fraction ◽  
Content Type

Purpose – The current study is mainly motivated by the need to the development of the transient MHD mixed convection stagnation-point flow and heat transfer of an electrically conducting nanofluid over a vertical permeable stretching/shrinking sheet by means of Tiwari-Das nanofluid model. The purpose of this paper is to investigate the effects of the parameters governing the flow i.e. the nanoparticle volume fraction, the unsteadiness parameter, the magnetic parameter, the wall transpiration parameter, the mixed convection parameter and the velocity ratio parameter on dimensionless velocity and temperature distributions, skin friction coefficient and local Nusselt number. Design/methodology/approach – The mathematical model has been formulated based on Tiwari-Das nanofluid model. Three different types of water-based nanofluid with copper, aluminum oxide (alumina) and titanium dioxide (titania) as nanoparticles are considered in this investigation. Using appropriate similarity variables, the governing equations are transformed into nonlinear ordinary differential equations in the dimensionless stream function, which is solved analytically by the well-know homotopy analysis method. The present simulations agree closely with the previous studies in the especial cases. Findings – The results show that by increasing the nanoparticle volume fraction, the unsteadiness parameter, the magnetic parameter, the wall transpiration parameter, the mixed convection parameter or reducing the velocity ratio parameter, the skin friction coefficient enhances. Furthermore, the local Nusselt number enhances with different rates by increasing the nanoparticle volume fraction, the unsteadiness parameter, the magnetic parameter, the wall transpiration parameter, the mixed convection parameter and the velocity ratio parameter. Besides, the skin friction coefficient and the local Nusselt number are highest for copper-water nanofluid compared to the alumina-water and titania-water nanofluids. Originality/value – Tiwari-Das nanofluid model has not been applied for the flow with these characteristics as mentioned in the paper. A comprehensive survey on boundary layer behavior has been presented. There are few studies regarding as analysis on thermal and hydrodynamics boundary layer. All plots presented in the paper are new and did not report in any other study. The effects of the parameters governing the flow on skin friction coefficient and local Nusselt number have been illustrated in the paper while there are some conflicts with previous published article that have been interpreted in details in the paper.

scholarly journals Turbulent flow and heat transfer characteristics in U-tubes: A numerical study

2009 ◽  
Vol 13 (4) ◽  
pp. 175-181 ◽  
Author(s):  
Khalid Alammar
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Turbulent Flow ◽  
Skin Friction ◽  
Skin Friction Coefficient ◽  
Heat Transfer Characteristics ◽  
Local Skin ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

Using the standard k-e model, 3-dimensional turbulent flow and heat transfer characteristics in U-tubes are investigated. Uncertainty is approximated using experimental correlations and grid independence study. Increasing the Dean number is shown to intensify a secondary flow within the curved section. The overall Nusselt number for the tube is found to decrease substantially relative to straight tubes, while the overall skin friction coefficient remains practically unaffected. Local skin friction coefficient, Nusselt number, and wall temperature along the tube wall are presented.

scholarly journals Hybrid Nanofluid Flow and Heat Transfer Past an Inclined Surface

Mathematics ◽  
2021 ◽  
Vol 9 (24) ◽  
pp. 3176
Author(s):  
Sumayyah Alabdulhadi ◽  
Iskandar Waini ◽  
Sameh E. Ahmed ◽  
Anuar Ishak
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Skin Friction Coefficient ◽  
Dual Solutions ◽  
Hybrid Nanoparticles ◽  
Hybrid Nanofluid ◽  
Flow And Heat Transfer

This paper examines the hybrid nanoparticles and the magnetic field impacts on the mixed convection boundary layer flow and heat transfer caused by an inclined shrinking–stretching surface in a hybrid nanofluid. Silver (Ag) is added into a MgO–water nanofluid to form Ag-MgO–water hybrid nanofluid. By making use of proper similarity transformations, the governing equations are transformed to ordinary differential equations. The problem is numerically solved with the help of the MATLAB function bvp4c. The influences of the chosen parameters on the temperature, velocity, heat transfer rate and the skin friction coefficient are addressed and graphically illustrated. The results show that increasing the magnetic parameter substantially improves the heat transfer rate and increases the skin friction coefficient. The findings also suggest that increasing the nanoparticle volume fraction φ2 (Ag) improves the skin friction coefficient while decreasing the heat transfer rate. For both stretching and shrinking instances, non-unique (dual) solutions are discovered. Only the first solution is stable, according to the temporal stability analysis of the dual solutions.

