Research on the simplified vehicle window buffeting noise with a modified LRN CLES model using a transition-code based method

2019 ◽  
Vol 29 (9) ◽  
pp. 3169-3191
Author(s):  
Zhen Chen ◽  
Zhengqi Gu ◽  
Zhonggang Wang
Keyword(s):  
Turbulence Models ◽  
Reynolds Numbers ◽  
Total Stress ◽  
Content Type ◽  
Eddy Simulation ◽  
Turbulent Transition ◽  
Vehicle Aerodynamics ◽  
Experimental Validations ◽  
Noise Signature ◽  
Laminar Turbulent Transition

Purpose This paper aims to propose a precise turbulence model for vehicle aerodynamics, especially for vehicle window buffeting noise. Design/methodology/approach Aiming at the fact that commonly used turbulence models cannot precisely predict laminar-turbulent transition, a transition-code-based improvement is introduced. This improvement includes the introduction of total stress limitation (TSL) and separation-sensitive model. They are integrated into low Reynolds number (LRN) k-ε model to concern transport properties of total stress and precisely capture boundary layer separations. As a result, the ability of LRN k-ε model to predict the transition is improved. Combined with the constructing scheme of constrained large-eddy simulation (CLES) model, a modified LRN CLES model is achieved. Several typical flows and relevant experimental results are introduced to validate this model. Finally, the modified LRN CLES model is used to acquire detailed flow structures and noise signature of a simplified vehicle window. Then, experimental validations are conducted. Findings Current results indicate that the modified LRN CLES model is capable of achieving acceptable accuracy in prediction of various types of transition at various Reynolds numbers. And, the ability of this model to simulate the vehicle window buffeting noise is greater than commonly used models. Originality/value Based on the TSL idea and separation-sensitive model, a modified LRN CLES model concerning the laminar-turbulent transition for the vehicle window buffeting noise is first proposed.

On the Effects of Turbulence Modeling on the Fluid-Structure Interaction of a Rigid Cylinder

2016 ◽  
Author(s):  
Guilherme Feitosa Rosetti ◽  
Guilherme Vaz ◽  
André Luís Condino Fujarra
Keyword(s):  
Turbulence Modeling ◽  
Three Dimensional ◽  
Turbulence Models ◽  
Reynolds Numbers ◽  
Boundary Layer Separation ◽  
Turbulent Transition ◽  
Moving Cylinder ◽  
Wide Range ◽  
Cylinder Flow ◽  
Laminar Turbulent Transition

The cylinder flow is a canonical problem for Computational Fluid Dynamics (CFD), as it can display several of the most relevant issues for a wide class of flows, such as boundary layer separation, vortex shedding, flow instabilities, laminar-turbulent transition and others. Several applications also display these features justifying the amount of energy invested in studying this problem in a wide range of Reynolds numbers. The Unsteady Reynolds Averaged Navier Stokes (URANS) equations combined with simplifying assumptions for turbulence have been shown inappropriate for the captive cylinder flow in an important range of Reynolds numbers. For that reason, recent improvements in turbulence modeling has been one of the most important lines of research within that issue, aiming at better prediction of flow and loads, mainly targeting the three-dimensional effects and laminar-turbulent transition, which are so important for blunt bodies. In contrast, a much smaller amount of work is observed concerning the investigation of turbulent effects when the cylinder moves with driven or free motions. Evidently, larger understanding of the contribution of turbulence in those situations can lead to more precise mathematical and numerical modeling of the flow around a moving cylinder. In this paper, we present CFD calculations in a range of moderate Reynolds numbers with different turbulence models and considering a cylinder in captive condition, in driven and in free motions. The results corroborate an intuitive notion that the inertial effects indeed play very important role in determining loads and motions. The flow also seems to adapt to the motions in such a way that vortices are more correlated and less influenced by turbulence effects. Due to good comparison of the numerical and experimental results for the moving-cylinder cases, it is observed that the choice of turbulence model for driven and free motions calculations is markedly less decisive than for the captive cylinder case.

PIV validation of different turbulence models used for numerical simulation of a centrifugal pump diffuser

2018 ◽  
Vol 35 (1) ◽  
pp. 2-17 ◽  
Author(s):  
Ling Zhou ◽  
Ling Bai ◽  
Wei Li ◽  
Weidong Shi ◽  
Chuan Wang
Keyword(s):  
Numerical Simulation ◽  
Centrifugal Pump ◽  
Turbulence Models ◽  
Detached Eddy Simulation ◽  
Piv Measurements ◽  
Content Type ◽  
Rotating Speed ◽  
Eddy Simulation ◽  
Image Velocimetry ◽  
Velocity Flow

Purpose The purpose of this study is to validate the different turbulence models using in the numerical simulation of centrifugal pump diffuser. Computational fluid dynamics (CFD) has become the main method to study the pump inner flow patterns. It is important to understand the differences and features of the different turbulence models used in turbomachinery. Design/methodology/approach The velocity flow fields in a compact return diffuser under different flow conditions are studied and compared between CFD and particle image velocimetry (PIV) measurements. Three turbulence models are used to solve the steady flow field using high-quality fine structured grids, including shear stress transport (SST) k-w model, detached-eddy simulation (DES) model and SST k-w model with low-Re corrections. Findings SST k-w model with low-Re correction gives better results compared to DES and SST k-w model, and gives a good predication about the vortex core position under strong part-loading conditions. Originality/value A special test rig is designed to carry out the 2D PIV measurements under high rotating speed of 2850 r/min, and the PIV results are used to validate the CFD results.

