Dependence of transmission on number of rows of 2D macroporous silicon photonic band gap material

Author(s):  
S.W. Leonard ◽  
K. Busch ◽  
S. John ◽  
H.M. van Driel ◽  
A. Birner ◽  
...  
2002 ◽  
Vol 722 ◽  
Author(s):  
H. M. van Driel ◽  
S.W. Leonard ◽  
J. Schilling ◽  
R.B. Wehrspohn

AbstractWe demonstrate two ways in which the optical band-gap of a 2-D macroporous silicon photonic crystal can be tuned. In the first method the temperature dependence of the refractive index of an infiltrated nematic liquid crystal is used to tune the high frequency edge of the photonic band gap by up to 70 nm as the temperature is increased from 35 to 59°C. In a second technique we have optically pumped the silicon backbone using 150 fs, 800 nm pulses, injecting high density electron hole pairs. Through the induced changes to the dielectric constant via the Drude contribution we have observed shifts up to 30 nm of the high frequency edge of a band-gap.


2005 ◽  
Vol 86 (1) ◽  
pp. 011101 ◽  
Author(s):  
J. Schilling ◽  
J. White ◽  
A. Scherer ◽  
G. Stupian ◽  
R. Hillebrand ◽  
...  

2009 ◽  
Vol 24 (1) ◽  
pp. 57-60 ◽  
Author(s):  
Wei-Gang ZHANG ◽  
Jun YAN ◽  
Gang WANG ◽  
Hao-Xuan LI ◽  
Gang-Sheng ZHANG

2007 ◽  
Vol 280-283 ◽  
pp. 533-536
Author(s):  
Hai Qing Yin ◽  
Soshu Kirihara ◽  
Yoshinari Miyamoto

The three-dimensional (3D) photonic band gap material is a material that there exists a full photonic band gap in which waves are forbidden to propagate whatever the polarization or the direction of propagation. In order to obtain photonic bandgap in lower range, we focus on the fabrication of PBG materials of diamond structure with TiO2 powder mixed with SiO2. The inverse epoxy structure with periodic diamond lattices in millimeter order has been fabricated by stereolithographic rapid prototyping. TiO2 slurry was filled into the epoxy structure and then cold isostatic pressing was applied. After sintering at 700K for 5hrs, the epoxy was burnt out and the designed structure was maintained perfectly. The calculated band diagram shows that there exists an absolute photonic band gap for all wave vectors. The measurement of transmission from 10 to 20 GHz in <100> direction shows that a complete band gap is formed at about 14.7-18.5 GHz. The magnitude of the maximum attenuation is as large as 30 dB at 17 GHz.


2007 ◽  
Vol 85 (9) ◽  
pp. 981-994
Author(s):  
H Zhang ◽  
G Q Liu ◽  
H Z Zhang

Two models (an upper levels coupling model and a lower levels coupling model) of a four-level atom embedded in a double-band photonic crystal are adopted. The effect of spontaneous emission cancellation of such systems embedded in different reservoirs are investigated. Especially, the "trapping conditions" of such systems in photonic band gap (PBG) reservoirs are discussed for the first time. We also investigate the different quantum interference effects of the lower levels coupling model embedded in an isotropic PBG reservoir. It is interesting that when the trapping conditions are fulfilled, the additional peaks, which result from the contribution of the additional singularities of Laplace transform of the delayed Green function of the isotropic PBG modes, are eliminated.PACS Nos.: 42.50.Gy, 42.50.Ct, 42.70.Qs


Optik ◽  
2003 ◽  
Vol 114 (3) ◽  
pp. 101-105 ◽  
Author(s):  
S.P. Ojha ◽  
Sanjeev K. Srivastava ◽  
N. Kumar ◽  
S.K. Srivastava

2012 ◽  
Author(s):  
Christian Wolff ◽  
Ulrich Hoeppe ◽  
Hartmut Benner ◽  
Kurt Busch

Sign in / Sign up

Export Citation Format

Share Document