Secrecy Rate Analysis of Open-Loop Analog Collaborative Beamforming Under Position Estimation Error of Virtual Antenna Array

2019 ◽  
Vol 8 (5) ◽  
pp. 1337-1340 ◽  
Author(s):  
Haejoon Jung ◽  
In-Ho Lee
2020 ◽  
Vol 24 (2) ◽  
pp. 272-276
Author(s):  
Kai Wu ◽  
Wei Ni ◽  
J. Andrew Zhang ◽  
Ren Ping Liu ◽  
Jay Guo

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1254
Author(s):  
Gianluca Brando ◽  
Adolfo Dannier ◽  
Ivan Spina

This paper focuses on the performance analysis of a sensorless control for a Doubly Fed Induction Generator (DFIG) in grid-connected operation for turbine-based wind generation systems. With reference to a conventional stator flux based Field Oriented Control (FOC), a full-order adaptive observer is implemented and a criterion to calculate the observer gain matrix is provided. The observer provides the estimated stator flux and an estimation of the rotor position is also obtained through the measurements of stator and rotor phase currents. Due to parameter inaccuracy, the rotor position estimation is affected by an error. As a novelty of the discussed approach, the rotor position estimation error is considered as an additional machine parameter, and an error tracking procedure is envisioned in order to track the DFIG rotor position with better accuracy. In particular, an adaptive law based on the Lyapunov theory is implemented for the tracking of the rotor position estimation error, and a current injection strategy is developed in order to ensure the necessary tracking sensitivity around zero rotor voltages. The roughly evaluated rotor position can be corrected by means of the tracked rotor position estimation error, so that the corrected rotor position is sent to the FOC for the necessary rotating coordinate transformation. An extensive experimental analysis is carried out on an 11 kW, 4 poles, 400 V/50 Hz induction machine testifying the quality of the sensorless control.


Author(s):  
Tong Shen ◽  
Tingting Liu ◽  
Yan Lin ◽  
Yongpeng Wu ◽  
Feng Shu ◽  
...  

Abstract In this paper, two regional robust secure precise wireless transmission (SPWT) schemes for multi-user unmanned aerial vehicle (UAV), (1)regional signal-to-leakage-and-noise ratio (SLNR) and artificial-noise-to-leakage-and-noise ratio (ANLNR) (R-SLNR-ANLNR) maximization and (2) point SLNR and ANLNR (P-SLNR-ANLNR) maximization, are proposed to tackle with the estimation errors of the target users’ location. In the SPWT system, the estimation error for SPWT cannot be ignored. However, the conventional robust methods in secure wireless communications optimize the beamforming vector in the desired positions only in statistical means and cannot guarantee the security for each symbol. The proposed regional robust schemes are designed for optimizing the secrecy performance in the whole error region around the estimated location. Specifically, with the known maximal estimation error, we define the target region and wiretap region. Then, we design an optimal beamforming vector and an artificial noise projection matrix, which achieve the confidential signal in the target area having the maximal power while only few signal power is conserved in the potential wiretap region. Instead of considering the statistical distributions of the estimated errors into optimization, we optimize the SLNR and ANLNR of the whole target area, which significantly decreases the complexity. Moreover, the proposed schemes can ensure that the desired users are located in the optimized region, which are more practical than the conventional methods. Simulation results show that our proposed regional robust SPWT design is capable of substantially improving the secrecy rate compared to the conventional non-robust method. The P-SLNR-ANLNR maximization-based method has the comparable secrecy performance with lower complexity than that of the R-SLNR-ANLNR maximization-based method.


2014 ◽  
Vol 989-994 ◽  
pp. 3252-3257
Author(s):  
Zi Fei Jia ◽  
De An Zhao ◽  
Yu Yan Zhao

To realize starting operation and reduce position estimation error of switched reluctance motor (SRM) without position sensor, a novel control method based on pulse injection, divided angle section and variable threshold is presented. The starting operation of SRM can be accomplished by injecting high frequency pulse and judging position sectors. Variable threshold is used to reduce position estimation error. The value of threshold is obtained by looking up table prestored in controller. The method avoids complicated mathematical model and is suitable for starting operation with two phases. Besides, rotor position estimation error of this method is analyzed and the method which can decreased the error is proposed. At last, the experiment has been done to verify the performance of the control method.


Author(s):  
Jong-Shin Chen ◽  
Cheng-Ying Yang ◽  
Jenq-Foung Jf Yao ◽  
Min-Hsiang Hwang

Sign in / Sign up

Export Citation Format

Share Document