Non-linear system and subsystem modelling in the time domain

Author(s):  
M.I. Sobhy ◽  
E.A. Hosny ◽  
M.W.R. Ng ◽  
E.-S.A. Bakkar
Author(s):  
Michael D Krak ◽  
Rajendra Singh

The primary goal of this article is to propose a new analysis tool that estimates the asymptotic trends in the time-varying oscillatory period of a non-linear mechanical system. The scope is limited to the step-response of a torsional oscillator containing a dry friction element and dual-staged spring. Prior work on the stochastic linearization techniques is extended and modified for application in time domain. Subsequently, an instantaneous expected value operator and the concept of instantaneous effective stiffness are proposed. The non-linear system is approximated at some instant during the step-response by a linear time-invariant mechanical system that utilizes the instantaneous effective stiffness concept. The oscillatory period of the non-linear step-response at that instant is then approximated by the natural period of the corresponding linear system. The proposed method is rigorously illustrated via two computational example cases (a near backlash and near pre-load non-linearities), and the necessary digital signal processing parameters for time domain analysis are investigated. Finally, the feasibility and applicability of the proposed method is demonstrated by estimating the softening and hardening trends in the time-varying oscillatory period of the measured response for two laboratory experiments that contain clearance elements and multi-staged torsional springs.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Akshaykumar Naregalkar ◽  
Subbulekshmi Durairaj

Abstract A continuous stirred tank reactor (CSTR) servo and the regulatory control problem are challenging because of their highly non-linear nature, frequent changes in operating points, and frequent disturbances. System identification is one of the important steps in the CSTR model-based control design. In earlier work, a non-linear system model comprises a linear subsystem followed by static nonlinearities and represented with Laguerre filters followed by the LSSVM (least squares support vector machines). This model structure solves linear dynamics first and then associated nonlinearities. Unlike earlier works, the proposed LSSVM-L (least squares support vector machines and Laguerre filters) Hammerstein model structure solves the nonlinearities associated with the non-linear system first and then linear dynamics. Thus, the proposed Hammerstein’s model structure deals with the nonlinearities before affecting the entire system, decreasing the model complexity and providing a simple model structure. This new Hammerstein model is stable, precise, and simple to implement and provides the CSTR model with a good model fit%. Simulation studies illustrate the benefit and effectiveness of the proposed LSSVM-L Hammerstein model and its efficacy as a non-linear model predictive controller for the servo and regulatory control problem.


1990 ◽  
Vol 2 (1) ◽  
pp. 65-76 ◽  
Author(s):  
Ph. B�nilan ◽  
D. Blanchard ◽  
H. Ghidouche

Sign in / Sign up

Export Citation Format

Share Document