Guided bone regeneration using acellular bovine pericardium in a rabbit mandibular model: in-vitro
 and in-vivo
 studies

The design of zirconia-based scaffolds using conventional techniques for bone-regeneration applications has been studied extensively. Similar to dental applications, the use of three-dimensional (3D) zirconia-based ceramics for bone tissue engineering (BTE) has recently attracted considerable attention because of their high mechanical strength and biocompatibility. However, techniques to fabricate zirconia-based scaffolds for bone regeneration are in a stage of infancy. Hence, the biological activities of zirconia-based ceramics for bone-regeneration applications have not been fully investigated, in contrast to the well-established calcium phosphate-based ceramics for bone-regeneration applications. This paper outlines recent research developments and challenges concerning numerous three-dimensional (3D) zirconia-based scaffolds and reviews the associated fundamental fabrication techniques, key 3D fabrication developments and practical encounters to identify the optimal 3D fabrication technique for obtaining 3D zirconia-based scaffolds suitable for real-world applications. This review mainly summarized the articles that focused on in vitro and in vivo studies along with the fundamental mechanical characterizations on the 3D zirconia-based scaffolds.

Download Full-text

Zn-Containing Membranes for Guided Bone Regeneration in Dentistry

Polymers ◽

10.3390/polym13111797 ◽

2021 ◽

Vol 13 (11) ◽

pp. 1797

Author(s):

Manuel Toledano ◽

Marta Vallecillo-Rivas ◽

María T. Osorio ◽

Esther Muñoz-Soto ◽

Manuel Toledano-Osorio ◽

...

Keyword(s):

Mechanical Properties ◽

Bone Regeneration ◽

Bone Healing ◽

Bone Repair ◽

Complex Modulus ◽

Bacterial Colonization ◽

Guided Bone Regeneration ◽

M2 Macrophage

Barrier membranes are employed in guided bone regeneration (GBR) to facilitate bone in-growth. A bioactive and biomimetic Zn-doped membrane with the ability to participate in bone healing and regeneration is necessary. The aim of the present study is to state the effect of doping the membranes for GBR with zinc compounds in the improvement of bone regeneration. A literature search was conducted using electronic databases, such as PubMed, MEDLINE, DIMDI, Embase, Scopus and Web of Science. A narrative exploratory review was undertaken, focusing on the antibacterial effects, physicochemical and biological properties of Zn-loaded membranes. Bioactivity, bone formation and cytotoxicity were analyzed. Microstructure and mechanical properties of these membranes were also determined. Zn-doped membranes have inhibited in vivo and in vitro bacterial colonization. Zn-alloy and Zn-doped membranes attained good biocompatibility and were found to be non-toxic to cells. The Zn-doped matrices showed feasible mechanical properties, such as flexibility, strength, complex modulus and tan delta. Zn incorporation in polymeric membranes provided the highest regenerative efficiency for bone healing in experimental animals, potentiating osteogenesis, angiogenesis, biological activity and a balanced remodeling. Zn-loaded membranes doped with SiO2 nanoparticles have performed as bioactive modulators provoking an M2 macrophage increase and are a potential biomaterial for promoting bone repair. Zn-doped membranes have promoted pro-healing phenotypes.

Download Full-text

In Vitro and In Vivo Evaluation of a nHA/PA66 Composite Membrane for Guided Bone Regeneration

Journal of Biomaterials Science Polymer Edition ◽

10.1163/092050609x12602753096279 ◽

2011 ◽

Vol 22 (1-3) ◽

pp. 263-275 ◽

Cited By ~ 15

Author(s):

Jidong Li ◽

Yi Man ◽

Yi Zuo ◽

Li Zhang ◽

Cui Huang ◽

...

Keyword(s):

Bone Regeneration ◽

Composite Membrane ◽

Guided Bone Regeneration ◽

In Vivo Evaluation

Download Full-text

In Vitro Physico-Chemical Characterization and Standardized In Vivo Evaluation of Biocompatibility of a New Synthetic Membrane for Guided Bone Regeneration

Materials ◽

10.3390/ma12071186 ◽

2019 ◽

Vol 12 (7) ◽

pp. 1186

Author(s):

Lívia da Costa Pereira ◽

Carlos Fernando de Almeida Barros Mourão ◽

Adriana Terezinha Neves Novellino Alves ◽

Rodrigo Figueiredo de Brito Resende ◽

Marcelo José Pinheiro Guedes de Uzeda ◽

...

Keyword(s):

Bone Regeneration ◽

Chemical Properties ◽

Chemical Characterization ◽

Guided Bone Regeneration ◽

Tissue Reaction ◽

In Vivo Evaluation ◽

Physico Chemical ◽

Tissue Reactions

This study’s aim was to evaluate the biocompatibility and bioabsorption of a new membrane for guided bone regeneration (polylactic-co-glycolic acid associated with hydroxyapatite and β-tricalcium phosphate) with three thicknesses (200, 500, and 700 µm) implanted in mice subcutaneously. Scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and the quantification of carbon, hydrogen and nitrogen were used to characterize the physico-chemical properties. One hundred Balb-C mice were divided into 5 experimental groups: Group 1—Sham (without implantation); Group 2—200 μm; Group 3—500 μm; Group 4—700 μm; and Group 5—Pratix®. Each group was subdivided into four experimental periods (7, 30, 60 and 90 days). Samples were collected and processed for histological and histomorphometrical evaluation. The membranes showed no moderate or severe tissue reactions during the experimental periods studied. The 500-μm membrane showed no tissue reaction during any experimental period. The 200-μm membrane began to exhibit fragmentation after 30 days, while the 500-μm and 700-µm membranes began fragmentation at 90 days. All membranes studied were biocompatible and the 500 µm membrane showed the best results for absorption and tissue reaction, indicating its potential for clinical guided bone regeneration.

Download Full-text