scholarly journals Biometrical study of the benthic foraminifera Cribroelphidium oregonense and morphological features of its deformed individuals

2006 ◽  
Vol 29 (1) ◽  
pp. 379-382
Author(s):  
Kohei Abe ◽  
Shiro Hasegawa
Keyword(s):  
Benthic Foraminifera ◽  
Morphological Features ◽  
Biometrical Study

scholarly journals Fine structure of the spermatozoon in three species of Cambaridae (Arthropoda: Crustacea: Decapoda)Cambarus robustus,Orconectes propinquusandOrconectes rusticus: a comparative biometrical study

PeerJ ◽  
2016 ◽  
Vol 4 ◽  
pp. e2363 ◽  
Author(s):  
Buket Yazicioglu ◽  
Přemek Hamr ◽  
Pavel Kozák ◽  
Antonín Kouba ◽  
Hamid Niksirat
Keyword(s):  
Fine Structure ◽  
Morphological Feature ◽  
Anterior Part ◽  
Morphological Features ◽  
Intermediate Position ◽  
Freshwater Crayfish ◽  
Orconectes Rusticus ◽  
Whole Cell ◽  
Orconectes Propinquus ◽  
Biometrical Study

The ultrastructure of spermatozoa in three species of cambarid crayfish,Cambarus robustus,Orconectes propinquus, andOrconectes rusticus, were studied and compared with eight previously studied species from different crayfish families using morphological features and biometrical data. The ultrastructure of spermatozoa show a generally conserved pattern including an acrosome and nucleus in the anterior and posterior parts of the cell, respectively, radial arms that wrap around the nucleus, and the whole cell is enclosed by an extracellular capsule. The most outstanding morphological feature in spermatozoa of three studied cambarid crayfish is the crest-like protrusions in the anterior part of the acrosome that can be used as one of the features for distinguishing the members of this family. Results of biometrical data reveal that acrosome size in the representatives of Parastacidae are the smallest, while representatives of Astacidae show the biggest acrosome. The acrosome size in species belonging to Cambaridae occupy an intermediate position between the two other families of freshwater crayfish. In conclusion, a combination of morphological features and biometrical data of spermatozoa can help distinguishing different species of the freshwater crayfish.

Benthic foraminiferal zonation in deep-water carbonate platform margin environments, northern Little Bahama Bank

1988 ◽  
Vol 62 (01) ◽  
pp. 1-8 ◽  
Author(s):  
Ronald E. Martin
Keyword(s):  
Deep Water ◽  
Benthic Foraminifera ◽  
Carbonate Platform ◽  
Sedimentary Facies ◽  
Depositional Environments ◽  
Near Surface ◽  
Sediment Gravity Flows ◽  
Gravity Flows ◽  
Platform Margin ◽  
Water Carbonate

The utility of benthic foraminifera in bathymetric interpretation of clastic depositional environments is well established. In contrast, bathymetric distribution of benthic foraminifera in deep-water carbonate environments has been largely neglected. Approximately 260 species and morphotypes of benthic foraminifera were identified from 12 piston core tops and grab samples collected along two traverses 25 km apart across the northern windward margin of Little Bahama Bank at depths of 275-1,135 m. Certain species and operational taxonomic groups of benthic foraminifera correspond to major near-surface sedimentary facies of the windward margin of Little Bahama Bank and serve as reliable depth indicators. Globocassidulina subglobosa, Cibicides rugosus, and Cibicides wuellerstorfi are all reliable depth indicators, being most abundant at depths >1,000 m, and are found in lower slope periplatform aprons, which are primarily comprised of sediment gravity flows. Reef-dwelling peneroplids and soritids (suborder Miliolina) and rotaliines (suborder Rotaliina) are most abundant at depths <300 m, reflecting downslope bottom transport in proximity to bank-margin reefs. Small miliolines, rosalinids, and discorbids are abundant in periplatform ooze at depths <300 m and are winnowed from the carbonate platform. Increased variation in assemblage diversity below 900 m reflects mixing of shallow- and deep-water species by sediment gravity flows.

Montmorillonite Dendrites

1974 ◽  
Vol 32 ◽  
pp. 454-455
Author(s):  
Necip Güven ◽  
Rodney W. Pease
Keyword(s):  
Crystal Growth ◽  
Growth Mechanism ◽  
Growth Front ◽  
Morphological Features ◽  
Dendritic Crystal ◽  
Crystal Growth Mechanism

Morphological features of montmorillonite aggregates in a large number of samples suggest that they may be formed by a dendritic crystal growth mechanism (i.e., tree-like growth by branching of a growth front).

Polymer Morphology Revealed by Staining Techniques

1981 ◽  
Vol 39 ◽  
pp. 340-341
Author(s):  
A. C. Reimschuessel ◽  
V. Kramer
Keyword(s):  
Polymer Melt ◽  
Nylon 6 ◽  
Morphological Features ◽  
Negative Staining ◽  
Polymer Morphology ◽  
Crystallizable Polymer ◽  
Staining Techniques ◽  
Long Chain

Staining techniques can be used for either the identification of different polymers or for the differentiation of specific morphological domains within a given polymer. To reveal morphological features in nylon 6, we choose a technique based upon diffusion of the staining agent into accessible regions of the polymer.When a crystallizable polymer - such as nylon 6 - is cooled from the melt, lamellae form by chainfolding of the crystallizing long chain macromolecules. The regions between adjacent lamellae represent the less ordered amorphous domains into which stain can diffuse. In this process the lamellae will be “outlined” by the dense stain, giving rise to contrast comparable to that obtained by “negative” staining techniques.If the cooling of the polymer melt proceeds relatively slowly - as in molding operations - the lamellae are usually arranged in a radial manner. This morphology is referred to as spherulitic.

