scholarly journals Space charge build-up in XLPE-cable with temperature gradient

2002 ◽  
Author(s):  
J.T. Holboll ◽  
M. Henriksen ◽  
J. Hjerrild
Keyword(s):  
Temperature Gradient ◽  
Space Charge ◽  
Xlpe Cable

Space charge characteristics in 160 kV DC XLPE cable under temperature gradient

2018 ◽  
Vol 25 (6) ◽  
pp. 2366-2374 ◽  
Author(s):  
Wang Xia ◽  
Chen Chi ◽  
Cheng Chuanhui ◽  
Wu Yang ◽  
Wu Kai ◽  
...  
Keyword(s):  
Temperature Gradient ◽  
Space Charge ◽  
Xlpe Cable

scholarly journals Space Charge Accumulation Characteristics in HVDC Cable under Temperature Gradient

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5571
Author(s):  
Yifan Zhou ◽  
Wei Wang ◽  
Tailong Guo
Keyword(s):  
Temperature Gradient ◽  
Space Charge ◽  
Charge Accumulation ◽  
Cable Insulation ◽  
Xlpe Cable ◽  
Conductivity Model ◽  
High Voltage Direct Current ◽  
Dc Electric Field ◽  
Higher Temperature ◽  
Bipolar Charge

One of the main issues that affect the development of high-voltage direct-current (HVDC) cable insulation is the accumulation of space charge. The load operation of an HVDC cable leads to the formation of a radially distributed temperature gradient (TG) across the insulation. In this study, the space charge accumulation in a cross-linked polyethylene (XLPE) cable is measured under a DC electric field and TG using the pulsed electro-acoustic (PEA) method, and the effect of the TG on the space charge behavior is investigated. In addition, the bipolar charge transport (BCT) model and the conductivity model based on an improved cylindrical geometry are used to simulate the charge behavior in the HVDC XLPE cable under TG, and the experimental and simulated results are compared. The results show that the higher temperature of the cable conductor promotes the accumulation of homocharge near the side of high temperature. Additionally, with the increase of the TG, not only does more heterocharge accumulates adjacent to the side of low temperature, but more space charge also extends into the bulk of the cable insulation. More attention should be paid to the conductor shield layer and the insulation shield layer in HVDC cables. Moreover, the BCT model can more accurately describe the experimental results than the conductivity model.

Field distribution in polymeric MV-HVDC model cable under temperature gradient. Simulation and space charge measurements

2014 ◽  
Vol 17 (5-6) ◽  
pp. 307-325 ◽  
Author(s):  
Thi Thu Nga Vu ◽  
Gilbert Teyssedre ◽  
Bertrand Vissouvandin ◽  
Séverine Le Roy ◽  
Christian Laurent ◽  
...  
Keyword(s):  
Temperature Gradient ◽  
Space Charge ◽  
Field Distribution

scholarly journals Space Charge and Electric Field Analysis on Contaminated XLPE Insulator

2018 ◽  
Vol 12 (1) ◽  
pp. 370
Author(s):  
M.H.A. Wahab ◽  
N. A. M. Jamail ◽  
E. Sulaiman ◽  
Q.E. Kamarudin ◽  
N.A. Othman ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Electric Field ◽  
Space Charge ◽  
Dielectric Strength ◽  
Field Analysis ◽  
Ethylene Dichloride ◽  
Xlpe Cable ◽  
Lower Dielectric Constant ◽  
High Dielectric ◽  
Xlpe Insulation

<p>Nowadays, XLPE cable has been widely used because it has better resistance than other cables. XLPE insulation has unique features including a high dielectric strength and high insulation resistance. A lot of researches based on hardware and software have been conducted to prove the effectiveness of XLPE cable such as AC and DC applications and Space Charge Distribution measurement under HVDC at High Temperature. This research focused on analysis of space charge and electric field on XLPE cable with effect of non-uniform contamination layer by using Quickfield Software. Non-uniform contaminations have been applied along XLPE cable using Arsenic Tribromide (AsBr3), Boron Bromide (BBr3), Ethylene Dichloride (CH2C1), Formic Acid (CH1O2), Formamide (CH3NO) and Alcohol element. Presence of these contamination elements represent of underground contamination. The size and layer of the contamination were non-uniform type. From the results, it is shown that lower dielectric constant of contamination will affect more on charge of XLPE insulation. As a conclusion, it can be seen lower dielectric constant value of contamination element greatly affecting the performance of XLPE insulation. Furthermore, size of contamination also influences the content of charge in contamination where the bigger the contamination size, the more charge contained in the contamination.</p>

Data recovery algorithm in space charge measurement by PEA method

2016 ◽  
Vol 35 (3) ◽  
Author(s):  
Zhengyi Han ◽  
George Chen ◽  
Junzheng Cao ◽  
Zhiyuan He ◽  
Haitian Wang ◽  
...  
Keyword(s):  
Space Charge ◽  
Design Methodology ◽  
Single Layer ◽  
Accurate Solution ◽  
Xlpe Cable ◽  
Recovery Algorithm ◽  
Charge Measurement ◽  
Solid Dielectrics ◽  
Attenuation And Dispersion ◽  
Function Matrix

Purpose The pulsed electro-acoustic (PEA) method is widely applied for space charge measurement in solid dielectrics. The signals, however, can be seriously distorted during transmission, especially in non-planar specimens. The aim of this work is to find an efficient algorithm to correctly recover the space charge profile for different types of specimens. Design/methodology/approach The distortion can be associated with both geometry and material (attenuation and dispersion). Hence the recovery algorithm consists of two parts respectively. The influences of geometries, causing the divergences of electric force and acoustic waveform, can be corrected by sets of factors. The attenuation and dispersion of the material can be suppressed based on the transfer function matrix in frequency domain, which could be obtained from calibration. Findings A general algorithm applicable to three kinds of specimens (single-layer, multi-layer and coaxial-geometry dielectrics) has been proposed. Compared with the other two algorithms in literature, the present one offers the most accurate solution while taking relatively shorter time. In addition, this algorithm is applied on signals measured from a planar LDPE sample and the results show that the new algorithm is fairly effective with excellent stability in a real system. Originality/value As one of the most accurate algorithms, the present one is theoretically one third quicker than the others. This algorithm would be helpful in applications calling for large calculations, i.e. 3-D imaging of space charge distribution in XLPE cable.

Sign in / Sign up

Export Citation Format

Share Document