Residual stress/strain analysis of bulk YBCO superconductors using EBSD

2021 ◽  
pp. 1-1
Author(s):  
Anjela Koblischka-Veneva ◽  
Michael R Koblischka
Keyword(s):  
Residual Stress ◽  
Strain Analysis ◽  
Stress Strain ◽  
Bulk Ybco ◽  
Ybco Superconductors

Study on Stress-Strain Model of Metallic Materials with Shot Peening Residual Stress

2012 ◽  
Vol 591-593 ◽  
pp. 1121-1126 ◽  
Author(s):  
Tie Shan Zhang ◽  
Jing Hu ◽  
Jin Shui Wu
Keyword(s):  
Residual Stress ◽  
Strain Analysis ◽  
Material Model ◽  
Metallic Materials ◽  
Model Combination ◽  
Stress Strain ◽  
Modeling Tools ◽  
The Relationship ◽  
Strain Model ◽  
Test Result

Study on Stress-strain model of metallic materials with residual stress. First of all, Stress-strain model of metallic materials with residual stress was analyzed, then, derivation of a stress-strain model was done. Finally, according to the model of stress and strain analysis and derivation of results, taking diaphragm spring as an example, using methods of derivation of kinds of material obtained from this model portfolio, using finite element modeling tools, calculate the relationship between load and deformation. The test result indicated that, using the method of many kinds of material model combination can get the higher precision of calculation.

Delamination in the scoring and folding of paperboard

TAPPI Journal ◽  
2012 ◽  
Vol 11 (1) ◽  
pp. 61-66 ◽  
Author(s):  
DOEUNG D. CHOI ◽  
SERGIY A. LAVRYKOV ◽  
BANDARU V. RAMARAO
Keyword(s):  
Finite Element ◽  
Plane Deformation ◽  
Strain Analysis ◽  
Local Strain ◽  
Uniaxial Stress ◽  
Material Model ◽  
Element Model ◽  
Plastic Behavior ◽  
Stress Strain ◽  
Strain Fields

Delamination between layers occurs during the creasing and subsequent folding of paperboard. Delamination is necessary to provide some stiffness properties, but excessive or uncontrolled delamination can weaken the fold, and therefore needs to be controlled. An understanding of the mechanics of delamination is predicated upon the availability of reliable and properly calibrated simulation tools to predict experimental observations. This paper describes a finite element simulation of paper mechanics applied to the scoring and folding of multi-ply carton board. Our goal was to provide an understanding of the mechanics of these operations and the proper models of elastic and plastic behavior of the material that enable us to simulate the deformation and delamination behavior. Our material model accounted for plasticity and sheet anisotropy in the in-plane and z-direction (ZD) dimensions. We used different ZD stress-strain curves during loading and unloading. Material parameters for in-plane deformation were obtained by fitting uniaxial stress-strain data to Ramberg-Osgood plasticity models and the ZD deformation was modeled using a modified power law. Two-dimensional strain fields resulting from loading board typical of a scoring operation were calculated. The strain field was symmetric in the initial stages, but increasing deformation led to asymmetry and heterogeneity. These regions were precursors to delamination and failure. Delamination of the layers occurred in regions of significant shear strain and resulted primarily from the development of large plastic strains. The model predictions were confirmed by experimental observation of the local strain fields using visual microscopy and linear image strain analysis. The finite element model predicted sheet delamination matching the patterns and effects that were observed in experiments.

Stress-Strain Analysis and Simulation for Estimation of Cutting Forces on the Skin

2015 ◽  
Vol 9 (6) ◽  
pp. 583
Author(s):  
Dario German Buitrago ◽  
Luis Carlos Ruíz ◽  
Olga Lucia Ramos
Keyword(s):  
Cutting Forces ◽  
Strain Analysis ◽  
Stress Strain

scholarly journals Residual stress-strain relationship for the biochar-based mortar after exposure to elevated temperature

2021 ◽  
pp. e00540
Author(s):  
Satheeskumar Navaratnam ◽  
Hendrik Wijaya ◽  
Pathmanathan Rajeev ◽  
Priyan Mendis ◽  
Kate Nguyen
Keyword(s):  
Residual Stress ◽  
Elevated Temperature ◽  
Stress Strain ◽  
Strain Relationship

Effect of Residual Stress or Plastic Deformation History on Fatigue Life Simulation of Pipeline Dents

2018 ◽  
Author(s):  
Xian-Kui Zhu ◽  
Rick Wang
Keyword(s):  
Residual Stress ◽  
Plastic Deformation ◽  
Fatigue Life ◽  
Residual Stresses ◽  
Three Dimensional ◽  
Strain History ◽  
Deformation History ◽  
Stress Strain ◽  
Element Analysis ◽  
Fea Model

