With the development of remote sensing technology and very large-scale integrated circuit (VLSI) technology, the real-time processing of spaceborne Synthetic Aperture Radar (SAR) has greatly improved the ability of Earth observation. However, the characteristics of external memory have led to matrix transposition becoming a technical bottleneck that limits the real-time performance of the SAR imaging system. In order to solve this problem, this paper combines the optimized data mapping method and reasonable hardware architecture to implement a data controller based on the Field-Programmable Gate Array (FPGA). First of all, this paper proposes an optimized dual-channel data storage and access method, so that the two-dimensional data access efficiency can be improved. Then, a hardware architecture is designed with register manager, simplified address generator and dual-channel Double-Data-Rate Three Synchronous Dynamic Random-Access Memory (DDR3 SDRAM) access mode. Finally, the proposed data controller is implemented on the Xilinx XC7VX690T FPGA chip. The experimental results show that the reading efficiency of the data controller proposed is 80% both in the range direction and azimuth direction, and the writing efficiency is 66% both in the range direction and azimuth direction. The results of a comparison with the recent implementations show that the proposed data controller has a higher data bandwidth, is more flexible in its design, and is suitable for use in spaceborne scenarios.
ASSESSMENT OF THE ACCURACY AND PRECISION OF A NEAR-REAL-TIME PROCESSING METHOD OF LASER SCAN DATA APPLIED ON CONCRETE STRUCTURES