Detached-Eddy Simulations and Reynolds-Averaged Navier-Stokes Simulations of Delta Wing Vortical Flowfields

2002 ◽  
Vol 124 (4) ◽  
pp. 924-932 ◽  
Author(s):  
Scott Morton ◽  
James Forsythe ◽  
Anthony Mitchell ◽  
David Hajek
Keyword(s):  
Vortex Breakdown ◽  
Delta Wing ◽  
Turbulence Models ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Fighter Aircraft ◽  
Eddy Simulation ◽  
Reynolds Averaged Navier Stokes ◽  
High Reynolds

An understanding of vortical structures and vortex breakdown is essential for the development of highly maneuverable vehicles and high angle of attack flight. This is primarily due to the physical limits these phenomena impose on aircraft and missiles at extreme flight conditions. Demands for more maneuverable air vehicles have pushed the limits of current CFD methods in the high Reynolds number regime. Simulation methods must be able to accurately describe the unsteady, vortical flowfields associated with fighter aircraft at Reynolds numbers more representative of full-scale vehicles. It is the goal of this paper to demonstrate the ability of detached-eddy Simulation (DES), a hybrid Reynolds-averaged Navier-Stokes (RANS)/large-eddy Simulation (LES) method, to accurately predict vortex breakdown at Reynolds numbers above 1×106. Detailed experiments performed at Onera are used to compare simulations utilizing both RANS and DES turbulence models.

Vortex-Induced Motion of a Square Cylinder at Moderate Reynolds Numbers

2016 ◽  
Author(s):  
Chih-Hua Wu ◽  
Shengwei Ma ◽  
Chang-Wei Kang ◽  
Teck-Bin Arthur Lim ◽  
Rajeev Kumar Jaiman ◽  
...  
Keyword(s):  
Vortex Shedding ◽  
Bluff Body ◽  
Computational Cost ◽  
Turbulence Models ◽  
Reynolds Numbers ◽  
Spanwise Direction ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Cylinder Length ◽  
Induced Motion

Bluff body structures exposed to ocean current can undergo vortex-induced motion (VIM) for certain geometric and physical conditions. Recently, the study of VIM has been gaining attention for many engineering applications, in particular offshore structures such as buoys, FPSOs, semi-submersibles, Spars and TLPs. The present work is a part of a systematic effort to investigate the VIM response of multi-columns floating platform. In real sea condition, floating platforms are in high Reynolds numbers region and flow patterns around structures are turbulent in nature. For the purpose of investigating and simulating accurately the nonlinear dynamic processes of vortex shedding, transport and wake interactions with the bluff body, the fundamental study of VIM around a square column at moderate Reynolds numbers (1500 ≤ Re ≤ 14000) is firstly investigated. In the present work, the transient flow pattern around a free vibrating square cylinder at moderate Reynolds numbers is numerically investigated by an open source CFD toolbox, OpenFOAM. Good consistency and agreement are found between the present numerical findings and that of experiments. The cylinder, with a blockage area of 4.2%, is mounted on an elastic support for free vibration in the transverse direction. Hybrid RANS-LES turbulence models are considered here for accurate prediction of massively separated turbulent wake flow while maintaining the reasonable computational cost. Three hybrid turbulence models, the DDES (Delayed Detached Eddy Simulation, the k-ω SST-DES (Detached Eddy Simulation), and the k–ω SST-SAS (Scale Adaptive Simulation), are studied and their results are compared with the reported experimental measurements. It is shown that the result of simulation with the k–ω SST-SAS model is closer to the reported literature than the other two and therefore, subsequently adopted for all the simulations of our study in this paper. The scaling effect of cylinder length in the spanwise direction is also studied with the objective to reduce the computational cost. From the comparison with the recent experimental measurements, the discrepancy between the present simulations of reducing cylinder length and the experiment increases only when Re ≥ 4000. This might stem from the increase in wavelength of some vortex shedding modes and turbulence intensity variation in the spanwise direction near the cylinder as Re ≥ 4000. The detailed flow patterns, 3D vortex structures (based on Q-criterion) and vortex-shedding modes are presented in this work as well.

Constrained large-eddy simulation of laminar-turbulent transition in channel flow

2014 ◽  
Vol 26 (9) ◽  
pp. 095103 ◽  
Author(s):  
Yaomin Zhao ◽  
Zhenhua Xia ◽  
Yipeng Shi ◽  
Zuoli Xiao ◽  
Shiyi Chen
Keyword(s):  
Large Eddy Simulation ◽  
Channel Flow ◽  
Eddy Simulation ◽  
Turbulent Transition ◽  
Large Eddy ◽  
Laminar Turbulent Transition

scholarly journals Large-eddy simulation of laminar-turbulent transition in a swept-wing boundary layer

1997 ◽  
Author(s):  
Xiaoli Huai ◽  
Ugo Piomelli ◽  
Ronald Joslin ◽  
Xiaoli Huai ◽  
Ugo Piomelli ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Large Eddy Simulation ◽  
Swept Wing ◽  
Eddy Simulation ◽  
Turbulent Transition ◽  
Large Eddy ◽  
Laminar Turbulent Transition
Sign in / Sign up

Export Citation Format

Share Document