Tilting-pad journal bearings (TPJBs) ensure rotordynamic stability that could otherwise produce dangerously large amplitude rotor oil-whirl/whip motions in high speed rotating machinery. Currently, highly efficient turbo compressors demand an ever increasing rotor surface speed and specific load on its support bearings. The accurate prediction of bearing performance is vital to guarantee reliable products, specifically with regard to reducing maximum bearing pad temperature and drag power losses, and operating with the least flow rate while still maximizing load capacity. The hydrodynamic pressure and heat generation in an oil film acting on a bearing pad produce significant mechanical and thermal deformations that change the oil film geometry (clearance and preload) to largely affect the bearing performance, static and dynamic. In addition, a high surface speed bearing often operates in the turbulent flow regime that produces a notable increase in power loss and a drop in maximum pad temperature. This paper details a thermoelastohydrodynamic (TEHD) analysis model applied to TPJBs, presents predictions for their steady-load performance, and discusses comparisons with experimental results to validate the model. The test bearing has four pads with a load between pads configuration; its length L = 76.2 mm and shaft diameter D = 101.6 mm (L/D = 0.75). The rotor top speed is 22.6 krpm, i.e. 120 m/s surface speed, and the maximum specific load is 2.94 MPa for an applied load of 23 kN. The test procedure records shaft speed and applied load, oil supply pressure/temperature and flow rate, and also measures the pads’ temperature and shaft temperature, as well as the discharge oil (sump) temperature. The TEHD model couples a generalized Reynolds equation for the hydrodynamic pressure generation with a three-dimensional energy transport equation for the film temperature. The pad mechanical deformation due to pressure utilizes the finite elemental method, whereas an analytical model estimates thermally induced pad crowning deformations. For operation beyond the laminar flow regime, the analysis incorporates the eddy viscosity concept for fully developed turbulent flow operation. Current predictions demonstrate the influence of pressure and temperature fields on the pads mechanical and thermally induced deformation fields, and also show static performance characteristics such as bearing power loss, flow rate, and pad temperatures. The comparisons of test results and analysis results reveal that turbulent flow effects significantly reduce the pads’ maximum temperature while increasing the bearing power loss. Turbulent flow mixing increases the diffusion of thermal energy and makes more uniform the temperature profile across the film.
On the Possibilities of Decreasing Power Loss in Large Tilting Pad Thrust Bearings
