Mechanical properties and electrochemical corrosion behavior of Al-Cu solder joint with Sn-Zn based solder

2011 ◽  
Author(s):  
Ning Kang ◽  
Mingliang Huang ◽  
Qiang Zhou ◽  
Haitao Ma
Keyword(s):  
Mechanical Properties ◽  
Solder Joint ◽  
Corrosion Behavior ◽  
Electrochemical Corrosion ◽  
Electrochemical Corrosion Behavior

Microstructure, Mechanical Properties and Corrosion Behavior of Mg-1Zn-0.5Ca Alloy

2011 ◽  
Vol 311-313 ◽  
pp. 1735-1740
Author(s):  
Xue Song Li ◽  
Li Dong Wang ◽  
Jian Wu Zhao ◽  
Jian Sheng Liu ◽  
Li Min Wang
Keyword(s):  
Mechanical Properties ◽  
Corrosion Behavior ◽  
Cast Alloy ◽  
Electrochemical Corrosion ◽  
Aging Treatment ◽  
Average Grain Size ◽  
Electrochemical Corrosion Behavior ◽  
Electrochemical Corrosion Resistance ◽  
Mechanical Properties And Corrosion ◽  
Precipitated Phases

Mg-1Zn-0.5Ca alloy was prepared by casting technology. The as-cast alloy was solution treated at 470°C for 24 h and aged at 175°C for 0-50 h. The microstructure, mechanical properties and electrochemical corrosion behavior of the alloys were investigated. The results showed that the average grain size of the as-cast alloy was 120-150 μm, and the precipitated phases were distributed uniformly in α-Mg grain. The as-cast alloy showed good mechanical properties. The tensile strength was 186 MPa, and ductility was 23%. A typical age softening responses was obtained during the aging treatment. In the electrochemical corrosion tests, corrosion of the alloys is improved in Hank’s solution and 3.5wt% NaCl solution after the solution and aged treatment. However, the aged treated alloys showed the better electrochemical corrosion resistance.

Sign in / Sign up

Export Citation Format

Share Document