Gain Enhancement of Triangular Multiband antenna using a Combination of Reactive Impedance Surface, Frequency Selective Surface and Defected Ground Structure

2021 ◽  
Author(s):  
Mahendran. K Research ◽  
R. Gayathri
Keyword(s):  
Frequency Selective Surface ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Impédance Surface ◽  
Impedance Surface ◽  
Multiband Antenna ◽  
Gain Enhancement ◽  
Frequency Selective

Erratum for: Analysis of antenna gain enhancement using new frequency selective surface superstate

2016 ◽  
Vol 58 (7) ◽  
pp. 1774-1774
Author(s):  
Moufida Bouslama ◽  
Moubarek Traii ◽  
Ali Gharsallah ◽  
Tayeb Ahmed Denidni
Keyword(s):  
Frequency Selective Surface ◽  
Antenna Gain ◽  
Gain Enhancement ◽  
Frequency Selective

scholarly journals Multiband and Miniaturized dual layer Antenna incorporated with FSS and DGS

2018 ◽  
Vol 7 (1) ◽  
pp. 1-6 ◽  
Author(s):  
S. Sah ◽  
M. R. Tripathy ◽  
A. Mittal
Keyword(s):  
Wireless Communication ◽  
Frequency Selective Surfaces ◽  
Printed Antenna ◽  
Defected Ground Structure ◽  
Patch Area ◽  
Ground Structure ◽  
X Band ◽  
Type Frequency ◽  
Frequency Selective

A novel dual  layer rectangular printed Antenna based on loop type Frequency selective surfaces with five concentric rings and I shaped defected ground structure (DGS) is designed and investigated. The deigned antenna is tested for application in C band, WiFi devices and some cordless telephones and X band radiolocation, airborne and naval radars as multiband  operational frequencies are at 5.5GHz, 6.81GHz, 9.3GHz and thus covers two wireless communication band C Band (4 to 8GHz ) and  X band (8 to 12 GHz) The bandwidth is 200MHz, 300MHz and 1GHz respectively and measured gain of this designed antenna are 2.42dBi against 5.5GHz, 2.80dBi against 6.81GHz, 6.76dBi against 9.3GHz. The proposed antenna in addition to multiband operation also exhibits minituarization.The Floquet port technique is used to analyse concentric rings. The Results comparison of proposed structure with the basic dual layer antenna resonaing at 5.5GHz  shows the patch area is reduced by 58.15% while the volume of the antenna is reduced by 81.5%. 

scholarly journals Performance Improvement of Sri Yantra Shaped Multiband Antenna with Defected Ground Structure

2018 ◽  
Vol 7 (3.31) ◽  
pp. 40 ◽  
Author(s):  
P Krishna Kanth Varma ◽  
Ch Murali Krishna ◽  
G Santhi Ratna Priyanka
Keyword(s):  
Performance Improvement ◽  
Frequency Spectrum ◽  
Microwave Frequency ◽  
Fractal Antenna ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Multiband Antenna ◽  
Circular Patch ◽  
Antenna Characteristics

A hybrid fractal antenna inspired from sri yantra geometry covering multiple bands in the microwave frequency spectrum is presented in this paper with a reduced size of 45mm x 30mm x 1.6mm. The presented design aims at a multiband antenna with a polygon slots in- scribed in a circular patch with defected ground structure and the effect of Sri Yantra fractal iterations on the antenna characteristics are also studied. The gains achieved at respective bands for Sri Yantra geometry are 4.61dB at 4.04GHz, 2.71dB at 4.94GHz, 4.77dB at 5.88GHz, 3.41dB at 6.60GHz, 5.12dB at 7.24GHz, 3.11dB at 8.88GHz and 3.47dB at 10.92GHz.  

scholarly journals Designing Franklin’s Microstrip Antenna with Defected Ground Structure at MMwave Frequency

2021 ◽  
pp. 559-565
Author(s):  
Ahmad Firdausi ◽  
◽  
I Made Dian Wahyudi ◽  
Mudrik Alaydrus
Keyword(s):  
Microstrip Antenna ◽  
Data Access ◽  
Microstrip Antennas ◽  
Reflection Factor ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Ground Field ◽  
Bandwidth Enhancement ◽  
Ground Structure Method ◽  
Gain Enhancement

The development of telecommunication technology is very rapid at this time has entered into 4G technology. Soon, the 5G technology has a fast data access speed of at least 1 Gbps. To support 5G technology is carried out in-depth research, especially in 5G antennas. This study aims to increase the bandwidth of Franklin's five array microstrip antennas using the DGS (Defected Ground Structure) method for 5G antenna applications at an operating frequency of 28 GHz. The research was conducted by doing rectangular defects in the ground field. This research produced an enhanced bandwidth by 1.707 GHz from 1.196 GHz without DGS (Defected Ground Structure) to 2.9 GHz with DGS (Defected Ground Structure). It means a bandwidth enhancement of 142.47%. At the same time, the design achieved a gain enhancement of 141.7 %. Franklin's microstrip antenna output with DGS (Defected Ground Structure) method from the research simulation results are the bandwidth of 2.9 GHz, reflection factor of -52.95 dB, and Gain 11.80 dB. In comparison, the results of antenna measurements that have been fabricated produce bandwidth of 2 GHz, reflection factor -27.72 dB on frequency 26.6 GHz. The deviation between the simulation and measurement may result in inaccuracies during the fabrication process.

scholarly journals Design of Multiband Antenna for Wimax and WLAN Applications Using DGS

2018 ◽  
Vol 7 (3.12) ◽  
pp. 140
Author(s):  
Banuprakash R ◽  
GSPN Amith ◽  
Gagana N ◽  
Ravi AG ◽  
Pavanashree C
Keyword(s):  
Dielectric Constant ◽  
Return Loss ◽  
Radiation Patterns ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Multiband Antenna ◽  
Feed Line

In this paper, a multiband antenna with a micro strip feed line is presented. This antenna is designed on FR4 substrate with dielectric constant 4.4 having overall size of 20 × 20 × 1.6mm3. The proposed antenna comprises defected ground structure with T and L shape slots to achieve multiband frequencies. This multiband antenna covers three different frequencies as 3.3 GHz, 3.85 GHz and 5.25 GHz. All of these frequencies are applicable for WiMAX and WLAN applications respectively. Return loss (S11), Gain and Radiation patterns are simulated and observed on HFSS.  

Sign in / Sign up

Export Citation Format

Share Document