Design and Analysis of 3R2T and 3R3T Parallel Mechanisms With High Rotational Capability

2015 ◽  
Vol 8 (1) ◽  
Author(s):  
Congzhe Wang ◽  
Yuefa Fang ◽  
Sheng Guo
Keyword(s):  
Inverse Kinematics ◽  
Kinematic Model ◽  
Inverse Kinematic ◽  
Velocity Analysis ◽  
Parallel Mechanisms ◽  
Workspace Analysis ◽  
Moving Platform ◽  
Displacement Theory ◽  
Lie Subgroup ◽  
Orientation Workspace

This paper describes the design, kinematics, and workspace analysis of 3R2T and 3R3T parallel mechanisms (PMs) with large rotational angles about three axes. Since the design of PMs with high rotational capability is still a challenge, we propose the use of a new nonrigid (or articulated) moving platform with passive joints in order to reduce the interference between limbs and the moving platform. According to the proposed nonrigid platform and Lie subgroup of displacement theory, several 3R2T and 3R3T PMs are presented. Subsequently, the inverse kinematics and velocity analysis of one of the proposed mechanisms are detailed. Based on the derived inverse kinematic model, the constant-orientation workspace is computed numerically. Then, the analysis of rotational capability about the three axes is performed. The result shows that even if interference and singularity are taken into account, the proposed mechanisms still reveal the high continuously rotational capability about the three axes, by means of actuation redundancy.

Orientation Workspace Analysis of a Novel 3SPS+1PS Symmetrical Parallel Manipulator Based on Unit Quaternion

2011 ◽  
Vol 201-203 ◽  
pp. 1849-1853
Author(s):  
Jing Li Yu ◽  
Gang Cheng ◽  
Shuai Zhang ◽  
De Kun Zhang
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Unit Quaternion ◽  
Structure Characteristics ◽  
Workspace Analysis ◽  
Moving Platform ◽  
Position And Orientation ◽  
4 Degrees Of Freedom ◽  
Orientation Workspace

For a novel 3SPS+1PS parallel manipulator with 4 degrees of freedom including three rotations and one translation, the formulae for solving the inverse kinematics equations are derived based on quaternion method. Unit quaternion is used to represent the position and orientation of moving platform, and the singularities caused by Euler angles are avoided. Combining the topological structure characteristics of the parallel manipulator, it only has three rotations when its moving platform is at a given translation position. Based on the inverse position/pose equations and the all the constraints of the parallel manipulator, the discrete algorithm for the orientation workspaces of 3SPS+1PS parallel manipulator where the moving platform is at some different given translation positions are designed. The research builds the theoretical basis for optimizing the orientation workspace with given position.

A Simple Method for Inverse Kinematic Analysis of the General 6R Serial Robot

2006 ◽  
Author(s):  
Zhi Xin Shi ◽  
Yu Feng Luo ◽  
Lu Bing Hang ◽  
Ting Li Yang
Keyword(s):  
Kinematic Analysis ◽  
Inverse Kinematics ◽  
Algebraic Method ◽  
Inverse Kinematic ◽  
New Method ◽  
One Dimension ◽  
Parallel Mechanisms ◽  
Simple Method ◽  
Inverse Kinematics Problem ◽  
Serial Robot

Because the solution to inverse kinematics problem of the general 5R serial robot is unique and its assembly condition has been derived, a simple effective method for inverse kinematics problem of general 6R serial robot or forward kinematics problem of general 7R single-loop mechanism is presented based on one-dimension searching algorithm. The new method has the following features: (1) Using one-dimension searching algorithm, all the real inverse kinematic solutions are obtained and it has higher computing efficiency; (2) Compared with algebraic method, it has evidently reduced the difficulty of deducing formulas. The principle of the new method can be generalized to kinematic analysis of parallel mechanisms.

scholarly journals Design and Analysis of a Flexible, Elastic, and Rope-Driven Parallel Mechanism for Wrist Rehabilitation

