scholarly journals Non-Collocated Displacement Sensing by Semiconductor Strain Gauges in Differentially Piezo-Driven Nanopositioners

2020 ◽  
pp. 1-1
Author(s):  
Ali Bazaei ◽  
Mokrane Boudaoud ◽  
Massoud Hemmasian Ettefagh ◽  
Zhiyong Chen ◽  
Stephane Regnier
Materials ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2110 ◽  
Author(s):  
Michał Nowicki ◽  
Piotr Gazda ◽  
Roman Szewczyk ◽  
Andriy Marusenkov ◽  
Anton Nosenko ◽  
...  

The significant strain dependence of the hysteretic Giant Magnetoimpedance (GMI) effect in a Co67Fe3Cr3B12Si15 amorphous alloy in a low magnetizing field is presented. A simplistic test stand capable of continuous measurements of GMI characteristics under the influence of strain is detailed. Based on the results, a stress-impedance (SI) sensor is proposed, with a gauge factor similar to semiconductor strain gauges but more robust. An effective method of minimizing external magnetic field influence on the SI effect is given.


1974 ◽  
Vol 18 (3) ◽  
pp. 329-336
Author(s):  
Eiichi Bando ◽  
Batsuhei Tanaka ◽  
Shigeo Hasegawa

1961 ◽  
Vol 33 (11) ◽  
pp. 1654-1654
Author(s):  
R. N. Thurston

Author(s):  
Abhishek Kamal ◽  
Vinayak Kulkarni ◽  
Niranjan Sahoo

Today, measurement of strain plays a crucial role in different areas of research such as manufacturing, aerospace, automotive industry, agriculture, and medical. Many researchers have used different types of strain transducers to measure strain in their relevant research fields. Strain can be measured using mainly two methods (i.e., electrical strain sensors and optical strain sensors). Electrical strain sensors consist basically of strain gauges, piezo film, etc. In electrical strain sensors, the strain gauge is one of the oldest and reliable strain sensors which are available in different types (i.e., wire strain gauge, foil strain gauge, and semiconductor strain gauge). Piezofilm is also playing an important role in the field of strain measurement due to easy availability and less cost.


2020 ◽  
Vol 323 ◽  
pp. 01007
Author(s):  
Lena Leicht ◽  
Franz Bracklow ◽  
Marcus Hering ◽  
Manfred Curbach

Drop tower tests help to gain understanding about the general behaviour of reinforced concrete members under impact loading and to analyse strains and strain rates occurring within their reinforcement. For this purpose, beam and slab specimens are usually employed. The main advantage of beams compared to slabs is that they are less complex due to the almost two-dimensional instead of three-dimensional wave propagation within them. To investigate the steel strains and strain rates, ten impact tests on beam specimens with various impact energies were performed. The impactor sizes and velocities were varied. The reinforcement bars of the beams were instrumented with semiconductor strain gauges. The measured data suggest that the occurring strains in beam tests are independent of the loading velocity. The same was found for the strain rates. The reason is that higher impact energies mostly influence the concrete damage due to spalling on the impact-facing side which happens after the maximum strains occurred. The strains in the reinforcement bars generally result from the overall deflection because of the impact, the spreading of longitudinal waves in the horizontal direction, and the localized cracking of the concrete due to the formation of a punching cone.


Sign in / Sign up

Export Citation Format

Share Document