Mandibular single-implant overdentures: preliminary results of a randomised-control trial on early loading with different implant diameters and attachment systems

Rehabilitating atrophied mandible with two-implant supported denture is a common treatment modality for implant retained removable overdenture in mandible. This paper aims to design a treatment modality where single implant reinforced overdenture is fabricated for a severely atrophied mandibular ridge with early loading protocol. Results of studies have shown that a single implant mandibular overdenture significantly increases the satisfaction and quality of life of patients with edentulism. Midline fracture of the prosthesis is the most common complication related to single implant and two-implant retained mandibular overdentures. To manage such complication, a thin metal mesh is used to reinforce the overdenture and also to make the prostheses lighter and cost effective as compared to conventional cast metal framework.

Download Full-text

Can Emotional Intelligence be trained? Preliminary results from a randomised control trial

Personality and Individual Differences ◽

10.1016/j.paid.2016.05.091 ◽

2016 ◽

Vol 101 ◽

pp. 468

Author(s):

L. Biggart ◽

P. Corr ◽

C. Fletcher ◽

C. Stride ◽

G. Schofield ◽

...

Keyword(s):

Emotional Intelligence ◽

Randomised Control Trial ◽

Preliminary Results

Download Full-text

CLINICALLY EVALUATED ACCURACY OF SINGLE GUIDED IMPLANTATIONS WITH TWO DIFFERENT SYSTEMS – PRELIMINARY RESULTS

Proceedings of CBU in Medicine and Pharmacy ◽

10.12955/pmp.v2.193 ◽

2021 ◽

Vol 2 ◽

pp. 178-183

Author(s):

Angelina Vlahova ◽

Stefan Zlatev ◽

Boyan Pavlov ◽

Ivan Chenchev ◽

Viktor Hadzhigaev

Keyword(s):

Preliminary Analysis ◽

Immediate Loading ◽

Computer Assisted ◽

Treatment Results ◽

Preliminary Results ◽

Implant Placement ◽

Surgical Guides ◽

Tissue Space ◽

Single Implant

Introduction: Guided single implant placement ensures an optimal implant position, enables in-surgery immediate loading, and creates a predisposition for predictable treatment results. Aim: This article aims to present the surgical and loading protocols and assess the accuracy of two guided implant systems. Materials and methods: Ten patients missing a single molar were included. The semi-guided procedures with the two implant systems – AB Dental and Alpha Bio-Tec, were randomly assigned to each participant. The computer-assisted planning was performed with Implant Studio (3Shape, Denmark). Surgical guides and long-term, temporary, screw-retained restorations were virtually generated within the 3Shape system. Surgical appliances were printed from SG resin (Formlabs, USA), and crowns were milled from Telio CAD (Ivoclar Vivadent, Lichtenstein). Planning accuracy was evaluated based on the crown’s fit and relation to the adjacent teeth and antagonists. Results and discussion: The patients included for preliminary analysis (6 female and 4 male) were with a mean age of 33.42. The youngest was 24, and the oldest 49 years old. There were no surgical and technical complications for the period of evaluation, which ranged from 1 to 3 months. The crown’s fit was excellent in 8 cases. In two cases, minor adjustments were necessary – 1 in relation to the antagonists and 1 to the adjacent teeth. In one case, a healing screw was placed for 48 hours to facilitate adequate soft-tissue space for the Ti-base. Conclusion: The preliminary results presented in this report suggest that the clinical and laboratory protocols used for guided implantation and immediate loading are highly efficient.

Download Full-text

The O–C diagrams of minor planets − a new approach to modelling the rotation

International Astronomical Union Colloquium ◽

10.1017/s0252921100031407 ◽

1999 ◽

Vol 173 ◽

pp. 185-188

Author(s):

Gy. Szabó ◽

K. Sárneczky ◽

L.L. Kiss

Keyword(s):

Error Analysis ◽

Time Dependence ◽

Theoretical Work ◽

Minor Planet ◽

Minor Planets ◽

New Approach ◽

Preliminary Results ◽

Ccd Observations

AbstractA widely used tool in studying quasi-monoperiodic processes is the O–C diagram. This paper deals with the application of this diagram in minor planet studies. The main difference between our approach and the classical O–C diagram is that we transform the epoch (=time) dependence into the geocentric longitude domain. We outline a rotation modelling using this modified O–C and illustrate the abilities with detailed error analysis. The primary assumption, that the monotonity and the shape of this diagram is (almost) independent of the geometry of the asteroids is discussed and tested. The monotonity enables an unambiguous distinction between the prograde and retrograde rotation, thus the four-fold (or in some cases the two-fold) ambiguities can be avoided. This turned out to be the main advantage of the O–C examination. As an extension to the theoretical work, we present some preliminary results on 1727 Mette based on new CCD observations.

