Shape Optimal Structural Design Using Boundary Elements and Minimum Compliance Techniques

1984 ◽  
Vol 106 (4) ◽  
pp. 518-523 ◽  
Author(s):  
C. A. Mota Soares ◽  
H. C. Rodrigues ◽  
K. K. Choi
Keyword(s):  
Optimal Design ◽  
Structural Design ◽  
Degrees Of Freedom ◽  
Boundary Elements ◽  
Linearization Method ◽  
Two Dimensional ◽  
Structural Components ◽  
Advantages And Disadvantages ◽  
Minimum Compliance ◽  
Element Technique

Shape optimal design of two-dimensional elastic components is formulated using boundary elements. The design objective is to minimize compliance of the structure, subject to an area constraint. All degrees of freedom of the model are at the boundary and there is no need for calculating displacements and stresses in the domain. Formulations based on linear and quadratic boundary elements are developed. The corresponding nonlinear programing problem is solved by Pshenichny’s linearization method. The model is applied to shape optimal design of several elastic structural components. The advantages and disadvantages of the boundary element method over the finite element technique for shape optimal design of structures are discussed, with reference to applications.

Optimization of the Geometry of Shafts Using Boundary Elements

1984 ◽  
Vol 106 (2) ◽  
pp. 199-202 ◽  
Author(s):  
C. A. Mota Soares ◽  
H. C. Rodrigues ◽  
L. M. Oliveira Faria ◽  
E. J. Haug
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Nonlinear Programming ◽  
Boundary Element Method ◽  
Optimal Design ◽  
Boundary Elements ◽  
Linearization Method ◽  
Nonlinear Programming Problem ◽  
The Finite Element Method ◽  
Element Method

The problem of the optimization of the geometry of shafts is formulated in terms of boundary elements. The corresponding nonlinear programming problem is solved by Pshenichny’s Linearization method. The advantages of the boundary element method over the finite element method for optimal design of shafts are discussed, with reference to the applications.

Three-Dimensional Reconstruction of Two Forms of the Chaperonin GRO EL

1990 ◽  
Vol 48 (1) ◽  
pp. 258-259
Author(s):  
J.L. Carrascosa ◽  
G. Abella ◽  
S. Marco ◽  
M. Muyal ◽  
J.M. Carazo
Keyword(s):  
Three Dimensional ◽  
The Other ◽  
Two Dimensional ◽  
Series Method ◽  
Three Dimensional Reconstruction ◽  
Structural Components ◽  
E Coli ◽  
Dimensional Reconstruction ◽  
Morphogenetic Factors ◽  
Tilt Series

Chaperonins are a class of proteins characterized by their role as morphogenetic factors. They trantsiently interact with the structural components of certain biological aggregates (viruses, enzymes etc), promoting their correct folding, assembly and, eventually transport. The groEL factor from E. coli is a conspicuous member of the chaperonins, as it promotes the assembly and morphogenesis of bacterial oligomers and/viral structures.We have studied groEL-like factors from two different bacteria:E. coli and B.subtilis. These factors share common morphological features , showing two different views: one is 6-fold, while the other shows 7 morphological units. There is also a correlation between the presence of a dominant 6-fold view and the fact of both bacteria been grown at low temperature (32°C), while the 7-fold is the main view at higher temperatures (42°C). As the two-dimensional projections of groEL were difficult to interprete, we studied their three-dimensional reconstruction by the random conical tilt series method from negatively stained particles.

Finite elements-boundary elements coupling for the movement modeling in two-dimensional structures

1992 ◽  
Vol 2 (11) ◽  
pp. 2035-2044 ◽  
Author(s):  
A. Nicolet ◽  
F. Delincé ◽  
A. Genon ◽  
W. Legros
Keyword(s):  
Finite Elements ◽  
Boundary Elements ◽  
Two Dimensional

scholarly journals Cyclic Deformation of Microcantilevers Using In-Situ Micromanipulation

2021 ◽  
Author(s):  
A. H. S. Iyer ◽  
M. H. Colliander
Keyword(s):  
Degrees Of Freedom ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Structural Components ◽  
Cyclic Testing ◽  
Phase Boundaries ◽  
Bulk Specimen ◽  
Arbitrary Position ◽  
Three Degrees Of Freedom

Abstract Background The trend in miniaturisation of structural components and continuous development of more advanced crystal plasticity models point towards the need for understanding cyclic properties of engineering materials at the microscale. Though the technology of focused ion beam milling enables the preparation of micron-sized samples for mechanical testing using nanoindenters, much of the focus has been on monotonic testing since the limited 1D motion of nanoindenters imposes restrictions on both sample preparation and cyclic testing. Objective/Methods In this work, we present an approach for cyclic microcantilever bending using a micromanipulator setup having three degrees of freedom, thereby offering more flexibility. Results The method has been demonstrated and validated by cyclic bending of Alloy 718plus microcantilevers prepared on a bulk specimen. The experiments reveal that this method is reliable and produces results that are comparable to a nanoindenter setup. Conclusions Due to the flexibility of the method, it offers straightforward testing of cantilevers manufactured at arbitrary position on bulk samples with fully reversed plastic deformation. Specific microstructural features, e.g., selected orientations, grain boundaries, phase boundaries etc., can therefore be easily targeted.

scholarly journals Thermos Array: Two-Dimensional Sparse Array with Reduced Mutual Coupling

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Lei Sun ◽  
Minglei Yang ◽  
Baixiao Chen
Keyword(s):  
Closed Form ◽  
Degrees Of Freedom ◽  
Mutual Coupling ◽  
Doa Estimation ◽  
Two Dimensional ◽  
Spatial Smoothing ◽  
Planar Arrays ◽  
Half Wavelength ◽  
Planar Array ◽  
Small Spacing

Sparse planar arrays, such as the billboard array, the open box array, and the two-dimensional nested array, have drawn lots of interest owing to their ability of two-dimensional angle estimation. Unfortunately, these arrays often suffer from mutual-coupling problems due to the large number of sensor pairs with small spacing d (usually equal to a half wavelength), which will degrade the performance of direction of arrival (DOA) estimation. Recently, the two-dimensional half-open box array and the hourglass array are proposed to reduce the mutual coupling. But both of them still have many sensor pairs with small spacing d, which implies that the reduction of mutual coupling is still limited. In this paper, we propose a new sparse planar array which has fewer number of sensor pairs with small spacing d. It is named as the thermos array because its shape seems like a thermos. Although the resulting difference coarray (DCA) of the thermos array is not hole-free, a large filled rectangular part in the DCA can be facilitated to perform spatial-smoothing-based DOA estimation. Moreover, it enjoys closed-form expressions for the sensor locations and the number of available degrees of freedom. Simulations show that the thermos array can achieve better DOA estimation performance than the hourglass array in the presence of mutual coupling, which indicates that our thermos array is more robust to the mutual-coupling array.

Sign in / Sign up

Export Citation Format

Share Document