Morphologies of Nonadherent Al2O3 and Matching Substrate Surfaces

1972 ◽  
Vol 30 ◽  
pp. 524-525
Author(s):  
C. S. Giggins ◽  
J. K. Tien ◽  
B. H. Kear ◽  
F. S. Pettit
Keyword(s):  
Electron Microscopy ◽  
Oxide Scale ◽  
Oxidation Resistance ◽  
Substrate Surface ◽  
Morphological Features ◽  
Thermally Induced ◽  
Oxide Spallation ◽  
Oxidation Resistant ◽  
Induced Stresses ◽  
Substrate Surfaces

The performance of most oxidation resistant alloys and coatings is markedly improved if the oxide scale strongly adheres to the substrate surface. Consequently, in order to develop alloys and coatings with improved oxidation resistance, it has become necessary to determine the conditions that lead to spallation of oxides from the surfaces of alloys. In what follows, the morphological features of nonadherent Al2O3, and the substrate surfaces from which the Al2O3 has spalled, are presented and related to oxide spallation.The Al2O3, scales were developed by oxidizing Fe-25Cr-4Al (w/o) and Ni-rich Ni3 (Al,Ta) alloys in air at 1200°C. These scales spalled from their substrates upon cooling as a result of thermally induced stresses. The scales and the alloy substrate surfaces were then examined by scanning and replication electron microscopy.The Al2O3, scales from the Fe-Cr-Al contained filamentary protrusions at the oxide-gas interface, Fig. 1(a). In addition, nodules of oxide have been developed such that cavities were formed between the oxide and the substrate, Fig. 1(a).

Etching of LLDPE and LLDPE/HDPE blends

1996 ◽  
Vol 54 ◽  
pp. 200-201
Author(s):  
M. S. Bischel ◽  
J. M. Schultz
Keyword(s):  
Potassium Permanganate ◽  
Morphological Features ◽  
Narrow Fraction ◽  
Potassium Permanganate Solution ◽  
Commercial Applications ◽  
Microscopy Techniques

Despite its rapidly growing use in commercial applications, the morphology of LLDPE and its blends has not been thoroughly studied by microscopy techniques. As part of a study to examine the morphology of a LLDPE narrow fraction and its blends with HDPE via SEM, TEM and AFM, an appropriate etchant is required. However, no satisfactory recipes could be found in the literature. Mirabella used n-heptane, a solvent for LLDPE, as an etchant to reveal certain morphological features in the SEM, including faint banding in spherulites. A 1992 paper by Bassett included a TEM micrograph of an axialite of LLDPE, etched in a potassium permanganate solution, but no details were given.Attempts to use n-heptane, at 60°C, as an etchant were unsuccessful: depending upon thickness, samples swelled and increased in diameter by 5-10% or more within 15 minutes. Attempts to use the standard 3.5% potassium permanganate solution for HDPE were also unsuccessful: the LLDPE was severely overetched. Weaker solutions were also too severe.

HREM image simulations for supported metal particle catalysts

1993 ◽  
Vol 51 ◽  
pp. 736-737 ◽  
Author(s):  
Ming-Hui Yao ◽  
David J. Smith
Keyword(s):  
Fine Particles ◽  
Amorphous Material ◽  
Chemical Properties ◽  
Morphological Features ◽  
Metal Particles ◽  
Plan View ◽  
Profile View ◽  
Imaging Conditions ◽  
Image Simulations ◽  
Supported Metal

The chemical properties of catalysts often depend on the size, shape and structure of the supported metal particles. To characterize these morphological features and relate them to catalysis is one of the main objectives for HREM study of catalysts. However, in plan view imaging, details of the shape and structure of ultra-fine supported particles (<2nm) are often obscured by the overlapping contrast from the support, and supported sub-nanometer particles are sometimes even invisible. Image simulations may help in the interpretation at HREM images of supported particles in particular to extract useful information about the size, shape and structure of the particles. It should also be a useful tool for evaluating the imaging conditions in terms of visibility of supported particles. P. L. Gai et al have studied contrast from metal particles supported on amorphous material using multislice simulations. In order to better understand the influence of a crystalline support on the visibility and apparent morphological features of supported fine particles, we have calculated images of Pt and Re particles supported on TiO2(rutile) in both plan view and profile view.

113 Morphological features of cardiomyopathy in L345P desmin transgenic mice

2003 ◽  
Vol 2 (1) ◽  
pp. 15-16
Author(s):  
A KOSTAREVA ◽  
G SJOBERG ◽  
K AMINEVA ◽  
A GUDKOVA ◽  
T SEJERSEN ◽  
...  
Keyword(s):  
Transgenic Mice ◽  
Morphological Features
Sign in / Sign up

Export Citation Format

Share Document