Experimental Investigation on the Wake Characteristics and Aeromechanics of Dual-Rotor Wind Turbines

2015 ◽  
Vol 138 (4) ◽  
Author(s):  
Ahmet Ozbay ◽  
Wei Tian ◽  
Hui Hu
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Flow Characteristics ◽  
Wake Flow ◽  
Neutral Stability ◽  
Flow Measurements ◽  
Wake Characteristics

An experimental study was carried out to investigate the aeromechanics and wake characteristics of dual-rotor wind turbines (DRWTs) in either co-rotating or counter-rotating configuration, in comparison to those of a conventional single-rotor wind turbine (SRWT). The experiments were performed in a large-scale aerodynamic/atmospheric boundary layer (AABL) wind tunnel, available at Iowa State University with the oncoming atmospheric boundary-layer (ABL) airflows under neutral stability conditions. In addition to measuring the power output performance of DRWT and SRWT models, static and dynamic wind loads acting on those turbine models were also investigated. Furthermore, a high-resolution digital particle image velocimetry (PIV) system was used to quantify the flow characteristics in the near wakes of the DRWT and SRWT models. The detailed wake-flow measurements were correlated with the power outputs and wind-load measurement results of the wind-turbine models to elucidate the underlying physics to explore/optimize design of wind turbines for higher power yield and better durability.

An Experimental Investigation on the Wake Characteristics and Aeromechanics of Dual-Rotor Wind Turbines

2015 ◽  
Author(s):  
Ahmet Ozbay ◽  
Wei Tian ◽  
Hui Hu
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Flow Characteristics ◽  
Wake Flow ◽  
Neutral Stability ◽  
Flow Measurements ◽  
Wake Characteristics

An experimental study was carried out to investigate the aeromechanics and wake characteristics of dual-rotor wind turbines (DRWTs ) in either co-rotating or counter-rotating configuration, in comparison to those of a conventional single-rotor wind turbine (SRWT). The experiments were performed in a large-scale Aerodynamic/Atmospheric Boundary Layer (AABL) wind tunnel available at Iowa State University with the oncoming Atmospheric Boundary Layer (ABL) airflows under neutral stability conditions. In addition to measuring the power output performance of DRWT and SRWT models, static and dynamic wind loads acting on those turbine models were also investigated. Furthermore, a high resolution digital particle image velocimetry (PIV) system was used to quantify the flow characteristics in the near wakes of the DRWT and SRWT models. The detailed wake flow measurements were correlated with the power outputs and wind load measurement results of the wind turbine models to elucidate the underlying physics to explore/optimize design of wind turbines for higher power yield and better durability.

A Comparative Study of the Wind Loads and Wake Characteristics of a Single-Rotor Wind Turbine and Dual-Rotor Wind Turbines

2014 ◽  
Author(s):  
Ahmet Ozbay ◽  
Wei Tian ◽  
Hui Hu
Keyword(s):  
Turbulent Flow ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Wind Farm ◽  
Wake Flow ◽  
Wind Loads ◽  
Neutral Stability ◽  
Near Wake ◽  
Wake Characteristics

An experimental study was carried out to investigate the aeromechanics and wake characteristics of dual-rotor wind turbines (DRWTs) with co- and counter-rotating configurations, in comparison to those of a conventional singlerotor wind turbine (SRWT), in order to elucidate the underlying physics to explore/optimize design of wind turbines for higher power yield and better durability. The experiments were performed in a large-scale Aerodynamic/Atmospheric Boundary Layer (AABL) wind tunnel under neutral stability conditions. In addition to measuring the power output performance of DRWT and SRWT systems, static and dynamic wind loads acting on those systems were also investigated. Furthermore, a high resolution PIV system was used for detailed near wake flow field measurements (free-run and phase-locked) so as to quantify the near wake turbulent flow structures and observe the transient behavior of the unsteady vortex structures in the wake of DRWT and SRWT systems. In the light of the promising experimental results on DRWTs, this study can be extended further to investigate the turbulent flow in the far wake of DRWTs and utilize multiple DRWTs in different wind farm operations.

Modeling of the atmospheric boundary layer under stability stratification for wind turbine wake production

2019 ◽  
pp. 0309524X1988092
Author(s):  
Mohamed Marouan Ichenial ◽  
Abdellah El-Hajjaji ◽  
Abdellatif Khamlichi
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Wind Farm ◽  
Layer Structure ◽  
Atmospheric Stability ◽  
Weather Conditions ◽  
Boundary Layer Structure

The assessment of climatological site conditions, airflow characteristics, and the turbulence affecting wind turbines is an important phase in developing wake engineering models. A method of modeling atmospheric boundary layer structure under atmospheric stability effects is crucial for accurate evaluation of the spatial scale of modern wind turbines, but by themselves, they are incapable to account for the varying large-scale weather conditions. As a result, combining lower atmospheric models with mesoscale models is required. In order to realize a reasonable approximation of initial atmospheric inflow condition used for wake identification behind an NREL 5-MW wind turbine, different vertical wind profile models on equilibrium conditions are tested and evaluated in this article. Wind farm simulator solvers require massive computing resources and forcing mechanisms tendencies inputs from weather forecast models. A three-dimensional Flow Redirection and Induction in Steady-state engineering model was developed for simulating and optimizing the wake losses of different rows of wind turbines under different stability stratifications. The obtained results were compared to high-fidelity simulation data generated by the famous Simulator for Wind Farm Applications. This work showed that a significant improvement related to atmospheric boundary layer structure can be made to develop accurate engineering wake models in order to reduce wake losses.

