Integral sliding mode controller for trajectory tracking control of Stewart platform manipulator

Author(s):  
Dereje Shiferaw Negash ◽  
R. Mitra
Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Jiawen Cui ◽  
Haibin Sun

The issue of fixed-time trajectory tracking control for the autonomous surface vehicles (ASVs) system with model uncertainties and external disturbances is investigated in this paper. Particularly, convergence time does not depend on initial conditions. The major contributions include the following: (1) An integral sliding mode controller (ISMC) via integral sliding mode surface is first proposed, which can ensure that the system states can follow the desired trajectory within a fixed time. (2) Unknown external disturbances are absolutely estimated by means of designing a fixed-time disturbance observer (FTDO). By combining the FTDO and ISMC techniques, a new control scheme (FTDO-ISMC) is developed, which can achieve both disturbance compensation and chattering-free condition. (3) Aiming at reconstructing the unknown nonlinear dynamics and external disturbances, a fixed-time unknown observer (FTUO) is proposed, thus providing the FTUO-ISMC scheme that finally achieves trajectory tracking of ASVs with unknown parameters. Finally, simulation tests and detailed comparisons indicate the effectiveness of the proposed control scheme.


Robotica ◽  
2016 ◽  
Vol 35 (10) ◽  
pp. 2036-2055 ◽  
Author(s):  
Ahmet Dumlu ◽  
Köksal Erentürk ◽  
Alirıza Kaleli ◽  
Kağan Koray Ayten

SUMMARYIn this paper, design, analysis and real-time trajectory tracking control of a 6-degree of freedom revolute spherical-spherical type parallel manipulator, actuated by six hybrid stepper motors, has been studied. Two different control approaches have been used to improve the trajectory tracking performance of the designed manipulator. The first approach considered a single input-single output (SISO) linear quadratic regulator (LQR) for trajectory tracking control of the manipulator. Another controller type based on a nonlinear sliding mode controller method has been utilized to take decoupled dynamic approximation model of the manipulator into account and to improve tracking performance of the manipulator. Real-time experimental results for the two different control techniques have been verified. Finally, according to the results, the nonlinear sliding mode controller method has improved the tracking performance of the designed manipulator.


Sign in / Sign up

Export Citation Format

Share Document