Source Zone Natural Attenuation at Petroleum Hydrocarbon Spill Sites-I: Site-Specific Assessment Approach

2006 ◽  
Vol 26 (4) ◽  
pp. 82-92 ◽  
Author(s):  
Paul Johnson ◽  
Paul Lundegard ◽  
Zhuang Liu
2005 ◽  
Vol 125 (1-3) ◽  
pp. 10-16 ◽  
Author(s):  
K.F. Chen ◽  
C.M. Kao ◽  
J.Y. Wang ◽  
T.Y. Chen ◽  
C.C. Chien

BioTech ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 10
Author(s):  
Michael F. Eckerstorfer ◽  
Marcin Grabowski ◽  
Matteo Lener ◽  
Margret Engelhard ◽  
Samson Simon ◽  
...  

An intensely debated question is whether or how a mandatory environmental risk assessment (ERA) should be conducted for plants obtained through novel genomic techniques, including genome editing (GE). Some countries have already exempted certain types of GE applications from their regulations addressing genetically modified organisms (GMOs). In the European Union, the European Court of Justice confirmed in 2018 that plants developed by novel genomic techniques for directed mutagenesis are regulated as GMOs. Thus, they have to undergo an ERA prior to deliberate release or being placed on the market. Recently, the European Food Safety Authority (EFSA) published two opinions on the relevance of the current EU ERA framework for GM plants obtained through novel genomic techniques (NGTs). Regarding GE plants, the opinions confirmed that the existing ERA framework is suitable in general and that the current ERA requirements need to be applied in a case specific manner. Since EFSA did not provide further guidance, this review addresses a couple of issues relevant for the case-specific assessment of GE plants. We discuss the suitability of general denominators of risk/safety and address characteristics of GE plants which require particular assessment approaches. We suggest integrating the following two sets of considerations into the ERA: considerations related to the traits developed by GE and considerations addressing the assessment of method-related unintended effects, e.g., due to off-target modifications. In conclusion, we recommend that further specific guidance for the ERA and monitoring should be developed to facilitate a focused assessment approach for GE plants.


2021 ◽  
Author(s):  
Partha Bose

Abstract One 24” Diameter and around 40 km length Natural Gas pipeline caters as energy life line for Mumbai city; supplying app 4.5 MMSCMD Gas for Auto Sectors (CNG), House Hold (PNG), Power, Fertiliser, Petrochemical Sectors. Though line is equipped with Launcher & Receiver; but onward became challenging one for executing pigging for many constraints: - Presence of One SR bend - Presence of 1.5 D bends - Presence of 1.5 D bends with Back to Back configuration - Three (3) no Thermal Expansion Loops, in 2 Km stretch passing as above ground pipeline through bridge (above Creek) section The pipe line is passing through High Consequence areas, including its interim stretch of 2km passing as above ground section through bridge structure. Intelligent pigging is an obvious first preference for online precise integrity assessment for any pipeline. Site Specific Assessment, Detail Engineering & Committed approach resulted in Feasibility & Development of ILI Tool, Practical Testing in fore hand before actual pigging & onward Integrity Assessment of the pipeline conducted by accomplishing Successful ILI run.


2012 ◽  
Vol 134 (10) ◽  
Author(s):  
Jinkyu Yang ◽  
Sophia N. Sangiorgio ◽  
Sean L. Borkowski ◽  
Claudio Silvestro ◽  
Luigi De Nardo ◽  
...  

Osteoporosis is a well recognized problem affecting millions of individuals worldwide. The ability to diagnose problems in an effective, efficient, and affordable manner and identify individuals at risk is essential. Site-specific assessment of bone mechanical properties is necessary, not only in the process of fracture risk assessment, but may also be desirable for other applications, such as making intraoperative decisions during spine and joint replacement surgeries. The present study evaluates the use of a one-dimensional granular crystal sensor to measure the elastic properties of bone at selected locations via direct mechanical contact. The granular crystal is composed of a tightly packed chain of particles that interact according to the Hertzian contact law. Such chains represent one of the simplest systems to generate and propagate highly nonlinear acoustic signals in the form of compact solitary waves. First, we investigated the sensitivity of the sensor to known variations in bone density using a synthetic cancellous bone substitute, representing clinical bone quality ranging from healthy to osteoporotic. Once the relationship between the signal response and known bone properties was established, the sensor was used to assess the bone quality of ten human cadaveric specimens. The efficacy and accuracy of the sensor was then investigated by comparing the sensor measurements with the bone mineral density (BMD) obtained using dual-energy x-ray absorptiometry (DEXA). The results indicate that the proposed technique is capable of detecting differences in bone quality. The ability to measure site-specific properties without exposure to radiation has the potential to be further developed for clinical applications.


Sign in / Sign up

Export Citation Format

Share Document