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Zaixiang Pang ◽  
Tongyu Wang ◽  
Junzhi Yu ◽  
Shuai Liu ◽  
Xiyu Zhang ◽  
...  
Keyword(s):  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Inverse Kinematic ◽  
Parallel Structure ◽  
Flexible Joints ◽  
Rehabilitation Robots ◽  
Hybrid Mechanism ◽  
Compression Spring ◽  
Moving Platform

This paper proposes a bionic flexible wrist parallel mechanism to simulate human wrist joints, which is characterized by a rope-driven, compression spring-supported hybrid mechanism. Specifically, to realize the movement of the wrist mechanism, a parallel structure is adopted to support the mobile platform and is controlled by a cable, which plays the role of wrist muscles. Because the compression spring is elastic, it is difficult to directly solve inverse kinematics. To address this problem, the external force acting on the moving platform is firstly equivalent to the vector force and torque at the center of the moving platform. Then, based on inverse kinematic and static analyses, the inverse motion of the robot model can be solved according to the force and torque balance conditions and the lateral spring bending equation of the compression spring. In order to verify the proposed method, kinematics, statics, and parallel mechanism workspace are further analyzed by the software MATLAB. The obtained results demonstrate the effectiveness and feasibility of the designed parallel mechanism. This work offers new insights into the parallel mechanism with flexible joints in replicating the movements of the human wrist, thus promoting the development of rehabilitation robots and rope-driven technology to some extent.

Workspace Analysis and Parameter Optimization of 3-DOF Parallel Mechanism

2013 ◽  
Vol 373-375 ◽  
pp. 2136-2142 ◽  
Author(s):  
Rui Fan ◽  
Huan Liu ◽  
Dan Wang
Keyword(s):  
Parameter Optimization ◽  
Parallel Mechanism ◽  
Structural Parameters ◽  
Kinematic Model ◽  
Inverse Kinematic ◽  
Search Method ◽  
Architecture Design ◽  
Original Volume ◽  
Workspace Analysis ◽  
The Relationship

A spatial 3-DOF translational parallel mechanism is analyzed. Its inverse kinematic model is established. The section view of the workspace of the parallel mechanism is presented via boundary search method under the defined constraints. Considering the workspace volume as the optimization object, the relationship between structural parameters and workspace volume is obtained and the structural parameters to be optimized are determined. Finally, the optimization configuration of the mechanism is obtained. The results show that the volume of the workspace increases 1.55 times as much as the original volume, which lay the foundation for the architecture design.

scholarly journals Analysis of Open Architecture 6R Robot Forward and Inverse Kinematics Adaptive to Structural Variations

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Chong Wang ◽  
Dongxue Liu ◽  
Qun Sun ◽  
Tong Wang
Keyword(s):  
Inverse Kinematics ◽  
Industrial Robot ◽  
Kinematic Model ◽  
Inverse Kinematic ◽  
Open Architecture ◽  
Model Parameters ◽  
Structural Variations ◽  
Robot Controller ◽  
Kinematic Models ◽  
Kinematic Studies

This paper presents a kinematic analysis for an open architecture 6R robot controller, which is designed to control robots made by domestic manufactures with structural variations. Usually, robot kinematic studies are often introduced for specific robot types, and therefore, difficult to apply the kinematic model from one to another robot. This study incorporates most of the robot structural variations in one model so that it is convenient to switch robot types by modifying model parameters. By combining an adequate set of parameters, the kinematic models, especially the inverse kinematics, are derived. The kinematic models are proved to be suitable for many classic industrial robot types, such as Puma560, ABB IRB120/1600, KAWASAKI RS003N/RS010N, FANUC M6iB/M10iA, and therefore be applicable to those with similar structures. The analysis and derivation of the forward and inverse kinematic models are presented, and the results are proven to be accurate.

