Low-power, folded cascode near rail-to-rail OTA for moderate frequency signal processing

Carbon nanotube (CNT) is one of the embryonic technologies within recent inventions towards miniaturization of semiconductor devices and is gaining much attention due to very high throughput and very extensive series of applications in various analog/mixed signal applications of today’s high-speed era. The carbon nanotube field effect transistors (CNFETs) have been reconnoitred as the stimulating aspirant for the future generations of integrated circuit (IC) devices. CNFETs are being widely deliberated as probable replacement to silicon MOSFETs also. In this paper, different analog signal processing applications such as inverting amplifier, noninverting amplifier, summer, subtractor, differentiator, integrator, half-wave and full-wave rectifiers, clipper, clamper, inverting and noninverting comparators, peak detector, and zero crossing detector are implemented using low-power folded cascode operational amplifier (op-amp) implemented using CNFET. The proposed CNFET-based analog signal processing applications are instigated at 32 nm technology node. Simulation results show that the proposed applications are properly implemented using novel folded cascode operational amplifier (FCOA) implemented using CNFET.

Download Full-text

Patch-Type Vibration Visualization (PVV) Sensor System Based on Triboelectric Effect

Sensors ◽

10.3390/s21123976 ◽

2021 ◽

Vol 21 (12) ◽

pp. 3976

Author(s):

Sun Jin Kim ◽

Myeong-Lok Seol ◽

Byun-Young Chung ◽

Dae-Sic Jang ◽

Jonghwan Kim ◽

...

Keyword(s):

Signal Processing ◽

Low Power ◽

Nuclear Power ◽

Power Plants ◽

Computing System ◽

Sensor System ◽

Wireless Sensor ◽

Sensor Systems ◽

Patch Type ◽

Triboelectric Effect

Self-powered wireless sensor systems have emerged as an important topic for condition monitoring in nuclear power plants. However, commercial wireless sensor systems still cannot be fully self-sustainable due to the high power consumption caused by excessive signal processing in a mini-electronic computing system. In this sense, it is essential not only to integrate the sensor system with energy-harvesting devices but also to develop simple data processing methods for low power schemes. In this paper, we report a patch-type vibration visualization (PVV) sensor system based on the triboelectric effect and a visualization technique for self-sustainable operation. The PVV sensor system composed of a polyethylene terephthalate (PET)/Al/LCD screen directly converts the triboelectric signal into an informative black pattern on the LCD screen without excessive signal processing, enabling extremely low power operation. In addition, a proposed image processing method reconverts the black patterns to frequency and acceleration values through a remote-control camera. With these simple signal-to-pattern conversion and pattern-to-data reconversion techniques, a vibration visualization sensor network has successfully been demonstrated.

Download Full-text

A Novel architecture of a Low Power Folded Cascode OTA in 180nm CMOS process

2021 7th International Conference on Advanced Computing and Communication Systems (ICACCS) ◽

10.1109/icaccs51430.2021.9441988 ◽

2021 ◽

Author(s):

D. S. Shylu Sam ◽

P. Sam Paul ◽

D. Jayanthi

Keyword(s):

Low Power ◽

Cmos Process ◽

Folded Cascode

Download Full-text

A 0.3 V Rail-to-Rail Ultra-Low-Power OTA with Improved Bandwidth and Slew Rate

Journal of Low Power Electronics and Applications ◽

10.3390/jlpea11020019 ◽

2021 ◽

Vol 11 (2) ◽

pp. 19

Author(s):

Francesco Centurelli ◽

Riccardo Della Sala ◽

Pietro Monsurrò ◽

Giuseppe Scotti ◽

Alessandro Trifiletti

Keyword(s):

Low Power ◽

Low Voltage ◽

Supply Voltage ◽

Cmos Process ◽

Slew Rate ◽

Large Signal ◽

Output Stage ◽

Ultra Low Power ◽

Input Stage ◽

Rail To Rail

In this paper, we present a novel operational transconductance amplifier (OTA) topology based on a dual-path body-driven input stage that exploits a body-driven current mirror-active load and targets ultra-low-power (ULP) and ultra-low-voltage (ULV) applications, such as IoT or biomedical devices. The proposed OTA exhibits only one high-impedance node, and can therefore be compensated at the output stage, thus not requiring Miller compensation. The input stage ensures rail-to-rail input common-mode range, whereas the gate-driven output stage ensures both a high open-loop gain and an enhanced slew rate. The proposed amplifier was designed in an STMicroelectronics 130 nm CMOS process with a nominal supply voltage of only 0.3 V, and it achieved very good values for both the small-signal and large-signal Figures of Merit. Extensive PVT (process, supply voltage, and temperature) and mismatch simulations are reported to prove the robustness of the proposed amplifier.

Download Full-text