Download Full-text

Cyclic Evolution of Sunspots: Gleaning New Results from Old Data

International Astronomical Union Colloquium ◽

10.1017/s0252921100064411 ◽

2000 ◽

Vol 179 ◽

pp. 163-165

Author(s):

S. K. Solanki ◽

M. Fligge ◽

P. Pulkkinen ◽

P. Hoyng

Keyword(s):

Sunspot Number ◽

Sunspot Cycle ◽

Preliminary Results ◽

Butterfly Diagram

AbstractThe records of sunspot number, sunspot areas and sunspot locations gathered over the centuries by various observatories are reanalysed with the aim of finding as yet undiscovered connections between the different parameters of the sunspot cycle and the butterfly diagram. Preliminary results of such interrelationships are presented.

Download Full-text

Systematic effects in observed parallaxes

International Astronomical Union Colloquium ◽

10.1017/s0252921100073887 ◽

1978 ◽

Vol 48 ◽

pp. 31-35

Author(s):

R. B. Hanson

Keyword(s):

Error Estimates ◽

Zero Point ◽

Absolute Zero ◽

Apparent Magnitude ◽

Coherent System ◽

Preliminary Results ◽

General Catalogue ◽

Systematic Effects ◽

New Evidence ◽

Right Ascension

Several outstanding problems affecting the existing parallaxes should be resolved to form a coherent system for the new General Catalogue proposed by van Altena, as well as to improve luminosity calibrations and other parallax applications. Lutz has reviewed several of these problems, such as: (A) systematic differences between observatories, (B) external error estimates, (C) the absolute zero point, and (D) systematic observational effects (in right ascension, declination, apparent magnitude, etc.). Here we explore the use of cluster and spectroscopic parallaxes, and the distributions of observed parallaxes, to bring new evidence to bear on these classic problems. Several preliminary results have been obtained.

Download Full-text

Quantitative Measurements on the Ion Etching of TMV

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100072125 ◽

1973 ◽

Vol 31 ◽

pp. 336-337

Author(s):

Irwin Bendet ◽

Nabil Rizk

Keyword(s):

Electron Microscope ◽

Tobacco Mosaic Virus ◽

Mosaic Virus ◽

Ion Current ◽

Beam Diameter ◽

Ion Etching ◽

Preliminary Results ◽

Quantitative Measurements ◽

Monitoring Devices

Preliminary results reported last year on the ion etching of tobacco mosaic virus indicated that the diameter of the virus decreased more rapidly at 10KV than at 5KV, perhaps reaching a constant value before disappearing completely.In order to follow the effects of ion etching on TMV more quantitatively we have designed and built a second apparatus (Fig. 1), which incorporates monitoring devices for measuring ion current and vacuum as well as accelerating voltage. In addition, the beam diameter has been increased to approximately 1 cm., so that ten electron microscope grids can be exposed to the beam simultaneously.

Download Full-text

Granular bainite or granular ferrite? A preliminary TEM investigation of an HSLA-100 steel

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100087239 ◽

1991 ◽

Vol 49 ◽

pp. 584-585

Author(s):

R. Varughese ◽

S. W. Thompson ◽

P. R. Howell

Keyword(s):

Room Temperature ◽

Transformation Products ◽

Accurate Description ◽

Granular Bainite ◽

Preliminary Results ◽

The Past ◽

Light Micrograph ◽

Multiphase Reaction ◽

Detailed Nature

Ever since Habraken and Economopoulos first employed the term granular bainite to classify certain unconventional transformation products in continuously cooled steels, the term has been widely accepted and used, despite the lack of a clear consensus as to the detailed nature of the transformation products which constitute granular bainite. This paper presents the preliminary results of a TEM investigation of an 0.04 wt% C, copper-containing steel (designated HSLA-100). It is suggested that the term granular ferrite rather than granular bainite is a more accurate description of this multiphase reaction product.Figure 1 is a light micrograph of a sample which had been air-cooled from 900°C to room temperature. The microstructure is typical of that which has been termed granular bainite in the past and appears to consist of equiaxed ferritic grains together with other minor transformation products. In order to examine these structures in more detail, both continuously cooled and isothermally transformed and quenched materials have been examined with TEM. Granular bainite has been found in virtually all samples.

Download Full-text