Kinematic analysis of overconstrained manipulators with partial subspaces using decomposition method

Robotica ◽  
2021 ◽  
pp. 1-16
Author(s):  
Özgün Selvi
Keyword(s):  
Kinematic Analysis ◽  
Decomposition Method ◽  
Degrees Of Freedom ◽  
Additional Data ◽  
Parallel Manipulators ◽  
Inverse Kinematic ◽  
Velocity Analysis ◽  
Workspace Analysis ◽  
Inverse Kinematic Analysis ◽  
Inverse Velocity

SUMMARY Overconstrained manipulators in lower subspaces with unique motions can be created and analyzed. However, far too little attention has been paid to creating a generic method for overconstrained manipulators kinematic analysis. This study aimed to evaluate a generic methodology for kinematic analysis of overconstrained parallel manipulators with partial subspaces (OPM-PS) using decomposition to parallel manipulators (PMs) in lower subspaces. The theoretical dimensions of the method are depicted, and the use of partial subspace for overconstrained manipulators is portrayed. The methodology for the decomposition method is described and exemplified by designing and evaluating the method to two overconstrained manipulators with 5 degrees of freedom (DoF) and 3 DoF. The inverse kinematic analysis is detailed with position analysis and Jacobian along with the inverse velocity analysis. The workspace analysis for the manipulators using the methodology is elaborated with numerical results. The results of the study show that OPM-PS can be decomposed into PMs with lower subspace numbers. As imaginary joints are being utilized in the proposed methodology, it will create additional data to consider in the design process of the manipulators. Thus, it becomes more beneficial in design scenarios that include workspace as an objective.

Extending the workspace of parallel working mechanisms

2008 ◽  
Vol 222 (7) ◽  
pp. 1305-1313 ◽  
Author(s):  
H Alp ◽  
İ Özkol
Keyword(s):  
Material Processing ◽  
Flight Simulation ◽  
Parallel Mechanisms ◽  
Working Mechanism ◽  
Workspace Analysis ◽  
Cylindrical Coordinate ◽  
Robotic Applications ◽  
Orientation Workspace ◽  
Working Mechanisms

The aim of this study is to present a new model to extend the workspace of a parallel working machine in a chosen direction. Therefore, the existing mathematical models are combined and developed to represent the extension of the workspace of a 6° parallel working machine. For this purpose, the 6-3 Stewart platform mechanism (SPM), which is commonly used in robotic applications, material processing, and flight simulation, and the 6-4 SPM have been chosen. Although there are many studies on parallel mechanisms, the workspace analysis of a parallel working mechanism has not yet been generalized. This study determines the workspace of a parallel working mechanism in the direction perpendicular to the moving platform, which is the most workable direction. For these types of working mechanisms, i.e. mechanical tools used for material processing that is forced to move in a certain chosen direction, the determination of the point in that direction at which the workspace is maximum has to be outlined. After carrying out a kinematic analysis, the discretization method, which is based on Euler angles, is used to represent the orientation workspace of these parallel working mechanisms. Additionally, the orientation workspaces of the 6-3 SPM and the 6-4 SPM are compared. Results are presented in a cylindrical coordinate system.

An Analytical Model for Calculating the Workspace of a Flexure Hexapod Nanopositioner

2013 ◽  
Vol 5 (4) ◽  
Author(s):  
Hongliang Shi ◽  
Hai-Jun Su
Keyword(s):  
Analytical Model ◽  
Degrees Of Freedom ◽  
Kinematic Model ◽  
Parallel Mechanisms ◽  
Torsion Angles ◽  
Maximum Deformation ◽  
Practical Applications ◽  
Six Degrees Of Freedom ◽  
Workspace Analysis ◽  
Flexure Joints

