Darryl E. Metzger Memorial Session Paper: An Account of Free-Stream-Turbulence Length Scale on Laminar Heat Transfer

1995 ◽  
Vol 117 (3) ◽  
pp. 401-406 ◽  
Author(s):  
K. Dullenkopf ◽  
R. E. Mayle
Keyword(s):  
Heat Transfer ◽  
Free Stream ◽  
Dominant Frequency ◽  
Length Scale ◽  
Free Stream Turbulence ◽  
Laminar Boundary Layers ◽  
Session Paper ◽  
Turbulence Length ◽  
Effective Intensity ◽  
Turbulence Length Scale

The effect of length scale in free-stream turbulence is considered for heat transfer in laminar boundary layers. A model is proposed that accounts for an “effective” intensity of turbulence based on a dominant frequency for a laminar boundary layer. Assuming a standard turbulence spectral distribution, a new turbulence parameter that accounts for both turbulence level and length scale is obtained and used to correlate heat transfer data for laminar stagnation flows. The result indicates that the heat transfer for these flows is linearly dependent on the “effective” free-stream turbulence intensity.

scholarly journals An Account of Free-Stream-Turbulence Length Scale on Laminar Heat Transfer

1994 ◽  
Author(s):  
K. Dullenkopf ◽  
R. E. Mayle
Keyword(s):  
Heat Transfer ◽  
Free Stream ◽  
Dominant Frequency ◽  
Length Scale ◽  
Turbulence Parameter ◽  
Free Stream Turbulence ◽  
Laminar Boundary Layers ◽  
Turbulence Length ◽  
Effective Intensity ◽  
Turbulence Length Scale

The effect of length scale in free-stream turbulence is considered for heat transfer in laminar boundary layers. A model is proposed which accounts for an “effective” intensity of turbulence based on a dominant frequency for a laminar boundary layer. Assuming a standard turbulence spectral distribution, a new turbulence parameter which accounts for both turbulence level and length scale is obtained and used to correlate heat transfer data for laminar stagnation flows. The result indicates that the heat transfer for these flows is linearly dependent on the “effective” free-stream turbulence intensity.

Effect of Free-Stream Turbulence on Heat Transfer and Fluid Flow in a Transonic Turbine Stage

2006 ◽  
Author(s):  
F. Mumic ◽  
B. Sunden
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Turbulence Intensity ◽  
Rotational Speed ◽  
Free Stream ◽  
Length Scale ◽  
Turbine Stage ◽  
Free Stream Turbulence ◽  
Turbulence Length ◽  
Turbulence Length Scale

In the present work, a numerical study has been performed to simulate the effect of free-stream turbulence, length scale and variations in rotational speed of the rotor on heat transfer and fluid flow for a transonic high-pressure turbine stage with tip clearance. The stator and rotor rows interact via a mixing plane, which allows the stage to be computed in a steady manner. The focus is on turbine aerodynamics and heat transfer behavior at the mid-span location, and at the rotor tip and casing region. The results of the fully 3D CFD simulations are compared with experimental results available for the so-called MT1 turbine stage. The predicted heat transfer and static pressure distributions show reasonable agreement with the experimental data. In general, the local Nusselt number increases, at the same turbulence length scale, as the turbulence intensity increases, and the location of the suction side boundary layer transition moves upstream towards the blade leading edge. Comparison of the different length scales at the same turbulence intensity shows that the stagnation heat transfer was significantly increased as the length scale increased. However, the length scale evidenced no significant effects on blade tip or rotor casing heat transfer. Also, the results presented in this paper show that the rotational speed in addition to the turbulence intensity and length scale has an important contribution to the turbine blade aerodynamics and heat transfer.

scholarly journals Measurements of the Effect of Free-Stream Turbulence Length Scale on Heat Transfer

1992 ◽  
Author(s):  
R. W. Moss ◽  
M. L. G. Oldfield
Keyword(s):  
Heat Transfer ◽  
Free Stream ◽  
Plate Boundary ◽  
Length Scale ◽  
Turbulence Scale ◽  
Free Stream Turbulence ◽  
High Turbulence ◽  
Gas Turbine Heat Transfer ◽  
Turbulence Length ◽  
Turbulence Length Scale

The effects of free-stream turbulence scale on heat transfer through a turbulent flat plate boundary layer have been measured. A variety of turbulence spectra were produced by parallel bar grids. The design of these was guided by previous measurements of combustion chamber turbulence. Heat transfer was measured transiently using thin film gauges. The heat transfer to the plate was found to be a function of turbulence integral length scale as well as intensity, and is of relevance to gas turbine heat transfer where aerofoils are subject to high turbulence levels from the combustor. Enhancement factors of up to 40% were experienced and the results extend conclusions drawn by other workers to higher turbulence levels and scales.

scholarly journals The Effects of Incident Turbulence and Moving Wakes on Laminar Heat Transfer in Gas Turbines

1992 ◽  
Author(s):  
K. Dullenkopf ◽  
R. E. Mayle
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Gas Turbines ◽  
Free Stream ◽  
Cross Flow ◽  
Turbulence Parameter ◽  
Constant Acceleration ◽  
Free Stream Turbulence ◽  
Laminar Boundary Layers ◽  
Good Agreement

The effect of free-stream turbulence and moving wakes on augmenting heat transfer in accelerating laminar boundary layers is considered. First, the the effect of free-stream turbulence is re-examined in terms of a Nusselt number and turbulence parameter which correctly account for the free-stream acceleration and a correlation for both cylinders in cross flow and airfoils with regions of constant acceleration is obtained. This correlation is then used in a simple quasi-steady model to predict the effect of periodically passing wakes on airfoil laminar heat transfer. A comparison of the predictions with measurements shows good agreement.