Nanofluid flow past an impulsively started vertical plate with variable surface temperature

2016 ◽  
Vol 26 (1) ◽  
pp. 328-347 ◽  
Author(s):  
Rajesh Vemula ◽  
A J Chamkha ◽  
Mallesh M. P.
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Vertical Plate ◽  
Aluminium Oxide ◽  
Skin Friction Coefficient ◽  
Viscous Drag ◽  
Content Type ◽  
Variable Surface ◽  
Variable Surface Temperature

Purpose – The purpose of this paper is to focus on the numerical modelling of transient natural convection flow of an incompressible viscous nanofluid past an impulsively started semi-infinite vertical plate with variable surface temperature. Design/methodology/approach – The problem is governed by the coupled non-linear partial differential equations with appropriate boundary conditions. A robust, well-tested, Crank-Nicolson type of implicit finite-difference method, which is unconditionally stable and convergent, is used to solve the governing non-linear set of partial differential equations. Findings – The local and average values of the skin-friction coefficient (viscous drag) and the average Nusselt number (the rate of heat transfer) decreased, while the local Nusselt number increased for all nanofluids, namely, aluminium oxide-water, copper-water, titanium oxide-water and silver-water with an increase in the temperature exponent m. Selecting aluminium oxide as the dispersing nanoparticles leads to the maximum average Nusselt number (the rate of heat transfer), while choosing silver as the dispersing nanoparticles leads to the minimum local Nusselt number compared to the other nanofluids for all values of the temperature exponent m. Also, choosing silver as the dispersing nanoparticles leads to the minimum skin-friction coefficient (viscous drag), while selecting aluminium oxide as the dispersing nanoparticles leads to the maximum skin-friction coefficient (viscous drag) for all values of the temperature exponent m. Research limitations/implications – The Brinkman model for dynamic viscosity and Maxwell-Garnett model for thermal conductivity are employed. The governing boundary layer equations are written according to The Tiwari-Das nanofluid model. A range of nanofluids containing nanoparticles of aluminium oxide, copper, titanium oxide and silver with nanoparticle volume fraction range less than or equal to 0.04 are considered. Practical implications – The present simulations are relevant to nanomaterials thermal flow processing in the chemical engineering and metallurgy industries. This study also provides an important benchmark for further simulations of nanofluid dynamic transport phenomena of relevance to materials processing, with alternative computational algorithms (e.g. finite element methods). Originality/value – This paper is relatively original and illustrates the influence of variable surface temperature on transient natural convection flow of a viscous incompressible nanofluid and heat transfer from an impulsively started semi-infinite vertical plate.

Hall Effects on Unsteady Magnetohydrodynamic Flow of a Nanofluid Past an Oscillatory Vertical Rotating Flat Plate Embedded in Porous Media

2021 ◽  
Vol 10 (2) ◽  
pp. 259-269
Author(s):  
M. Veera Krishna ◽  
N. Ameer Ahamad ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Local Nusselt Number ◽  
Hall Current ◽  
Skin Friction Coefficient ◽  
Engineering Industry ◽  
Hall Effects ◽  
The Impact

In the current investigative paper, the impact of Hall current on an unsteady magnetohydrodynamic liberated convection revolving flow of a nanofluid restricted with a uniform absorbent medium over an oscillatory moving vertical smooth plate with convective as well as diffusive frontier conditions has been reviewed. The non-dimensionalized governing differential equations by the appropriate frontier conditions are resolved by the perturbations technique. The impacts of the physical constants on the flow as well as the heat transfer features are displayed graphically and analyzed for Cu as well as Al2O3 nanoparticles. For the engineering industry, the skin friction coefficient, local Nusselt number, along with the Sherwood’s number are examined numerically in detail.

scholarly journals Magnetohydrodynamic Flow and Heat Transfer Induced by a Shrinking Sheet

Mathematics ◽  
2020 ◽  
Vol 8 (7) ◽  
pp. 1175
Author(s):  
Nor Ain Azeany Mohd Nasir ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Differential Equations ◽  
Prandtl Number ◽  
Heat Generation ◽  
Local Nusselt Number ◽  
Magnetic Parameter ◽  
Skin Friction Coefficient ◽  
Shrinking Sheet ◽  
Flow And Heat Transfer

The magnetohydrodynamic (MHD) stagnation point flow over a shrinking or stretching flat sheet is investigated. The governing partial differential equations (PDEs) are reduced into a set of ordinary differential equations (ODEs) by a similarity transformation and are solved numerically with the help of MATLAB software. The numerical results obtained are for different values of the magnetic parameter M, heat generation parameter Q, Prandtl number Pr and reciprocal of magnetic Prandtl number ε. The influences of these parameters on the flow and heat transfer characteristics are investigated and shown in tables and graphs. Two solutions are found for a certain rate of the shrinking strength. The stability of the solutions in the long run is determined, and shows that only one of them is stable. It is found that the skin friction coefficient f ″ ( 0 ) and the local Nusselt number − θ ′ ( 0 ) decrease as the magnetic parameter M increases. Further, the local Nusselt number increases as the heat generation increases.

Sign in / Sign up

Export Citation Format

Share Document