Comparative Analysis of Intelligence Optimization Algorithms in the Thermo-Economic Performance of an Energy Recovery System Based on Organic Rankine Cycle

2021 ◽  
Vol 143 (11) ◽  
Author(s):  
Jorge Duarte-Forero ◽  
Luis Obregón-Quiñones ◽  
Guillermo Valencia-Ochoa

Abstract This paper compares the performance of a group of intelligent algorithms such as the genetic algorithm (GA), particle swarm optimization (PSO), and repulsive particle swarm optimization (RPSO) based on the optimization of thermo-economic indicators such as the payback period (PBP), the levelized energy cost (LEC), the specific investment cost (SIC), and also in the optimization of the thermodynamic process (net power output) of an energy recovery system in a 2 MW natural gas internal combustion engine based on an organic Rankine cycle. Four parameters were considered to analyze and compare the performance of these algorithms: integral of squared error (ISE), integral of absolute error (IAE), integral of time-weighted absolute error (ITAE), and the integral of time-weighted squared error (ITSE). Analyses of variances (ANOVA) were proposed for each of the parameters studied. The PSO and RPSO algorithms presented the best performance in terms of the mean and the standard deviation of the ISE, IAE, ITAE, and ITSE parameters. Significant differences were not found between the three algorithms in terms of the parameters considered. However, significant differences did exist when comparing groups (pairs) of algorithms considering a significance level of 5%. The ANOVA analysis showed that ITAE was the most affected parameter by population size, while the IAE and ITSE parameters were the less affected. In the optimization, the PSO algorithm obtained the best performance in terms of convergence with values of 0.1110 USD/kWh (LCOE), 4.6971 years (PBP), 1114 USD/kWh (SIC), and 173.64 kW (Wnet). PSO-based algorithms obtained better performance in computational terms compared with the genetic algorithms.

2016 ◽  
Author(s):  
Li Zhou ◽  
Gangfeng Tan ◽  
Xuexun Guo ◽  
Ming Chen ◽  
Kangping Ji ◽  
...  

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5253
Author(s):  
Andrea De Pascale

This book contains the successful invited submissions [...]


Energies ◽  
2015 ◽  
Vol 8 (9) ◽  
pp. 9751-9776 ◽  
Author(s):  
Hongjin Wang ◽  
Hongguang Zhang ◽  
Fubin Yang ◽  
Songsong Song ◽  
Ying Chang ◽  
...  

2020 ◽  
Vol 14 ◽  
Author(s):  
Gang Liu ◽  
Dong Qiu ◽  
Xiuru Wang ◽  
Ke Zhang ◽  
Huafeng Huang ◽  
...  

Background: The PWM Boost converter is a strongly nonlinear discrete system, especially when the input voltage or load varies widely, therefore, tuning the control parameters of which is a challenge work. Objective: In order to overcome the issues, particle swarm optimization (PSO) is employed for tuning the parameters of a sliding mode controller of a boost converter. Methods: Based on the analysis of the Boost converter model and its non-linear characteristics, a mathematic model of a boost converter with a sliding mode controller is built firstly. Then, the parameters of the Boost controller are adjusted based on the integrated time and absolute error (ITAE), integral square error (ISE) and integrated absolute error (IAE) indexes by PSO. Results: Simulation verification was performed, and the results show that the controllers tuned by the three indexes all have excellent robust stability. Conclusion: The controllers tuned by ITAE and ISE indexes have excellent steady-state performance, but the overshoot is large during the startup. The controller tuned by IAE index has better startup performance and slightly worse steady-state performance.


Sign in / Sign up

Export Citation Format

Share Document