The Effects of Freestream Turbulence, Turbulence Length Scale, and Exit Reynolds Number on Turbine Blade Heat Transfer in a Transonic Cascade

2010 ◽  
Vol 133 (1) ◽  
Author(s):  
J. S. Carullo ◽  
S. Nasir ◽  
R. D. Cress ◽  
W. F. Ng ◽  
K. A. Thole ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Turbine Blade ◽  
Surface Heat ◽  
Length Scale ◽  
Freestream Turbulence ◽  
Surface Heat Transfer ◽  
Mach Numbers ◽  
Turbulence Length ◽  
Turbulence Length Scale

This paper experimentally investigates the effect of high freestream turbulence intensity, turbulence length scale, and exit Reynolds number on the surface heat transfer distribution of a turbine blade at realistic engine Mach numbers. Passive turbulence grids were used to generate freestream turbulence levels of 2%, 12%, and 14% at the cascade inlet. The turbulence grids produced length scales normalized by the blade pitches of 0.02, 0.26, and 0.41, respectively. Surface heat transfer measurements were made at the midspan of the blade using thin film gauges. Experiments were performed at the exit Mach numbers of 0.55, 0.78, and 1.03, which represent flow conditions below, near, and above nominal conditions. The exit Mach numbers tested correspond to exit Reynolds numbers of 6×105, 8×105, and 11×105, based on true chord. The experimental results showed that the high freestream turbulence augmented the heat transfer on both the pressure and suction sides of the blade as compared with the low freestream turbulence case. At nominal conditions, exit Mach 0.78, average heat transfer augmentations of 23% and 35% were observed on the pressure side and suction side of the blade, respectively.

Free-Stream Turbulence From a Circular Wall Jet on a Flat Plate Heat Transfer and Boundary Layer Flow

1989 ◽  
Vol 111 (1) ◽  
pp. 78-86 ◽  
Author(s):  
R. MacMullin ◽  
W. Elrod ◽  
R. Rivir
Keyword(s):  
Heat Transfer ◽  
Turbulence Intensity ◽  
Free Stream ◽  
Flow Characteristics ◽  
Surface Profile ◽  
Constant Heat Flux ◽  
Length Scale ◽  
Wall Jet ◽  
Reynolds Analogy ◽  
Free Stream Turbulence

The effects of the longitudinal turbulence intensity parameter of free-stream turbulence (FST) on heat transfer were studied using the aggressive flow characteristics of a circular tangential wall jet over a constant heat flux surface. Profile measurements of velocity, temperature, integral length scale, and spectra were obtained at downstream locations (2 to 20 x/D) and turbulence intensities (7 to 18 percent). The results indicated that the Stanton number (St) and friction factor (Cf) increased with increasing turbulence intensity. The Reynolds analogy factor (2St/Cf) increased up to turbulence intensities of 12 percent, then became constant, and decreased after 15 percent. This factor was also found to be dependent on the Reynolds number (Rex) and plate configuration. The influence of length scale, as found by previous researchers, was inconclusive at the conditions tested.

The Effects of Freestream Turbulence, Turbulence Length Scale and Exit Reynolds Number on Turbine Blade Heat Transfer in a Transonic Cascade

2007 ◽  
Author(s):  
J. S. Carullo ◽  
S. Nasir ◽  
R. D. Cress ◽  
W. F. Ng ◽  
K. A. Thole ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Turbine Blade ◽  
Surface Heat ◽  
Length Scale ◽  
Freestream Turbulence ◽  
Surface Heat Transfer ◽  
Mach Numbers ◽  
Turbulence Length ◽  
Turbulence Length Scale

This paper experimentally investigates the effect of high freestream turbulence intensity, turbulence length scale, and exit Reynolds number on the surface heat transfer distribution of a turbine blade at realistic engine Mach numbers. Passive turbulence grids were used to generate freestream turbulence levels of 2%, 12%, and 14% at the cascade inlet. The turbulence grids produced length scales normalized by the blade pitch of 0.02, 0.26, and 0.41, respectively. Surface heat transfer measurements were made at the midspan of the blade using thin film gauges. Experiments were performed at exit Mach numbers of 0.55, 0.78 and 1.03 which represent flow conditions below, near, and above nominal conditions. The exit Mach numbers tested correspond to exit Reynolds numbers of 6 × 105, 8 × 105, and 11 × 105, based on true chord. The experimental results showed that the high freestream turbulence augmented the heat transfer on both the pressure and suction sides of the blade as compared to the low freestream turbulence case. At nominal conditions, exit Mach 0.78, average heat transfer augmentations of 23% and 35% were observed on the pressure side and suction side of the blade, respectively.

Sign in / Sign up

Export Citation Format

Share Document