A Tool to Determine the Hydrophobicity of Insulators using Contact Angle of a Water Droplet

Author(s):  
Supun Amarathunga ◽  
Lochana Ranathunga ◽  
Prabath Lakmal ◽  
Dimuth Saranga ◽  
Rasara Samarasinghe ◽  
...  
Keyword(s):  
2019 ◽  
Vol 894 ◽  
pp. 104-111
Author(s):  
Thanh Long Le ◽  
Jyh Chen Chen ◽  
Huy Bich Nguyen

In this study, the numerical computation is used to investigate the transient movement of a water droplet in a microchannel. For tracking the evolution of the free interface between two immiscible fluids, we employed the finite element method with the two-phase level set technique to solve the Navier-Stokes equations coupled with the energy equation. Both the upper wall and the bottom wall of the microchannel are set to be an ambient temperature. 40mW heat source is placed at the distance of 1 mm from the initial position of a water droplet. When the heat source is turned on, a pair of asymmetric thermocapillary convection vortices is formed inside the droplet and the thermocapillary on the receding side is smaller than that on the advancing side. The temperature gradient inside the droplet increases quickly at the initial times and then decreases versus time. Therefore, the actuation velocity of the water droplet first increases significantly, and then decreases continuously. The dynamic contact angle is strongly affected by the oil flow motion and the net thermocapillary momentum inside the droplet. The advancing contact angle is always larger than the receding contact angle during actuation process.


Author(s):  
Bo Shi ◽  
Shashank Sinha ◽  
Vijay K. Dhir

This paper presents a molecular simulation study of the contact angles of water droplets on a platinum surface for a range of temperatures. SPC/E and Z-P model are used for the water-water and water-platinum potentials, respectively. The results show that the contact angle decreases with the increase of system temperatures and increases when the potential decreases. When the temperature is high enough, the contact angles drop to zero degrees. The results were compared with the argon-virtual solid wall and water-Aluminum results, a similar trend was found.


2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Matilda Backholm ◽  
Daniel Molpeceres ◽  
Maja Vuckovac ◽  
Heikki Nurmi ◽  
Matti J. Hokkanen ◽  
...  

Abstract Superhydrophobicity is a remarkable surface property found in nature and mimicked in many engineering applications, including anti-wetting, anti-fogging, and anti-fouling coatings. As synthetic superhydrophobic coatings approach the extreme non-wetting limit, quantification of their slipperiness becomes increasingly challenging: although contact angle goniometry remains widely used as the gold standard method, it has proven insufficient. Here, micropipette force sensors are used to directly measure the friction force of water droplets moving on super-slippery superhydrophobic surfaces that cannot be quantified with contact angle goniometry. Superhydrophobic etched silicon surfaces with tunable slipperiness are investigated as model samples. Micropipette force sensors render up to three orders of magnitude better force sensitivity than using the indirect contact angle goniometry approach. We directly measure a friction force as low as 7 ± 4 nN for a millimetric water droplet moving on the most slippery surface. Finally, we combine micropipette force sensors with particle image velocimetry and reveal purely rolling water droplets on superhydrophobic surfaces.


2018 ◽  
Vol 7 (1) ◽  
pp. 26-29
Author(s):  
Nishant Nair ◽  
Snehal Jani
Keyword(s):  

2004 ◽  
Vol 39 (1) ◽  
pp. 103-108 ◽  
Author(s):  
Takaomi Suzuki ◽  
Go Hirose ◽  
Shuji Oishi

Author(s):  
Sumith Yesudasan

In this work, a tool for estimating the contact angle from the molecular dynamics simulations is developed and presented. The tool (Achilles) can detect water droplet on hydrophobic and hydrophilic surfaces. The tool can reconstruct the droplets broken across the periodic boundaries. Further a neighbor density based accurate filter is used to find the droplet liquid vapor interface and a circle is fitted using it after removing the dense layers of water next to solid surface. This fitted circle is solved for contact angle and results are outputted in the form of graphical images and text. The entire content of the internal computations of the tool is broken down into 4 phases and users can monitor the outcomes at every phase through output images. The tool is tested using sample molecular dynamics results of water droplet on hydrophobic and hydrophilic surfaces. We believe this tool can be a good addition to the molecular dynamics simulation community who work on the interfacial physics, droplet evaporation, super hydrophobic surfaces, and wettability etc.


Sign in / Sign up

Export Citation Format

Share Document