FAULT CONTROLS ON SEDIMENT DISTRIBUTION PATTERNS, LIMÓN BASIN, COSTA RICA

2007 ◽  
Vol 30 (1) ◽  
pp. 25-40 ◽  
Author(s):  
C. Brandes ◽  
A. Astorga ◽  
S. Back ◽  
R. Littke ◽  
J. Winsemann
1996 ◽  
Vol 36 (1) ◽  
pp. 269 ◽  
Author(s):  
P.A. Arditto

This paper presents the results and conclusions of an integrated sequence stratigraphic study of the Callovian marine succession across area 'A' of the Zone of Cooperation (ZOCA). This study utilised wireline log and conventional core data from within ZOCA 91–1 and ZOCA 91–12, and incorporated trade data from adjacent permits, to generate a rational depositional model for the succession. Three distinct third-order sequences have been recognised from the detailed correlation of regional flooding surfaces recognised on wireline log motifs calibrated against conventional core and biostratigraphy. The base of the oldest third-order sequence includes section previously referred to as Plover Formation, and roughly corresponds to the W.digitata/W.indotata zone boundary. The Callovian Unconformity within the ZOCA region is thus relegated to a third-order sequence boundary or disconformity. The term Elang Formation is proposed for this Callovian succession which comprises three third-order sequences mappable across ZOCA. The well-type section for the Elang Formation is Elang-1, and an additional well reference section would be Elang-2, as both these wells contain significant and complementary cored section.Detailed sedimentological studies on conventional core reveal that the Elang Formation comprises a succession of coastal plain to nearshore marine sediments, ranging from low sinuosity fluvial channel, fluvial-dominated deltaic, proximal low sinuosity estuarine channel and distal outer bay sediments. Only minor wave-dominated, open marine shoref ace intervals were interpreted, most of the cored intervals indicating a fluvially-domi-nated shoreline with minimal wave reworking. Isopach and per cent sand maps generated for each third-order sequence comprising the Elang Formation illustrate the successive sediment distribution patterns across ZOCA during the progressive marine transgression from the top of the fluvio-deltaic Plover Formation to the base of the offshore marine Lower Flamingo Group. The sand-trend maps for the three sequences which comprise the Elang Formation indicate a fluvial/estuarine-dominated delta system, sourced from the region of the Laminaria Field, AC/P8, building east and southeast out across the ZOCA region. A modern analogue of this delta system in both size and sedimentation style may be the Brahmaputra/Ganges Delta of East Bengal.


1972 ◽  
Vol 79 (4) ◽  
pp. 284-294 ◽  
Author(s):  
Allen M. Young

A knowledge of life cycle and natural history are often important prerequisites to studies of population biology in butterflies. Although studies on the systematics and broad distribution patterns of that familiar New World Tropical group, the Ithomiinae, have been conducted (Seitz, 194; Fox, 1956; Fox, 1968), a lot remains to be known about the biology of many species in Central America. This is surprising in light of the considerable interest in these butterflies as members of mimicry complexes. In this spirit, this paper summarizes life cycle and natural history data on a clear wing ithoreiine Hymenitis nero (Hewitson) (Nymphalidae: Ithomiinae) in Costa Rica. Similar studies of several other sympatric ithomiines have either been completed (Young, in prep.) or begun, as a preliminary step towards understanding the local patterns of diversity of this family in selected tropical plant communities.


2021 ◽  
Vol 41 (4) ◽  
Author(s):  
Mike Woodborne ◽  
Burg Flemming

AbstractTable Bay, South Africa, is a typical headland-bay system with a shoreline that can be described by a logarithmic spiral. A peculiarity and unique feature of Table Bay is the juxtaposition of Robben Island opposite its headland. As a consequence, the bathymetry defines an ellipsoidal basin which was postulated to potentially resonate in the form of long-period standing waves (seiches). One aim of this study, therefore, was to investigate whether any evidence for such resonant oscillations could be detected in the geomorphology and sediment distribution patterns. Indeed, the ellipsoidal shape of the basin can be framed by two converging log-spirals with their centres located opposite each other, one off Robben Island and the other on the Cape Town side of the bay. The so-called apex line, which divides the two spirals into equal parts is aligned SW–NE, i.e. more or less parallel to the direction of ocean wave propagation. The distribution patterns of all sedimentary parameters were found to be characterised by a strikingly similar trend to either side of the apex line. This supports the hypothesis that the basin of Table Bay appears to resonate in the form of a mode 1 standing wave, with the node positioned above the apex line in the centre of the bay. The maximum period of such a standing wave was calculated to be around 37 min. The study demonstrates that large-scale sediment distribution patterns can reveal the existence of specific hydrodynamic processes in coastal embayments. It is recommended that this phenomenon be investigated in greater detail aimed at verifying the existence of resonant oscillations in Table Bay and, in the event, at establishing its precise nature and trigger mechanism.


