Sliding Mode Control Algorithm Based on RBF Neural Network Observer for Pneumatic Position Servo System

Author(s):  
Gang Liu ◽  
Mingsi Tong ◽  
Chenglin Yang ◽  
Zhitai Liu ◽  
Weiyang Lin
Author(s):  
Renqiang Wang ◽  
Qinrong Li ◽  
Shengze Miao ◽  
Keyin Miao ◽  
Hua Deng

Abstract: The purpose of this paper was to design an intelligent controller of ship motion based on sliding mode control with a Radial Basis Function (RBF) neural network optimized by the genetic algorithm and expansion observer. First, the improved genetic algorithm based on the distributed genetic algorithm with adaptive fitness and adaptive mutation was used to automatically optimize the RBF neural network. Then, with the compensation designed by the RBF neural network, anti-saturation control was realized. Additionally, the intelligent control algorithm was introduced by Sliding Mode Control (SMC) with the stability theory. A comparative study of sliding mode control integrated with the RBF neural network and proportional–integral–derivative control combined with the fuzzy optimization model showed that the stabilization time of the intelligent control system was 43.75% faster and the average overshoot was reduced by 52% compared with the previous two attempts. Background: It was known that the Proportional-Integral-Derivative (PID) control and self-adaptation control cannot really solve the problems of frequent disturbance from external wind and waves, as well as the problems with ship nonlinearity and input saturation. So, the previous ship motion controller should be transformed by advanced intelligent technology, on the basis of referring to the latest relevant patent design methods. Objective: An intelligent controller of ship motion was designed based on optimized Radial Basis Function Neural Network (RBFNN) in the presence of non-linearity, uncertainty, and limited input. Methods: The previous ship motion controller was remodeled based on Sliding Mode Control (SMC) with RBFNN optimized by improved genetic algorithm and expansion observer. The intelligent control algorithm integrated with genetic neural network solved the problem of system model uncertainty, limited control input, and external interference. Distributed genetic with adaptive fitness and adaptive mutation method guaranteed the adequacy of search and the global optimal convergence results, which enhanced the approximation ability of RBFNN. With the compensation designed by the optimized RBFNN, it was realized anti-saturation control. The chattering caused by external disturbance in SMC controller was reduced by the expansion observer. Results: A comparative study with RBFNN-SMC control and fuzzy-PID control, the stabilization time of the intelligent control system was 43.75% faster, the average overshoot was reduced by 52%, compared to the previous two attempts. Conclusion: The intelligent control algorithm succeed in dealing with the problems of nonlinearity, uncertainty, input saturation, and external interference. The intelligent control algorithm can be applied into research and development ship steering system, which would be created a new patent.


2020 ◽  
Vol 66 (12) ◽  
pp. 697-708
Author(s):  
Wending Li ◽  
Guanglin Shi ◽  
Chun Zhao ◽  
Hongyu Liu ◽  
Junyong Fu

Aiming at the interference problem and the difficulty of model parameter determination caused by the nonlinearity of the valve-controlled hydraulic cylinder position servo system, this study proposes a radial basis function (RBF) neural network sliding mode control strategy based on a backstepping strategy for the electro-hydraulic actuator. First, the non-linear system model of the third-order position electro-hydraulic control servo system is established on the basis of the principle analysis. Second, the model function RBF adaptive law and backstepping control law are designed according to Lyapunov’s stability theorem to solve the problem of external load disturbance and modelling uncertainty, combined with sliding mode control strategy and virtual control law. Finally, simulation and experiment on MATLAB Simulink and semi-physical experimental platform are accomplished to show the effectiveness of the proposed method. Moreover, results show that the designed controller has high tracking accuracy to the given signal.


2010 ◽  
Vol 439-440 ◽  
pp. 440-444
Author(s):  
Xiao Juan Shi

Combining cerebella model articulation controller with sliding mode control, a novel control algorithm is designed. It adopts neuron PID controller as the teacher signal of CMAC. The control error rapidly tends to zero by adjusting weight of each corresponding unit in CMAC storage. The control algorithm eliminates the chattering in the conventional sliding mode control. It also has high real-time, strong robustness and better convergence. The control algorithm is applied on position servo system of NC machining tool. The experimental results show that it improves dynamic performance and static performance of position servo system. It can realize rapid and exact position servo control of NC machine tool.


Sign in / Sign up

Export Citation Format

Share Document