scholarly journals Network Reconfiguration Impact on Renewable Energy System and Energy Storage System in Day-Ahead Scheduling

Author(s):  
Arun Venkatesh Ramesh ◽  
Xingpeng Li
Author(s):  
Tomonori Goya ◽  
Kosuke Uchida ◽  
Yoshihisa Kinjyo ◽  
Tomonobu Senjyu ◽  
Atsushi Yona ◽  
...  

Nowadays, renewable energy systems such as wind turbine generators and photovoltaic systems are introduced to power systems. However, the renewable energy system is influenced by weather conditions, and the generated power of the renewable energy system is deviated. For the provision of deviated power, the battery energy storage system is introduced to suppress the deviation of the frequency and voltage in power system. However, it needs the large capacity of a battery system, which increases the capital cost. In this paper, we propose a coordinated control strategy between the diesel generator and the battery system to reduce the capital cost of battery, inverter capacity and storage capacity. The proposed control system incorporates the H-infinity control theory, which enables intuitive controller design in frequency domain. Effectiveness of the proposed control system is validated by simulation results.


Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4908
Author(s):  
Loiy Al-Ghussain ◽  
Mohammad Abujubbeh ◽  
Adnan Darwish Ahmad ◽  
Ahmad M. Abubaker ◽  
Onur Taylan ◽  
...  

Many developing countries suffer from high energy-import dependency and inadequate electrification of rural areas, which aggravates the poverty problem. In this work, Al-Tafilah in Jordan was considered as a case study, where the technical, economic, and environmental benefits of a decentralized hybrid renewable energy system that can match 100% of the city demand were investigated. A tri-hybrid system of wind, solar, and hydropower was integrated with an energy storage system and optimized to maximize the match between the energy demand and production profiles. The optimization aimed at maximizing the renewable energy system (RES) fraction while keeping the levelized cost of electricity (LCOE) equal to the electricity purchase tariff. The techno-economic analysis showed that the optimal system in Al-Tafilah comprises a 28 MW wind system, 75.4 MW PV, and 1 MW hydropower, with a 259 MWh energy storage system, for which a RES fraction of 99% can be achieved, and 47,160 MtCO2 are avoided yearly. This study can be easily extended to other rural cities in Jordan, as they have higher renewable energy system (RES) potential. The presented findings are essential not only for Jordan’s planning and economy-boosting but also for contributing to the ongoing force against climate change.


Author(s):  
M. S. A. Mustaza ◽  
M. A. M. Ariff ◽  
Sofia Najwa Ramli

Energy storage system (ESS) plays a prominent role in renewable energy (RE) to overcome the intermittent of RE energy condition and improve energy utilization in the power system. However, ESS for residential applications requires specific and different configuration. Hence, this review paper aims to provide information for system builders to decide the best setup configuration of ESS for residential application. In this paper, the aim is to provide an insight into the critical elements of the energy storage technology for residential application. The update on ESS technology, battery chemistry, battery charging, and monitoring system and power inverter technology are reviewed. Then, the operation, the pro, and cons of each variant of these technologies are comprehensively studied. This paper suggested that the ESS for residential ESS requires NMC battery chemistry because it delivers an all-rounded performance as compared to other battery chemistries. The four-stages constant current (FCC) charging technique is recommended because of the fast charging capability and safer than other charging techniques reviewed. Next, the battery management system (BMS) is recommended to adapt in advance machine learning method to estimate the state of charge (SOC), state of health (SOH) and internal temperature (IT) to increase the safety and prolong the lifespan of the batteries. Finally, these recommendations and solutions aimed to improve the utilization of RE energy in power system, especially in residential ESS application and offer the best option that is available on the shelf for the residential ESS application in the future.


Author(s):  
Vaibhav Satpute ◽  
Anand Jawanjal

Sun provides abundant source of renewable energy that can be integrated with the electrical grid. Climate change issues have compelled policy makers to look into various ways to reduce carbon footprint and use green, renewable energy. Solar power, along with other alternative sources for energy, is quite popular these days. Talking about Solar, the primary disadvantage of solar power is that it obviously cannot be created during the night and power generated is also reduced during times of cloud cover. Energy Storage is a flexible asset that provides unprecedented flexibility in grid optimization. Cost effective solar energy storage methods are urgently needed due to the increased demand for solar power and due to its variability. But in today’s scenario, energy storage systems are not commercially economic for all customers, and that to more work needs to be done by industry, government, and regulators to support the continuing cost reductions. It is expected that the Energy Storage costs would slide to 41% by 2020.The value that solar and storage can together add to the energy system is leading to a more efficient, cleaner, and more secure future. However, solar energy storage becomes critical when unsteady sources of energy provide. Thus, affordable energy storage system along with the cheaper Solar energy would be lethal combination making an ultimate Game Changer for the Power Industry and Sustainability.


Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1269
Author(s):  
Yongzhen Wang ◽  
Congchuan Hu ◽  
Boyuan Wu ◽  
Jing Zhang ◽  
Zhenning Zi ◽  
...  

Considering the huge power consumption, rapid response and the short-term heat reserving capacity of the air conditioning load in the building’s energy system, the air conditioning load and its system can be equivalent to the virtual energy storage device for the power grid. Therefore, to obtain a high matching building renewable energy system, a virtual energy storage system of the air conditioning load, accompanied by a storage battery, was built in the paper. Then, operating strategies for the virtual energy storage of the air conditioning load and storage battery were designed. Further, to quantize the contribution of the virtual energy storage to the improvement of matching characteristics, two indicators of the demand side and supply side in the energy system were adopted, including on-site energy fraction (OEFr) and on-site energy matching (OEMr). Lastly, matching characteristic research of the building’s renewable energy system based on virtual energy storage of the air conditioning load was established and analyzed by TRNSYS and MATLAB in Tianjin, China. The results revealed that a better matching characteristic performance of the building’s renewable energy systems driven by virtual energy storage was obtained. In the condition set out in the paper, compared with that without virtual energy storage, the average values of OEFr and OEMr after virtual energy storage were 0.66 and 0.77, which increased by 8.19% and 8.45% respectively. Simultaneously, the battery operation performance in the building renewable system was improved when the virtual energy storage was working. The times of charge and discharge cycles decreased after virtual energy storage, and the depth of discharge of the battery reduced by 23.37% on a specific day.


2017 ◽  
Vol 68 (11) ◽  
pp. 2641-2645
Author(s):  
Alexandru Ciocan ◽  
Ovidiu Mihai Balan ◽  
Mihaela Ramona Buga ◽  
Tudor Prisecaru ◽  
Mohand Tazerout

The current paper presents an energy storage system that stores the excessive energy, provided by a hybrid system of renewable energy sources, in the form of compressed air and thermal heat. Using energy storage systems together with renewable energy sources represents a major challenge that could ensure the transition to a viable economic future and a decarbonized economy. Thermodynamic calculations are conducted to investigate the performance of such systems by using Matlab simulation tools. The results indicate the values of primary and global efficiencies for various operating scenarios for the energy storage systems which use compressed air as medium storage, and shows that these could be very effective systems, proving the possibility to supply to the final user three types of energy: electricity, heat and cold function of his needs.


Sign in / Sign up

Export Citation Format

Share Document