Broadband Printed/Elliptical Slot Antenna for Wireless Communication using Proximity Feeding Technique

Author(s):  
Naeemullah ◽  
Sadiq Ullah ◽  
Ashfaq Ahmad ◽  
Dong You Choi
Electronics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 347 ◽  
Author(s):  
Ke Li ◽  
Tao Dong ◽  
Zhenghuan Xia

This paper presents a multiple-resonance technique that sought to achieve a wide bandwidth for printed wide-slot antennas with fork-shaped stubs. By properly appending an extra fork-shaped stub onto the main fork-shaped stub, the impedance bandwidth was able to be clearly broadened. To validate this technique, two designs where the extra stubs were added at different positions of the main stub were constructed. The measured impedance bandwidths of the proposed antennas reached 148.6% (0.9–6.1 GHz) for S11 < −10 dB, indicating a 17.9% wider bandwidth than that of the normal antenna (0.9–4.3 GHz). Moreover, a stable radiation pattern was observed within the operating frequency range. The proposed antennas were confirmed to be much-improved candidates for applications in various wireless communication systems.


2017 ◽  
Vol 9 (8) ◽  
pp. 1695-1703
Author(s):  
Haixiong Li ◽  
Yunlong Gong ◽  
Jiakai Zhang ◽  
Jun Ding ◽  
Chenjiang Guo

In this paper, a coplanar waveguide (CPW)-fed dual-band uniplanar tri-polarization reconfigurable antenna based on the PIN diode switch is proposed. The proposed antenna can be reconfigured between the linear polarization (LP) and the circular polarization (CP) mode, including both the right-handed circular polarization and left-handed circular polarization simultaneously within the dual operating bands. The central frequencies of the bands are 2.63 and 4.42 GHz, respectively, and the overlapped operating bandwidth is 17.8 and 3.40%. The proposed reconfigurable antenna is a closed-slot antenna fed by the CPW transmission line and the reconfigurable mechanism is to regulate the T-shaped driven stub through switching the PIN diodes on and off. The scattering parameters, axial ratio, radiation pattern, gain, and the radiation efficiency of the proposed antenna are all investigated in the following. The optimized antenna has been fabricated to experimental test, the simulated and the measured results agree well with each other. The lower frequency band of the proposed antenna covers the 2.40 GHz WLAN specification and the upper band can be used for the 5 G communication (4.40–4.50 GHz); therefore it is suitable to be applied in the mobile wireless communication.


ETRI Journal ◽  
2009 ◽  
Vol 31 (3) ◽  
pp. 271-281 ◽  
Author(s):  
Paitoon Rakluea ◽  
Noppin Anantrasirichai ◽  
Kanok Janchitrapongvej ◽  
Toshio Wakabayashi

2003 ◽  
Vol 36 (5) ◽  
pp. 381-385 ◽  
Author(s):  
Cuthbert M. Allen ◽  
Atef Z. Elsherbeni ◽  
Charles E. Smith ◽  
Chun-Wen P. Huang ◽  
Kai-Fong Lee

2005 ◽  
Vol 46 (3) ◽  
pp. 197-201 ◽  
Author(s):  
Hai-Ming Hsiao ◽  
Jeun-Wen Wu ◽  
Yau-Der Wang ◽  
Jui-Han Lu ◽  
Shun-Hsyung Chang

Sign in / Sign up

Export Citation Format

Share Document