Author(s):  
Syahrul Purnawan ◽  
Haekal A. Haridhi ◽  
Ichsan Setiawan ◽  
. Marwantim

Study of sediment distribution at Kuala Gigieng was to assess the information of sediment related to the occurrence of hydro-oceanographic processes. The sediment samples were collected from nine stations using coring method. Granulometric method was used to analyze the grain size distributions. The results showed different sediment distribution patterns in each area at estuary Kuala Gigieng. The outer area of estuary indicated skewed to coarse grains, while at the inner area of estuary indicated skewed to fine grains. Different sediment load transport process was suggested as the cause of differentiated sediment characters.   Keywords: granulometry, grain size, sediment statistic, Kuala Gigieng


2015 ◽  
Vol 7 (1) ◽  
Author(s):  
Syahrul Purnawan ◽  
Haekal A. Haridhi ◽  
Ichsan Setiawan ◽  
. Marwantim

<p><em>Study of sediment distribution at Kuala Gig</em><em>i</em><em>eng was to assess the information of sediment related to the occurrence of</em><em> </em><em>hydro-oceanographic processes. The sediment samples were collected from nine stations using coring method. Granulometri</em><em>c</em><em> method was used to analyze the grain size distributions. The results showed different sediment distribution patterns in each area at estuary Kuala Gig</em><em>i</em><em>eng. The outer area of estuary indicated skewed to coarse grains, while at the inner area of estuary indicat</em><em>e</em><em>d skewed to fine grains. Different sediment load transport process was suggested as the cause of differentiate</em><em>d</em><em> sediment characters.</em><em> </em></p> <p> </p> <strong><em>Keywords: </em></strong><em>granulometry, grain size, sediment statistic, Kuala Gigieng</em>


2011 ◽  
Vol 15 (12) ◽  
pp. 3617-3638 ◽  
Author(s):  
T. Maurer ◽  
A. Schneider ◽  
H. H. Gerke

Abstract. Artificially-created hydrological catchments are characterised by sediment structures from technological construction processes that can potentially be important for modelling of flow and transport and for understanding initial soil and ecosystem development. The subsurface spatial structures of such catchments have not yet been sufficiently explored and described. Our objective was to develop a structure generator programme for modelling the 3-D spatial distribution patterns of dumped sediments depending on the technical earth-moving and deposition processes. We are focussing in a first step on integrating sediment dumping, particle size, and bulk density modification processes on the catchment scale. For the model development, the artificially-constructed hydrological catchment "Chicken Creek" located in Lower Lusatia, Germany, served as an example. The structure generator describes 3-D technological sediment distributions at two scales: (i) for a 2-D-vertical cross-section, texture and bulk density distributions are generated within individual spoil cones that result from mass dumping, particle segregation, and compaction and (ii) for the whole catchment, the spoil cones are horizontally arranged along trajectories of mass dumping controlled by the belt stacker-machine relative to the catchment's clay layer topography. The generated 3-D texture and bulk density distributions are interpolated and visualised as a gridded 3-D-volume body using 3-D computer-aided design software. The generated subsurface sediment distribution for the Chicken Creek catchment was found to correspond to observed patterns already without calibration. Spatial aggregation and interpolation in the gridded volume body modified the generated distributions towards more uniform (unimodal) distributions and lower values of the standard deviations. The modelling approach is generally applicable to all situations where large masses of unconsolidated sediment are moved and dumped thereby allowing generation of basic soil structures and patterns of hydrological systems.


Sign in / Sign up

Export Citation Format

Share Document