Simple Neutral-Point Voltage Control for Three-Level Inverters Using a Discontinuous Pulse Width Modulation

2013 ◽  
Vol 28 (2) ◽  
pp. 434-443 ◽  
Author(s):  
Ui-Min Choi ◽  
Hyun-Hee Lee ◽  
Kyo-Beum Lee
Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1595
Author(s):  
Qiyu Li ◽  
Hongwei Zhou ◽  
Jiansong Zhang ◽  
Shengdun Zhao ◽  
Jingfeng Lu

The output LC filter of a photovoltaic (PV) string three-level grid-tied inverter that connects the filter capacitor neutral point to dc-link capacitor neutral point can reduce the common-mode (CM) current injected to the grid by letting the CM current circulate within the inverter. However, the internal CM current may resonate because of the existence of the resonant frequency of the internal CM LC circuit. Compared with the traditional continuous pulse-width modulation (CPWM), the resonance can be worse if discontinuous pulse-width modulation (DPWM) is applied, for the zero sequence quantity of DPWM contains more harmonics than that of CPWM. In this paper, a virtual negative resistor based common mode current resonance suppression method for a three-level grid-tied inverter is proposed to overcome the CM current resonance problem in DPWM application. Different positions of the virtual negative resistor in the equivalent CM circuit with different feedback variables are analyzed theoretically. The virtual negative resistor connected in series with the inductor in the equivalent CM circuit is selected to damp the CM current resonance for simplification and damping performance. Different from the implementation in CPWM where a pair of small voltage vectors exist and are used to adjust the CM voltage directly, the proposed method for DPWM application is implemented indirectly by adding the CM adjustment quantity to differential-mode (DM) control quantity with appropriate coefficients. Depending on the sector of DM control quantity in the α β reference frame, the coefficients are calculated using one of three specific voltage vectors. Experimental results are given to demonstrate the effectiveness of theoretical analyses and the proposed method.


2019 ◽  
Vol 8 (2) ◽  
pp. 5285-5287

In this paper, sinusoidal pulse width adjustment strategy for single stage four levels neutral point clamped inverter is proposed disposed of normal mode voltage. Sinusoidal pulse width modulation is much of the time utilized in modern applications. The gating sign are created by contrasting a sinusoidal reference signal and a triangular bearer sign of recurrence. The quantity of heartbeats per half-cycle relies upon the transporter recurrence


Sign in / Sign up

Export Citation Format

Share Document