Preliminary Evaluation of a Performance-based Stiffness Control for Upper Limb Elbow Joints Rehabilitation

Author(s):  
Ziyi Yang ◽  
Shuxiang Guo ◽  
Yi Liu
2018 ◽  
Vol 16 (1) ◽  
Author(s):  
Montana Buntragulpoontawee ◽  
Patreeya Euawongyarti ◽  
Tinakon Wongpakaran ◽  
Stephen Ashford ◽  
Somprartthana Rattanamanee ◽  
...  

2015 ◽  
Vol 40 (3) ◽  
pp. 404-408
Author(s):  
Fan Gao ◽  
Johanan Rodriguez ◽  
Susan Kapp

Background and aim:Harness fitting in the body-powered prosthesis remains more art than science due to a lack of consistent and quantitative evaluation. The aim of this study was to develop a mechanical, human-body-shaped apparatus to simulate body-powered upper limb prosthetic usage and evaluate its capability of quantitative examination of harness configuration.Technique:The apparatus was built upon a torso of a wooden mannequin and integrated major mechanical joints to simulate terminal device operation. Sensors were used to register cable tension, cable excursion, and grip force simultaneously.Discussion:The apparatus allowed the scapula to move up to 127 mm laterally and the load cell can measure the cable tension up to 445 N. Our preliminary evaluation highlighted the needs and importance of investigating harness configurations in a systematic and controllable manner.Clinical relevance:The apparatus allows objective, systematic, and quantitative evaluation of effects of realistic harness configurations and will provide insightful and working knowledge on harness fitting in upper limb amputees using body-powered prosthesis.


2018 ◽  
Author(s):  
Daniel Freer ◽  
◽  
Konrad Leibrandt ◽  
Piyamate Wisanuvej ◽  
Jindong Liu ◽  
...  

Author(s):  
Zhenxuan Zhang ◽  
Boris I. Prilutsky ◽  
Andrew J. Butler ◽  
Minoru Shinohara ◽  
Maysam Ghovanloo

Stroke is a devastating condition that may cause upper limb paralysis. Robotic rehabilitation with self-initiated and assisted movements is a promising technology that could help restore upper limb function. Previous studies have established that the tongue motion can be used to communicate human intent and control a rehabilitation robot/assistive device. The goal of this study was to evaluate a tongue-operated exoskeleton system (TDS-KA), which we have developed for upper limb rehabilitation. We adopted a tongue-operated assistive technology, called the tongue drive system (TDS), and interfaced it with the exoskeleton KINARM. We also developed arm reaching and tracking tasks, controlled by different tongue operation modes, for training and evaluation of arm motor function. Arm reaching and tracking tasks were tested in 10 healthy participants (seven males and three females, 23–60 years) and two female stroke survivors with upper extremity impairment (32 and 58 years). All healthy and two stroke participants successfully performed the tasks. One stroke subject demonstrated a clinically significant improvement in Fugl-Meyer upper extremity score after practicing the tasks in six 3-h sessions. We conclude that the TDS-KA system can accurately translate tongue commands to exoskeleton arm movements, quantify the function of the arm, and perform rehabilitation training.


2012 ◽  
Vol 29 (1) ◽  
pp. 35-44 ◽  
Author(s):  
T.-M. Wu ◽  
D.-Z. Chen

ABSTRACTResistance training has been shown to be effective for developing musculoskeletal strength and is recommended by many major health organizations, such as the American College of Sports Medicine and the American Heart Association. This form of training is available for most populations, including adolescents, healthy adults, the elderly, and the clinical population. Resistance training equipment design relies heavily on the analysis of human movement. Dynamic models of human movement help researchers identify key forces, movements, and movement patterns that should be measured. An at-home resistance training upper limb exoskeleton has been designed with a three-degree-of-freedom shoulder joint and a one-degree-of-freedom elbow joint to allow movement of the upper limb at single and multiple joints in different planes. The exoskeleton can continuously increase the resistance as the spring length changes to train more muscle groups and to reduce the potential risk of muscle injury to the upper limb by free weights and training equipment. The objectives of this research were to develop a dynamic model of the spring-loaded upper limb exoskeleton and to evaluate this model by adopting an appropriate motion analysis system to verify our hypotheses and to determine the optimal configuration of a spring-loaded upper limb exoskeleton for further verification studies.


Sign in / Sign up

Export Citation Format

Share Document