Energy-efficient broadband data communications using white LEDs on aircraft powerlines

Author(s):  
M. Kavehrad ◽  
Z. Hajjarian ◽  
A. Enteshari
2019 ◽  
Vol 9 (4) ◽  
pp. 675 ◽  
Author(s):  
Yung-Fang Chou ◽  
Chi-Feng Chen ◽  
Shang-Ping Ying ◽  
Yun-Ying Yeh

With the development of high-efficiency and high-power LEDs, they have become the most energy-efficient and environmentally friendly artificial light source. Phosphor-converted white LEDs are currently mainstream in the market. The remote phosphor is an effective way to enhance the conversion efficiency and lifetime of phosphor-converted LEDs. For applications of high-quality lighting and LCD backlights, the uniformity of angular correlated color temperature (CCT) is very important. This report explored a remote phosphor white LED with low angular CCT variance and high luminous efficiency by using TiO2 diffuser-loaded encapsulation. Experimental results revealed that for the TiO2 diffuser-loaded encapsulation remote phosphor white LED, the angular color uniformity could be improved by 31.82% and the luminous flux by 8.65%. Moreover, the mean CCTs of the TiO2 diffuser-loaded encapsulation and non-diffuser remote phosphor white LEDs were similar at a driving current of 350 mA. Finally, we showed that incorporating the TiO2 diffuser into the phosphor layer of the remote phosphor white LEDs, does not influence the reliability of the LED.


2013 ◽  
Vol 1565 ◽  
Author(s):  
B. Hemalatha Rudramadevi ◽  
S. Buddhudu ◽  
Piyush Bhatt

ABSTRACTFor the purpose of development of highly energy-efficient light sources, one needs to design highly efficient green, red and yellow phosphors, which are able to absorb excitation energy and generate emissions. In this contribution, we present our results on producing some efficient phosphors with improved luminescence properties. The effects of zinc on the zinc-doped CaTiO3:Eu3+ phosphors have been investigated by varying the zinc concentrations. X-ray powder diffraction (XRD) and Scanning electron microscopy (SEM) characterizations were studies for their structural and morphological analysis. The variation of zinc concentration influences the crystallinity and morphology of the phosphors. The luminescence spectra of (Zn,Ca)TiO3: Eu3+ have been measured. Eu3+: (Zn,Ca)TiO3 have shown five emission transitions of 5D0→7F 0,1,2,3 & 4 located at 580 nm,593nm 615 nm,655 and 704 respectively with excitation at λexci=398nm (7F0→5L6). Moreover, the emitting phosphor developed in this study can be very effectively excited at the wavelengths of 398 nm. The (Zn, Ca)TiO3:Eu3+ can be used as a complementary phosphor in there red region for the white LEDs.


2008 ◽  
Author(s):  
Steve DenBaars ◽  
David Hafemeister ◽  
B. Levi ◽  
M. Levine ◽  
P. Schwartz

OSA Continuum ◽  
2019 ◽  
Vol 2 (8) ◽  
pp. 2460
Author(s):  
Yung-Chang Jen ◽  
Xuan-Hao Lee ◽  
Shih-Kang Lin ◽  
Ching-Cherng Sun ◽  
Chih-Shou Wu ◽  
...  

2011 ◽  
Author(s):  
B. Smitha Shekar ◽  
M. Sudhakar Pillai ◽  
G. Narendra Kumar

2020 ◽  
Vol 39 (6) ◽  
pp. 8139-8147
Author(s):  
Ranganathan Arun ◽  
Rangaswamy Balamurugan

In Wireless Sensor Networks (WSN) the energy of Sensor nodes is not certainly sufficient. In order to optimize the endurance of WSN, it is essential to minimize the utilization of energy. Head of group or Cluster Head (CH) is an eminent method to develop the endurance of WSN that aggregates the WSN with higher energy. CH for intra-cluster and inter-cluster communication becomes dependent. For complete, in WSN, the Energy level of CH extends its life of cluster. While evolving cluster algorithms, the complicated job is to identify the energy utilization amount of heterogeneous WSNs. Based on Chaotic Firefly Algorithm CH (CFACH) selection, the formulated work is named “Novel Distributed Entropy Energy-Efficient Clustering Algorithm”, in short, DEEEC for HWSNs. The formulated DEEEC Algorithm, which is a CH, has two main stages. In the first stage, the identification of temporary CHs along with its entropy value is found using the correlative measure of residual and original energy. Along with this, in the clustering algorithm, the rotating epoch and its entropy value must be predicted automatically by its sensor nodes. In the second stage, if any member in the cluster having larger residual energy, shall modify the temporary CHs in the direction of the deciding set. The target of the nodes with large energy has the probability to be CHs which is determined by the above two stages meant for CH selection. The MATLAB is required to simulate the DEEEC Algorithm. The simulated results of the formulated DEEEC Algorithm produce good results with respect to the energy and increased lifetime when it is correlated with the current traditional clustering protocols being used in the Heterogeneous WSNs.


Sign in / Sign up

Export Citation Format

Share Document