Physical Model Study of the Wind Turbine Array Boundary Layer

2014 ◽  
Author(s):  
Kyle Charmanski ◽  
John Turner ◽  
Martin Wosnik
Keyword(s):  
Boundary Layer ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Hot Wire ◽  
Flow Measurements ◽  
Model Study ◽  
Power Rate ◽  
First Results ◽  
Upstream Part ◽  
Measurement Location

First results from an experimental investigation of the fully developed wind turbine array boundary layer are reported, using arrays of up to 100 model wind turbines with a diameter of 0.25 m. The wind turbine array was simulated by a combination of drag-matched porous disks, used in the upstream part of the array, and by a smaller array of realistically scaled 3-bladed wind turbines just upstream of the measurement location. The model array was placed in the 6.0 m × 2.7 m × 72.0 m test section of the UNH Flow Physics Facility. Power, rate of rotation and rotor thrust were measured for select turbines, and hot-wire anemometry was used for flow measurements. Development of a fully developed wind turbine array boundary layer was noted with increase in array size.

scholarly journals On the interaction of very-large-scale motions in a neutral atmospheric boundary layer with a row of wind turbines

2018 ◽  
Vol 841 ◽  
pp. 1040-1072 ◽  
Author(s):  
Asim Önder ◽  
Johan Meyers
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Wind Turbines ◽  
Large Scale ◽  
Reynolds Shear Stress ◽  
Lateral Spreading ◽  
High Momentum ◽  
Eddy Simulation ◽  
Realistic Representation ◽  
Low Pass

Recent experiments have revealed the existence of very long streamwise features, denoted as very-large-scale motions (VLSMs), in the thermally neutral atmospheric boundary layer (ABL) (Hutchins et al., Boundary-Layer Meteorol., vol. 145(2), 2012, pp. 273–306). The aim of our study is to elaborate the role of these large-scale anisotropic patterns in wind-energy harvesting with special emphasis on the organization of turbulent fields around wind turbines. To this end, we perform large-eddy simulation (LES) of a turbine row operating under neutral conditions. The ABL data are produced separately in a very long domain of $240\unicode[STIX]{x1D6FF}$, where $\unicode[STIX]{x1D6FF}$ is the ABL thickness, to ensure a realistic representation for very large scales of $O(10\unicode[STIX]{x1D6FF})$. VLSMs are extracted from the LES database using a cutoff at streamwise wavelength $\unicode[STIX]{x1D706}_{x}=5\unicode[STIX]{x1D6FF}$, or $\unicode[STIX]{x1D706}_{x}=50D$ in terms of turbine diameter. Reynolds averaging of low-pass filtered fields shows that the interaction of VLSMs and turbines produce very-long-wavelength motions in the wake region, which contain approximately $20\,\%$ of the resolved Reynolds shear stress, and $30\,\%$ of the resolved streamwise kinetic energy in the shear layers. To further elucidate these statistics, we conduct a geometrical analysis using conditional averaging based on large-scale low- and high-velocity events. The conditional eddies provide evidence for very long (${\sim}10\unicode[STIX]{x1D6FF}$) and wide (${\sim}\unicode[STIX]{x1D6FF}$) streak–roller structures around the turbine row. Although all of these eddies share the same streak–roller topology, there are remarkable modifications in the morphology of the conditional eddies whose cores are located sideways to the turbines. In these cases, the turbine row pushes the whole low- or high-momentum streak aside, and prevails as a sharp boundary to the low–high-momentum streak pair. In this process, accompanying rollers remain relatively unaffected. This creates a two-way flux towards the turbine row. These observations provide some insights about the high lateral spreading observed in the large-scale Reynolds stress fields.

scholarly journals Evaluation of tilt control for wind-turbine arrays in the atmospheric boundary layer

2021 ◽  
Vol 6 (3) ◽  
pp. 663-675
Author(s):  
Carlo Cossu
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Wind Turbine ◽  
Boundary Layers ◽  
High Speed ◽  
Large Scale ◽  
Passive Control ◽  
Vertical Wind Shear ◽  
Large Power ◽  
Turbine Arrays

Abstract. Wake redirection is a promising approach designed to mitigate turbine–wake interactions which have a negative impact on the performance and lifetime of wind farms. It has recently been found that substantial power gains can be obtained by tilting the rotors of spanwise-periodic wind-turbine arrays. Rotor tilt is associated with the generation of coherent streamwise vortices which deflect wakes towards the ground and, by exploiting the vertical wind shear, replace them with higher-momentum fluid (high-speed streaks). The objective of this work is to evaluate power gains that can be obtained by tilting rotors in spanwise-periodic wind-turbine arrays immersed in the atmospheric boundary layer and, in particular, to analyze the influence of the rotor size on power gains in the case where the turbines emerge from the atmospheric surface layer. We show that, for the case of wind-aligned arrays, large power gains can be obtained for positive tilt angles of the order of 30∘. Power gains are substantially enhanced by operating tilted-rotor turbines at thrust coefficients higher than in the reference configuration. These power gains initially increase with the rotor size reaching a maximum for rotor diameters of the order of 3.6 boundary layer momentum thicknesses (for the considered cases) and decrease for larger sizes. Maximum power gains are obtained for wind-turbine spanwise spacings which are very similar to those of large-scale and very-large-scale streaky motions which are naturally amplified in turbulent boundary layers. These results are all congruent with the findings of previous investigations of passive control of canonical boundary layers for drag-reduction applications where high-speed streaks replaced wakes of spanwise-periodic rows of wall-mounted roughness elements.

Sign in / Sign up

Export Citation Format

Share Document