This paper presents an analytical model for calculating the workspace of a flexure-based hexapod nanopositioner previously built by the National Institute of Standards and Technology (NIST). This nanopositioner is capable of producing high-resolution motions in six degrees of freedom by actuating linear actuators on a planar tri-stage. However, the workspace of this positioner is still unknown, which limits its uses in practical applications. In this work, we seek to derive a kinematic model for predicting the workspace of such kinds of flexure based platforms by assuming that their workspace is mainly constrained by the deformation of flexure joints. We first study the maximum deformation including bending and torsion angles of an individual flexure joint. We then derive the inverse kinematics and calculation of bending and torsion angles of each wire flexure in the overall mechanism with given position of the top platform center of the hexapod nanopositioner. At last, we compare results with finite element models of the entire platform. This model is beneficial for workspace analysis and optimization for design of compliant parallel mechanisms.

scholarly journals Design and analysis of a class of redundant collaborative manipulators with 2D large rotational angles

2019 ◽  
Vol 15 (1) ◽  
pp. 66-80
Author(s):  
Xiaodong Jin ◽  
Yuefa Fang ◽  
Dan Zhang ◽  
Xueling Luo
Keyword(s):  
Machine Tools ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Rotational Axis ◽  
Revolute Joints ◽  
3D Printers ◽  
Rotational Degrees Of Freedom ◽  
Moving Platform ◽  
Orientation Workspace

AbstractThe parallel spindle heads with high rotational capability are demanded in the area of multi-axis machine tools and 3D printers. This paper focuses on designing a class of 2R1T (R: Rotation; T: Translation) parallel spindle heads and the corresponding collaborative 5-axis manipulators with 2-dimension (2D) large rotational angles. In order to construct 2D rotational degrees of freedom (DOFs), a platform with 2D revolute joints is proposed first. Based on the constraint screw theory, the feasible limbs that can be connected in the platform are synthesized. In order to provide constant rotational axis for the platform, a class of redundant limbs are designed. A class of redundant 2R1T parallel spindle heads is obtained by connecting the redundant limbs with the platform and the redundant characteristics are verified by the modified Grübler-Kutzbach criterion. The corresponding 5-axis collaborative manipulators are presented by constructing a 2-DOF series translational bottom moving platform. The inverse kinematics and the orientation workspace as well as the decoupling characteristics of this type of 2R1T parallel spindle heads are analyzed. The results show that these manipulators have large 2D rotational angles than the traditional A3/Z3 heads and can be potentially used in the application of multi-axis machine tools and the 3D printers.

Type Synthesis of Parallel Mechanisms With a Constant Jacobian Matrix

2018 ◽  
Vol 10 (6) ◽  
Author(s):  
Yanzhi Zhao ◽  
Yachao Cao ◽  
Xianwen Kong ◽  
Tieshi Zhao
Keyword(s):  
Jacobian Matrix ◽  
Screw Theory ◽  
Velocity Analysis ◽  
Parallel Mechanisms ◽  
Input Output ◽  
Type Synthesis ◽  
Analysis And Evaluation ◽  
Analysis Design ◽  
Moving Platform ◽  
And Control

Jacobian matrix plays a key role in the analysis, design, and control of robots. For example, it can be used for the performance analysis and evaluation of parallel mechanisms (PMs). However, the Jacobian matrix of a PM generally varies with the poses of the moving platform in the workspace. This leads to a nonconstant performance index of the PM. PMs with a constant Jacobian matrix have simple kinematics and are easy to design and control. This paper proposes a method for obtaining PMs with a constant Jacobian matrix. First, the criteria for detecting invariance of a Jacobian matrix are obtained based on the screw theory. An approach to the synthesis of PMs with a constant Jacobian matrix is then proposed. Using this approach, PMs with a constant Jacobian matrix are synthesized in two steps: the limb design and the combination of the limbs. Several PMs with a constant Jacobian matrix are obtained. In addition to the translational parallel mechanisms (TPMs) with a constant Jacobian matrix in the literature, the mixed-motion PMs whose moving platform can both translate and rotate with a constant Jacobian matrix are newly identified. The input/output velocity analysis of several PMs is presented to verify that Jacobian matrix of these PMs is constant.

Sign in / Sign up

Export Citation Format

Share Document