Mechanical dents often occur in transmission pipelines, and are recognized as one of major threats to pipeline integrity because of the potential fatigue failure due to cyclic pressures. With matured in-line-inspection (ILI) technology, mechanical dents can be identified from the ILI runs. Based on ILI measured dent profiles, finite element analysis (FEA) is commonly used to simulate stresses and strains in a dent, and to predict fatigue life of the dented pipeline. However, the dent profile defined by ILI data is a purely geometric shape without residual stresses nor plastic deformation history, and is different from its actual dent that contains residual stresses/strains due to dent creation and re-rounding. As a result, the FEA results of an ILI dent may not represent those of the actual dent, and may lead to inaccurate or incorrect results. To investigate the effect of residual stress or plastic deformation history on mechanics responses and fatigue life of an actual dent, three dent models are considered in this paper: (a) a true dent with residual stresses and dent formation history, (b) a purely geometric dent having the true dent profile with all stress/strain history removed from it, and (c) a purely geometric dent having an ILI defined dent profile with all stress/strain history removed from it. Using a three-dimensional FEA model, those three dents are simulated in the elastic-plastic conditions. The FEA results showed that the two geometric dents determine significantly different stresses and strains in comparison to those in the true dent, and overpredict the fatigue life or burst pressure of the true dent. On this basis, suggestions are made on how to use the ILI data to predict the dent fatigue life.

Stress Analysis of Pipeline Subjected to Differential Frost Heave

2013 ◽  
Author(s):  
Yan Di ◽  
Jian Shuai ◽  
Lingzhen Kong ◽  
Xiayi Zhou
Keyword(s):  
Strain Analysis ◽  
Element Model ◽  
Frozen Soil ◽  
Computational Method ◽  
Frost Heave ◽  
Safe Operation ◽  
Stress Strain ◽  
Segregation Potential ◽  
Differential Frost Heave ◽  
Design Construction

Frost heave must be considered in cases where pipelines are laid in permafrost in order to protect the pipelines from overstress and to maintain the safe operation. In this paper, a finite element model for stress/strain analysis in a pipeline subjected to differential frost heave was presented, in which the amount of frost heave is calculated using a segregation potential model and considering creep effects of the frozen soil. In addition, a computational method for the temperature field around a pipeline was proposed so that the frozen depth and temperature variation gradient could be obtained. Using the procedure proposed in this paper, stress/strain can be calculated according to the temperature on the surface of soil and in a pipeline. The result shows the characteristics of deformation and loading of a pipeline subjected to differential frost heave. In general, the methods and results in this paper can provide a reference for the design, construction and operation of pipelines in permafrost areas.

Numerical Modeling and Analytical Investigation of Autofrettage Process on the Fluid End Module of Fracture Pumps

2018 ◽  
Vol 140 (4) ◽  
Author(s):  
Mahdi Kiani ◽  
Roger Walker ◽  
Saman Babaeidarabad
Keyword(s):  
Residual Stresses ◽  
Kinematic Hardening ◽  
Analytical Formula ◽  
Strain Analysis ◽  
Material Model ◽  
Analytical Investigation ◽  
Stress Strain ◽  
Element Analysis ◽  
Hardening Material ◽  
Strain Evolution

One of the most important components in the hydraulic fracturing is a type of positive-displacement-reciprocating-pumps known as a fracture pump. The fluid end module of the pump is prone to failure due to unconventional drilling impacts of the fracking. The basis of the fluid end module can be attributed to cross bores. Stress concentration locations appear at the bores intersections and as a result of cyclic pressures failures occur. Autofrettage is one of the common technologies to enhance the fatigue resistance of the fluid end module through imposing the compressive residual stresses. However, evaluating the stress–strain evolution during the autofrettage and approximating the residual stresses are vital factors. Fluid end module geometry is complex and there is no straightforward analytical solution for prediction of the residual stresses induced by autofrettage. Finite element analysis (FEA) can be applied to simulate the autofrettage and investigate the stress–strain evolution and residual stress fields. Therefore, a nonlinear kinematic hardening material model was developed and calibrated to simulate the autofrettage process on a typical commercial triplex fluid end module. Moreover, the results were compared to a linear kinematic hardening model and a 6–12% difference between two models was observed for compressive residual hoop stress at different cross bore corners. However, implementing nonlinear FEA for solving the complicated problems is computationally expensive and time-consuming. Thus, the comparison between nonlinear FEA and a proposed analytical formula based on the notch strain analysis for a cross bore was performed and the accuracy of the analytical model was evaluated.

Sign in / Sign up

Export Citation Format

Share Document